Modbus Device DirectoryThe Modbus Organization maintains a database of Modbus devices as a serviceto users looking for such devices for their applications. This list is always growing and changing. If you are a supplier and do not find your devices listed here, please visit our Contact Page to find outhow to be listed. Please note that the information below is provided by therespective suppliers, and that product listings do not constitute any endorsement or warranty on the part of the Modbus Organization. |
Download Latest SUNIX 2-Port Serial Card driver for windows 7, vista,xp,windows8. It's for P35-S3G.
Company | Device | Description |
---|---|---|
Control Solutions, Inc. | Babel Buster SPX | Network Gateway: Babel Buster SPX is a Modbus-to-Modbus and a Modbus-to-SNMP Gateway. The SPX is more than a protocol translator. It is a self-contained server that collects and distributes data according to the rules you create. The most common use of the SPX is to map Modbus RTU and/or Modbus TCP devices to SNMP. The SNMP manager can use SNMP Get to retrieve contents of any mapped Modbus register. In addition, the SPX uses threshold rule templates to continuously monitor Modbus data and generate SNMP Traps upon sensing of 'alarm' conditions. |
Control Solutions, Inc. | Babel Buster SP | Network Gateway: Babel Buster SP is more than a protocol translator. It is a self contained server that collects and distributes data according to the rules you create. You can even use Babel Buster as an alarm notification device. Primary applications for Babel Buster SP are serial to Ethernet conversion of Modbus devices, and SNMP access to serial or Ethernet Modbus devices. The Modbus RTU port can operate as master or slave. The Modbus TCP interface can operate as master and slave at the same time. Babel Buster SP is an SNMP agent only. |
Control Solutions, Inc. | i.CanDoIt AddMe III | I/O Interface: i.CanDoIt AddMe III provides a Modbus-enabled standalone web server with scheduling, data logging, alarm monitoring with event notification, RTU to TCP gateway capability, and user programmability. The server is configured via a standard web browser and rule-based templates for alarms, event notifications, I/O point configuration and all other features. The embedded server can be fully customized by the user's HTML and JavaScript wrapper. Modbus TCP client and server, and Modbus RTU master, are included. |
Control Solutions, Inc. | i.CanDoIt AddMe Jr. | I/O Interface: i.CanDoIt AddMe Jr. provides a Modbus-enabled standalone web server with scheduling, data logging, alarm monitoring with event notification, RTU to TCP gateway capability, and user programmability. The server is configured via a standard web browser and rule-based templates for alarms, event notifications, I/O point configuration and all other features. The embedded server can be fully customized by the user's HTML and JavaScript wrapper. Modbus TCP client and server, and Modbus RTU master, are included. |
Control Solutions, Inc. | AddMe III Modbus I/O | I/O Interface: AddMe III provides 32 I/O points in a single Modbus RTU slave device. Universal inputs are configurable as analog or discrete with integer or floating point data available. Data scaling with slope/intercept is supported, and several thermistor linearization tables are built in. This device is optimized for building automation and facility management with thermistor support for temperature input. Relay outputs include HOA switches and status indicators. AddMe Lite is programmable using a structured control language. |
Control Solutions, Inc. | AddMe Lite Modbus I/O | I/O Interface: AddMe Lite provides 14 I/O points in a single Modbus RTU slave device. Universal inputs are configurable as analog or discrete with integer or floating point data available. Data scaling with slope/intercept is supported, and several thermistor linearization tables are built in. This device is optimized for building automation and facility management with thermistor support for temperature input. AddMe Lite is programmable using a structured control language. |
Control Solutions, Inc. | Babel Buster SPX Pro V2 | Network Gateway: Babel Buster SPX Pro V2 is the most intelligent connection yet between Modbus and SNMP v1 or v2c. The SPX Pro V2 features an automatic table walker and flexible trap receiver that fully supports connecting Modbus to a UPS with an RFC 1628 MIB. Built-in Script Basic with SNMP enhancements provide even greater power and flexibility. The SPX Pro V2 includes Modbus RTU and TCP, master and slave. The SPX Pro V2 includes SNMP client and server, and can send or receive traps. SPX Pro V2 also provides character string support for Modbus displays. |
Control Solutions, Inc. | Babel Buster BB2-2010-NB | Network Gateway: Babel Buster BB2-2010-NB is a Modbus RTU RS-485 master/slave used to connect LonWorks devices to a Modbus RTU network without binding or LonWorks network management outside of the gateway's own capabilities. A large number of data objects gives you flexibility in mapping Modbus registers to scalar or structured LonWorks network variables. Multiple registers may be mapped a single structured LonWorks network variable. Modbus holding registers, input registers, discrete inputs, and coils are supported. |
Control Solutions, Inc. | Babel Buster BB2-3010 | Network Gateway: Babel Buster BB2-3010 is a fully configurable universal Modbus RTU to BACnet MS/TP gateway. The BB2-3010 is a Modbus slave acting as a BACnet MS/TP client, allowing BACnet devices to be connected to a Modbus network. The Babel Buster BB2-3010 is also capable of being a Modbus RTU master used to make multiple Modbus RTU RS-485 devices accessible on a BACnet network. The BB2-3010 can also be MS/TP slave and Modbus slave at the same time for putting industrial PLCs on a BACnet network. |
Control Solutions, Inc. | Babel Buster BB2-3060 | Network Gateway: Babel Buster BB2-3060 is a fully configurable universal Modbus TCP to BACnet MS/TP gateway. The BB2-3060 is Modbus TCP server (slave) acting as a BACnet MS/TP client allowing BACnet MS/TP devices to be connected to a Modbus network. The Babel Buster BB2-3060 is also capable of being a Modbus TCP client (master) used to make multiple Modbus TCP devices accessible on a BACnet network. The BB2-3060 can also be MS/TP slave and Modbus slave at the same time for putting industrial PLCs on a BACnet network. |
Control Solutions, Inc. | Babel Buster BB2-6010 | Network Gateway: Babel Buster BB2-6010 is a Modbus to Modbus and a Modbus to SNMP Gateway. The BB2-6010 is more than a protocol translator. It is a self contained server that collects and distributes data according to the rules you create. The most common use of the BB2-6010 is to map Modbus RTU and/or Modbus TCP devices to SNMP. The SNMP manager can use SNMP Get to retrieve contents of any mapped Modbus register. The BB2-6010 generates SNMP Traps upon sensing of alarm conditions. |
Control Solutions, Inc. | Babel Buster BB2-7010 | Network Gateway: Babel Buster BB2-7010 BACnet IP to Modbus Gateway provides a BACnet IP client and server, Modbus TCP client and server, and Modbus RTU port configurable to be master or slave. The BB2-7010 BACnet IP client allows BACnet IP devices to be accessible from Modbus TCP or RTU. You configure the device instance, object type and instance, and poll interval for reading or writing BACnet objects. The object data is stored in the BB2-7010 server for subsequent retrieval as Modbus registers. When used to connect Modbus devices to a BACnet IP network, the BB2-7010 is configured via simple web page templates to read and write Modbus registers in one or more Modbus slaves, making that data accessible as BACnet objects on the BACnet IP network. |
Control Solutions, Inc. | Babel Buster Pro-V210 | Network Gateway: Babel Buster Pro V210 is the most intelligent connection yet between Modbus and SNMP v1 or v2c. The Pro V210 features an automatic table walker and flexible trap receiver that fully supports connecting Modbus to a UPS with an RFC 1628 MIB. Built-in Script Basic with SNMP enhancements provide even greater power and flexibility. The Pro V210 includes Modbus RTU and TCP, master and slave. The Pro V210 includes SNMP client and server, and can send or receive traps. The Pro V210 also provides character string support for Modbus displays. |
Control Solutions, Inc. | ValuPoint VP4-0610 | I/O Interface: ValuPoint® Model VP4-0610 low cost programmable I/O for Modbus RTU provides slave I/O, includes user programmable control, 2 analog/universal inputs, 2 discrete inputs, and 2 relay outputs. VP4-0610 can operate as Modbus master or slave, with all I/O accessible as holding registers and/or coils. The VP4-0610 includes live debug support for the i.CanDrawIt® graphical programming tool. |
Control Solutions, Inc. | ValuPoint VP4-2310 | I/O Interface: ValuPoint® Model VP4-2310 programmable I/O for Modbus RTU provides slave I/O, includes user programmable control, 14 analog/universal inputs, 3 analog outputs, and 6 relay outputs. VP4-2310 can operate as Modbus master or slave, with all I/O accessible as holding registers and/or coils. The VP4-2310 includes live debug support for the i.CanDrawIt® graphical programming tool. |
Dataforth Corporation | isoLynx SLX200 Data Acquisition System | I/O Interface: SLX200 is a fast, intelligent, modular, fully isolated data acquisition system that provides superior reliability, accuracy, and isolation for a wide range of rugged high performance industrial applications. With its ability to interface with more than 650 SCM5B analog I/O modules, the isoLynx SLX200 offers maximum flexibility for factory automation, process control, test and measurement, machine control, and data acquisition applications. |
Doosan Heavy Industries & Construction | GUARDIAN SIF-ES14 | Controller: SIF-ES14 supports industrial communication protocol which is Modbus TCP/Serial (Slave Mode), and uses the VME BUS Platform. It has several interfaces which are an Ethernet, RS-485 and RS-422. The Ethernet interface has four ports and each ports can be set 10/100/1000 Mbps. The Serial interface has eight RS-485 Half-Duplex ports and two RS-422 Multi-Drop ports. However, only one channel can be used to select Ethernet and Serial. The applications are stored into the NAND Flash Memory using VxWorks TFFS, and are loaded into DRAM to run Modbus TCP/Serial program. |
HMS Industrial Networks AB | Anybus CompactCom M40 Ethernet Modbus-TCP, AB6603-B | I/O Module: The Anybus CompactCom M40 for Modbus TCP is a complete communication module which enables your products to communicate on a Modbus TCP network. By implementing the CompactCom concept into your product line, you will have instant access to any other industrial network by simply plugging in another Anybus module. |
Lenze Americas | i550 | AC/DC Drive Control: The i550 is a high-quality inverter that already conforms to future standards in accordance with the EN 50598-2 efficiency classes (IE). Overall, this provides a reliable and future-proof drive for a wide range of machine applications. Its distinguishing features: a streamlined design, scalable functionality, and exceptional user-friendliness. |
Molex, LLC | Direct-Link MODBUS/TCP to Serial, DRL-EMB-SRM | Network Gateway: Direct-Link MODBUS/TCP gateway allows you to connect any Modbus serial equipment to a Modbus TCP network. It works as Client or Server on the Modbus TCP side, and as a Modbus master or slave, on the other side. It is also possible to integrate other protocols on the serial link. Direct-Link Modbus/TCP is configured using its own embedded web server. It also provides 1 digital input and 1 digital output drivable through Modbus. |
Schneider Electric SA | Altivar Speed Drives, ATV 58 ... | AC/DC Drive Control: The Altivar 58 is a frequency inverter for three-phase squirrel cage asynchronous motors that incorporates the latest technological developments and functions suitable for the most common applications, including horizontal and vertical materials handling, packing/packaging, special machines, ventilation/air conditioning, pumps and compressors. Its numerous integrated options enable it to be adapted to sophisticated and advanced control systems. For applications in which only a small amount of overtorque is required, drives with power ratings of >?n11 kW at 208?K240 V and >?n18.5 kW at 380?K500 V can be oversized. |
Schneider Electric SA | Advantys OTB Network Interface Module, OTB 1E0 DM9LP | I/O Interface: The Advantys OTB distributed I/O solution consists of a compact system (network interface and integrated I/O) with the addition of Twido I/O expansion modules. Each island has, on a DIN rail a network interface module (including Ethernet TCP/IP) with 12 24 V inputs, 6 relay outputs and 2 solid state outputs 24 V 0.3 A. As an extension, up to 7 discrete or analog I/O expansion modules can be added. This structure, created using IP 20 modules, can be used to manage 20 to 244 I/O per island over a maximum length of 328.7 mm (height 94.5 mm). |
Schneider Electric SA | Advantys STB Network Interface Module | I/O Interface: Advantys STB Network Interface Module The STB NIP 2212 network interface module, located at the beginning of each island, are gateways for exchanging data between the TCP/IP network and the Advantys STB automation island. It also enable the configuration of parameters and addressing of installation devices. These settings are stored in the module?s internal RAM or Flash memory. Optionally, they can be saved to the STB XMP 4440 removable memory card (32 Kb). |
Schneider Electric SA | Twido Programmable Controller Module | Network Gateway: TwidoPort module 499 TWD 01100 is an Ethernet interface that is easy to use and dedicated to a compact or modular Twido programmable controller version ?? 3.0. It allows incorporation of the Twido controller into an Ethernet network as a passive device (slave). With version 3.0 of TwidoSoft software and of the Twido operating system, the TwidoPort module is ready for use. When connected to the RS 485 port of the Twido programmable controller, the TwidoPort module acts as a gateway between the Ethernet network and the Modbus network. |
Schneider Electric SA | Micro Communications Modules, TSX ETZ 510 | Network Gateway: TSX ETZ 510 is used to connect Micro platforms to the Ethernet TCP/IP (10/100 Mbps on RJ 45) network via an external autonomous module. This module is also used to link to an external modem. This module includes a Factory Cast configurable Web server. |
Schneider Electric SA | Micro Communications Modules, TSX ETZ 410 | Network Gateway: Micro Communications Modules, TSX ETZ 410 TSX ETZ 410 is used to connect Micro platforms to the Ethernet TCP/IP (10/100 Mbps on RJ 45) network via an external autonomous module. This module is also used to link to an external modem. |
Schneider Electric SA | Quantum Communications Modules, 140 NOE 771 1X | Network Host Adapter: The Quantum NOE Ethernet Communications modules offers a lot of function as basic web server with diagnostic and adjust capability, Factory Cast Web Server, Modbus TCP communication, I/O scanner, Global Data group comunication, FDR Server, NTP server, SNMP service and e-mail service. |
Schneider Electric SA | Quantum Communications Modules, 140 NOE 771 0 | Network Host Adapter: The Quantum NOE Ethernet Communications modules offers a lot of function as basic web server with diagnostic and adjust capability, Modbus TCP communication, I/O scanner, Global Data group comunication, FDR Server, NTP server, SNMP service and e-mail service. |
Schneider Electric SA | Premium Communications Modules, TSX ETY 510 | Network Host Adapter: Ethernet TCP/IP communication Premium modules with Transparent Ready services: - HTTP communication, data viewing and diagnostic via FactoryCast User Web Server. - Exchanges in compliance with the OPC (OLE for Process Control) standard via an OFS data server. - TCP/IP Modbus message handling. - OPEN TCP. |
Schneider Electric SA | Premium Communications Modules, TSX ETY 410 | Network Host Adapter: Ethernet TCP/IP communication Premium modules with Transparent Ready services: - HTTP communication, data viewing and diagnostic via Basic Web Server. - Exchanges in compliance with the OPC (OLE for Process Control) standard via an OFS data server. - TCP/IP Modbus message handling. |
Schneider Electric SA | Carriere Digital 600 Retrofit Trip Relay | Misc. Hardware: Microprocessor-based protective trip unit used to operate low-voltage circuit breakers under overload conditions. |
Schneider Electric SA | Premium family CPU module, P571634 | Controller: Premium family CPU module used with the Unity software environment. The Premium family of Programmable Logic Controllers are optimized for complex machine applications. |
Schneider Electric SA | Premium family CPU module, P573634 | Controller: Premium family CPU module used with the Unity software environment. The Premium family of Programmable Logic Controllers are optimized for complex machine applications. |
Schneider Electric SA | Premium family CPU module, P574634 | Controller: Premium family CPU module used with the Unity software environment. The Premium family of Programmable Logic Controllers are optimized for complex machine applications. |
Schneider Electric SA | Premium family CPU module, P575634 | Controller: Premium family CPU module used with the Unity software environment. The Premium family of Programmable Logic Controllers are optimized for complex machine applications. |
Schneider Electric SA | Quantum family CPU module, CPU65160 | Controller: Quantum family CPU module used with the Unity software environment. The Quantum family of Programmable Logic Controllers are optimized for process control and high availability needs. |
Sierra Monitor Corporation | FieldServer Gateway FS-B30 Series | Network Gateway: This protocol translator/gateway has up to 4 serial ports (RS-232 and RS-485), two Ethernet ports (so no need for a hub to download changes in configuration). It is used to interface a variety of serial, Ethernet and fieldbus devices (such as LonWorks, ControlNet, etc) to Modbus TCP networks. FieldServer has the largest driver library in the industry to make it easy to achieve the interoperability demanded by today?s integrators and end-users. |
Acromag | BusWorks 900EN and EtherStacks ES2000 Ethernet I/O Modules | I/O Module: A variety of analog and discrete input/output modules for monitoring sensors and controlling devices. Each remote I/O module provides a 10/100 Modbus TCP/IP interface and 4 to 96 channels. |
Acromag | ES2161/ES2162, 32-Channel Differential Current or Voltage Analog Input | I/O Interface: EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface a large quantity of analog input signals. Units natively accept 32 differential high-level analog voltage or current inputs - ideal for most sensor interface applications in remote zones. For systems requiring high channel-to-channel isolation or a variety of input signals (voltage, current, temperature, frequency, load cell, etc.), the ES2162 has two ports that will each interface 16 inputs from an 8B signal conditioner backpanel. |
Acromag | EtherStax Ethernet I/O blocks, ES2151, ES2152 | I/O Module: Rugged, high-density Ethernet I/O blocks for distributed I/O and SCADA applications |
Acromag | 967EN & 968 EN I/O Modules | I/O Module: BusWorks Ethernet I/O series models 967EN and 968EN provide 8-channel interfaces for differential analog voltage or current input signals. Each model is available in industrial and commercial-grade versions. |
Acromag | Ethernet Analog Output Modules, ES2171 | I/O Module: EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface analog output signals. |
Acromag | 958EN 16-channel single-ended voltage input | I/O Module: These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation. The DB25 port provides a parallel connection to a rack of 8B analog input modules. The 8B modules provide an isolated front-end with signal conditioning of up to 16 sensor signals. Industrial-grade models add a configurable integrator/totalizer plus superior accuracy and temperature performance compared to the economical commercial-grade version. |
Danfoss Drives A/S | HVAC VLT 2800 series Drives for Heating, Ventilation, and Air Conditioning | AC/DC Drive Control: Built-in serial communication for Modbus RTU, Johnson Controls Metasys N2, and Siemens Apogee FLN, with LonWorks and BTL-certified BACnet available as option cards. Available through 1350 horsepower, the VLT HVAC Variable Frequency Drive is easy to install and operate and is compatible with virtually all building automation systems, and can be remotely commissioned and monitored. |
Dold (E. Dold & Söhne KG) | Smart Motorstarter, UG9410 | AC/DC Drive Control: The smart motorstarter UG 9410 can be used for softstart, softstop, reversing and protecting 3 phase asynchronous motors. By measuring the line current a thermal model is used to calculate the motor temperature, and in the case of overtemperature the motor is disconnected. In addition also a thermo switch can be used. The reversing is done via relays. The relays are switched without current flow, this provides long service life. |
Dold (E. Dold & Söhne KG) | Smart Motorstarter, UG9411 | AC/DC Drive Control: The smart motorstarter UG 9411 can be used for softstart, softstop, reversing and protecting 1 phase asynchronous motors. By measuring the line current a thermal model is used to calculate the motor temperature, and in the case of overtemperature the motor is disconnected. In addition also a thermo switch can be used. The reversing is done via relays. The relays are switched without current flow, this provides long service life. |
Dold (E. Dold & Söhne KG) | Digital Input/Output Module, UG 9460 | I/O Module: The I/O module UG 9460 has 8 digital 24 V inputs and 4 relay outputs. Via Modbus the inputs can be read and the outputs can be set individually. |
Dold (E. Dold & Söhne KG) | Analog Input/Output Module, UG 9461 | I/O Module: The universal Input/Output module UG 9461 has analog inputs and 2 analog outputs. It can be used to connect thermocouples and thermistors and offers 2 configurable measuring inputs 0-10V or 0-20mA. Via Modbus the input status can be read and the output status can be set. For the analog outputs a DC 01 ... 10 V interface is available. |
Hach Company | 1720E Low Range Process Turbidimeter | Sensor: Continuously-flowing sample enters the turbidimeter and flows through a patented bubble removal system, which vents entrained air from the sample stream. |
Lenze Americas | SMVector Standard Duty Drive | AC/DC Drive Control: SMV inverter drives offer sophisticated auto-tuning, fast dynamic torque response with impressive low-speed operation all from a compact and simple to use package. The SMV range is designed for motor applications where dynamic speed and torque control is demanded, making the units ideal for conveyors, food production lines, packaging quipment plus fan and pump systems. |
Lenze Americas | SMVector NEMA4X Washdown Duty Inverter | AC/DC Drive Control: SMV inverter drives offer sophisticated auto-tuning, fast dynamic torque response with impressive low-speed operation all from a compact and simple to use package. The SMV range is designed for motor applications where dynamic speed and torque control is demanded, making the units ideal for conveyors, food production lines, packaging quipment plus fan and pump systems. |
Real Time Automation | Modbus TCP Source Code, 495MTC or 495MTS | Software - Programming: Quickly and easily add Modbus TCP communications to your products with the Real Time Automation Modbus TCP Client/Server and development kits. Developed specifically for industrial platforms and fully integrated with any number of RTOS systems and TCP/IP stacks, you can have Modbus TCP communications in days not weeks, months or years. The development kit includes everything you need to implement your Modbus TCP networking solution; 'no royalty,' single task source code, sample objects, PC Tools, a ready-to-run sample application, complete documentation and much more. |
Sierra Monitor Corporation | EZ Gateway Modbus to BACnet, FS-EZX-MOD-BAC | Network Gateway: Building automation protocol gateway used to translate Modbus devices to BACnet networks. Connect with virtually any Modbus device out of the box with full Modbus interoperability. Lower commissioning time and management costs with EZ Profiles and DeviceProxy. |
TIS Control Limited | TIS IP Gateway and Modbus Port, IP-Com-Port | : Designed for big projects, TIS's IP-Com-Port unifies and incorporates all your smart components to make them easier to manage. TIS-BUS wiring topology covers up to 64 devices per cable connected by Modbus RTU. In projects with numerous elements, an IP port can be added to each network so that all become integrated. Using IP modules and Ethernet cables, controlling or monitoring lights, relay switches, climate and air quality (air conditioning), infrared, energy metering, weather station, curtains and shutters, digital inputs, analog inputs, motion sensors, water-leakage sensors, and security systems in a building the size of a skyscraper becomes simple and convenient. |
United Electronic Industries, Inc. | UEIModbus I/O | I/O Module: When configuring a UEI Cube or RACK chassis, you may choose from a wide variety of analog input boards, analog output boards, digital I/O boards, and boards supporting a complete set of counter/timer functions including: event counting, frequency measurement, pulse-width measurement, frequency generation, pulse and PWM generation. All boards come factory pre-installed and calibrated. |
Moxa | MGate 5103 Series | Network Gateway: The MGate 5103 is a rugged industrial Ethernet gateway to integrate Modbus devices onto a PROFINET network. The MGate 5103 is considered as a Modbus master/slave or EtherNet/IP Adapter to exchange data with PROFINET IO Controller. The MGate 5103 provides the ease-of-use wizard to guide user to configure in few steps, and offers various maintenance functions such as Modbus traffic monitoring and protocol diagnostics to help with quick troubleshooting. Status Monitoring eliminates connection failure difficulties for PLC/SCADA by providing an extra mechanism to indicate status of Modbus command. The MGate 5103 also supports redundant dual DC power inputs and a relay output for operation reliability. |
ACKSYS Communications & Systems | COMETH | Network Gateway: COMETH enables integration of Modbus serial (ASCII & RTU) equipment (RS232) and equipment using Modbus TCP protocol within the same network. COMETH is a very small product (Dongle casing). This product is installed as a bridge between the Ethernet network and existing Modbus equipment, dramatically simplifying the extension of a standard application to Modbus TCP over the Ethernet network. |
ACKSYS Communications & Systems | COMETH-FIELD-RD | Network Gateway: COMETH-FIELD-RD (DIN-rail mounting model) enables integration of Modbus serial (ASCII & RTU) equipment (RS232, RS422 or RS485) and equipment using Modbus TCP protocol within the same network. COMETH-FIELD-RD is installed as a bridge between the Ethernet network and existing Modbus equipment, dramatically simplifying the extension of a standard application to Modbus TCP over the Ethernet network. |
Acromag | 901MB-0900 Discrete Input Module | I/O Module: 12-Channel Discrete Input Module with Active Low Inputs |
Acromag | 902MB-0900 Discrete Output Module | I/O Module: Twelve discrete input and/or output channels. Isolation separates the I/O, power, and network circuits. |
Acromag | 942MB Frequency/Pulse Counter Module | I/O Module: 2 input channels - periodic/pulse waveform signals |
Acromag | 918MB Analog Output Module | I/O Module: 4 analog output channels - DC voltage |
Acromag | 917MB Analog Output Module | I/O Module: 4 analog output channels - DC current |
Acromag | 934MB Analog Input Module | I/O Module: 4 temperature input channels - RTD |
Acromag | 932MB Analog Input Module | I/O Module: 2 temperature input channels - RTD |
Acromag | 924MB Analog Input Module | I/O Module: 4 temperature input channels - thermocouple/millivolt |
Acromag | 914MB Analog Input Module | I/O Module: 4 analog input channels - DC voltage |
Acromag | 913MB Analog Input Module | I/O Module: 4 analog input channels - DC current |
Acromag | 906MB Discrete I/O Module | I/O Module: 12 discrete I/O channels (any mix) - active high inputs, sourcing outputs |
Acromag | 905MB Discrete Output Module | I/O Module: 12 discrete output channels - sourcing or high-side switching |
Acromag | 904MB Discrete Input Module | I/O Module: 12 discrete input channels - active high |
Acromag | 903MB-0900 Discrete I/O Modules | I/O Module: 12 Channel Discrete I/O (any mix) - Active Low Inputs, Sinking Outputs |
Acromag | ES2113 EtherStax Ethernet I/O Block | I/O Interface: EtherStax I/O blocks provide a ruggedized, high-density solution to interface a large quantity of discrete I/O signals to your control system. A stackable aluminum housing maintains a small footprint and stands up to harsh, industrial environments. Web-based configuration simplifies setup with any web browser. |
Acromag | ES2153 EtherStax Ethernet I/O Block | I/O Interface: EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface a large quantity of analog input signals. Units accept 16 single-ended analog voltage inputs and 16 single-ended current inputs. A DB25 port supports an alternate interface of voltage inputs from 8B signal conditioning modules. This combination of high-density analog current and voltage inputs is ideal for many sensor interface applications in remote zones. |
Acromag | ES2163 EtherStax Ethernet I/O Block | I/O Interface: EtherStax I/O modules provide a rugged, high-density, and high-speed solution to inter-face a large quantity of analog input signals to SCADA and distributed I/O systems. Each unit converts up to 64 single-ended analog current signals from various sensors and instruments for transmission to an Ethernet-based control network. Typical applications include process control, automated manufacturing, remote data acquisition, test and measurement, embedded computing, and supervisory monitoring systems |
Acromag | ES2164 EtherStax Ethernet I/O Block | I/O Interface: EtherStax I/O modules provide a rugged, high-density, and high-speed solution to interface a large quantity of analog input signals to SCADA and distributed I/O systems. Each unit converts up to 64 single-ended analog voltage signals from various sensors and instruments for transmission to an Ethernet-based control network. Typical applications include process control, automated manufacturing, remote data acquisition, test and measurement, embedded computing, and supervisory monitoring systems |
Acromag | ES2171 EtherStax Ethernet I/O Block | I/O Interface: EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface analog output signals. Each unit provides 16 high-level analog current outputs to control various industrial devices. |
Acromag | ES2172 EtherStax Ethernet I/O Block | I/O Interface: EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface analog output signals. Each unit provides 16 high-level analog voltage out-puts to control various industrial devices. |
Acromag | BusWorks 951EN & 952EN | I/O Module: These modules provide an isolated Ethernet network interface for analog and discrete I/O signals. Multi-range analog inputs and outputs support a wide variety of industrial devices. High-resolution, low noise, A/D and D/A converters deliver high accuracy and reliability. 3-way isolation improves system performance. Discrete I/O provides monitoring and control of on/off, high/low, or open/close industrial devices. Tandem I/O provides output level control and status verification in one unit. |
Acromag | BusWorks 961EN & 962EN | I/O Module: These modules provide an isolated Ethernet network interface for six analog input channels. Differential inputs eliminate ground loops and thus the need for isolators in many applications. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability. |
Acromag | BusWorks 965EN | I/O Module: These modules provide an isolated Ethernet network interface for up to six input channels. Differential inputs eliminate ground noise and each terminal block includes a cold junction compensation (CJC) sensor for more precise temperature measurements. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability. |
Acromag | BusWorks 963EN & 964EN | I/O Module: These modules provide an isolated Ethernet network interface for twelve analog input channels. Compact design saves space and lowers system costs. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability. |
Acromag | BusWorks 966EN | I/O Module: These modules provide an isolated Ethernet network interface for up to six input channels. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability. 3-way isolation further improves the system performance. |
Acromag | BusWorks 972EN & 973EN | I/O Module: These modules provide up to six channels of analog output. Multi-range outputs support a wide variety of industrial devices. They can drive displays and recorders, control drives, or send analog signals to other systems. High-resolution, low noise, D/A converters deliver high accuracy and reliability. 3-way isolation further improves system performance. |
Acromag | BusWorks 981EN & 982EN & 983EN | I/O Module: These modules provide an isolated Ethernet network interface for twelve discrete input and/or output channels. The outputs provide direct on/off, high/low, or open/close control of industrial devices. The inputs sense the status of motors, pumps, valves and other equipment. The 983EN model with tandem I/O provides output level control and status verification in one unit. |
Acromag | BusWorks 989EN | I/O Module: These modules provide an isolated Ethernet interface for any input/output mix of up to 16 discrete signals. Inputs sense the status of dry contacts, switches, power supplies, and DC logic. Industrial-grade units have eight 32-bit counters with timers, alarms, and non-volatile memory for metering, totalizing, and low-frequency periodic measurement. The outputs control solid-state switching of lamps, horns, and other devices. |
Acromag | BusWorks 993EN | I/O Module: These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation. |
Acromag | BusWorks 994EN | I/O Module: These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation. |
Acromag | BusWorks XT I/O Modules | I/O Module: Each module processes I/O signals on up to sixteen channels and features dual Ethernet ports, as well as pluggable front-facing terminals, for more convenient wiring. This allows daisy-chaining of modules for simpler installation and minimized switch requirements for reduced cost. |
Advanced Micro Controls Inc | AnyNET I/O ANE2 2-Channel SSI Interface | I/O Interface: AMCI's ANE2 connects a wide variety of SSI sensors to your PLC using a standard network connection, and it programs using the host controller's (PLC) native software. |
Advanced Micro Controls Inc | Modbus TCP Stepper Indexer/Driver, SD31045E & SD17060E | AC/DC Drive Control: The powerful (4.5 & 6.0 Amp RMS) AC line powered stepper motor controller/drivers eliminate the need for a plug-in card, and are easily configured through the host PLC software. AMCI?s E-drives offer system builders a choice of open or closed loop control modes, and come standard with a variety of features. |
Advanced Micro Controls Inc | SD17060E Stepper Motor Indexer/Driver | AC/DC Drive Control: This 115V AC powered 6.0 Amp integrated stepper indexer/driver eliminates the need for a separate stepper controller in the PLC. Adding stepper axes is very easy; as users simply attach another SD17060E to their Modbus-TCP network. |
Advanced Micro Controls Inc | SD31045E Stepper Motor Indexer/Driver | AC/DC Drive Control: This 230V AC powered 4.5 Amp integrated stepper indexer/driver eliminates the need for a separate stepper controller in the PLC. Adding stepper axes is very easy; as users simply attach another SD31045E to their Modbus TCP network. |
Advanced Micro Controls Inc | NR25 Absolute Rotary Encoder | Sensor: These heavy-duty rotary encoders supply absolute position and velocity data without glass discs or sensitive LED components, enabling them to withstand high levels of shock and vibration. The encoders can be connected to a PC, network, or PLC that supports Modbus TCP and are available in absolute single-turn and multi-turn packages with an IP67 rated 2.5' housing. |
Advanced Micro Controls Inc | ANG1(E) Stepper Motor Indexer/Driver | AC/DC Drive Control: AMCI's ANG1(E) integrates a DC powered, 4.0 amp microstepping drive and motion controller, simplifying installation and cutting costs. Move commands are easily programmed through the host PLC/PAC software, and cabling is drastically reduced by expanding up to 6 axis of motion over a single network connection. |
Advanced Micro Controls Inc | Nexus Distributed I/O: High Speed PLS Controller | I/O Module: High-speed Programmable Limit Switch (PLS) controllers that use an incremental encoder or resolver for position feedback, and provide up to 16 I/O points. Compatible with a wide variety of PLCs that support Modbus TCP and many other industrial networks, these units control the outputs independently from the PLC scan, enabling them to achieve a high-speed update time of 100µs. The NEXUS plugs into the network (not the PLC/PAC) allowing for installation in a remote location convenient to the application, greatly reducing cabling time and costs. |
Advanced Micro Controls Inc | Nexus Distributed I/O Multi-Axis Stepper Motor Controller | Controller: Multi-axis stepper motor controllers that can simultaneously control the position and velocity of up to four stepper motors. Its built-in network interface makes it simple to connect to a wide variety of PLCs that support Modbus TCP and many other industrial networks. The NEXUS plugs into the network (not the PLC/PAC) allowing for installation in a remote location convenient to the application, greatly reducing cabling time and costs. Encoder feedback for move verification is also available. |
Applied Motion Products | Modbus Step Drive + Motor, SWM24QF-3AE | : SWM integrated steppers are IP65-rated drive+motor units, fusing step motor and drive components into a single splashproof and dustproof device. The space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions. SWM24 steppers combine high torque NEMA 24 step motors with a sophisticated, 6.0 A/phase (peak-of-sine) step motor drive. |
Applied Motion Products | Modbus Step Drive+Motor, STM24QF-3RE | AC/DC Drive Control: STM24 integrated steppers fuse step motor and drive components into a single device, saving space and cost while eliminating wiring over conventional motor and drive solutions. The STM24 integrated steppers provide up to 340 oz-in torque. Modbus RTU communication over RS-285 is included at bit rates from 9600 to 115,200. Five I/O points and encoder feedback are built-in. |
Applied Motion Products | ST Series Stepper Drives, STx-Qxx | AC/DC Drive Control: The ST stepper drives are a family of compact digital stepper drives with multiple control options and many sophisticated features. The ST drives represent the latest generation of stepper drive technology from Applied Motion. Step motors run smoother than ever with features such as anti-resonance, torque ripple smoothing, and microstep emulation. Step motors also run faster and with more torque due to the alleviation of mid-band resonance issues. |
Applied Motion Products | STM Integrated Steppers, STMxxQ-xxx | AC/DC Drive Control: STM integrated steppers are drive+motor units, fusing step motor and drive components into a single integrated package. This space-saving design eliminates wiring and saves on cost over conventional motor and drive solutions. |
Applied Motion Products | TSM StepSERVO Integrated Motors, TSMxxQ-xxG | AC/DC Drive Control: StepSERVO integrated motors use closed loop feedback and advanced control technology to create up to 50% more torque while consuming less power than open loop step motors. The closed loop performance also improves overall system accuracy because the motor does not stall. If the torque demand is greater than the motor can produce the controller produces a position error to alert the machine controller or operator. This is a benefit over open loop systems where the motor can stall and the controller is unaware. |
Applied Motion Products | TXM StepSERVO Integrated Motors, TXMxxQ-xxG | AC/DC Drive Control: StepSERVO integrated motors use closed loop feedback and advanced control technology to create up to 50% more torque while consuming less power than open loop step motors. The closed loop performance also improves overall system accuracy because the motor does not stall. If the torque demand is greater than the motor can produce the controller produces a position error to alert the machine controller or operator. This is a benefit over open loop systems where the motor can stall and the controller is unaware. |
Automated Solutions, Inc. | Modbus/TCP OPC Server | Software - OPC: Automated Solutions' Modbus/TCP OPC Server delivers high-speed connectivity to Modbus TCP compatible devices via Ethernet. This server is designed for all local or remote OPC Clients such as HMI, SCADA, Operator Interface and Custom built (VB, VC++) applications. |
Automated Solutions, Inc. | Modbus OPC Server | Software - OPC: Automated Solutions' Modbus OPC Server is a high-speed OPC interface solution for connectivity to Modbus RTU/ASCII compatible devices via serial connection. This server is designed for all local or remote OPC Clients such as HMI, SCADA, Operator Interface and Custom built (VB, VC++) applications. |
Automated Solutions, Inc. | Modbus TCP ActiveX Control | Software - Device Driver: Automated Solutions' Modbus TCP ActiveX Control delivers high-performance connectivity to Modbus TCP compatible devices via Ethernet. Use Visual Studio.NET, Visual Basic, Visual C++, MS Office, and more to create runtime-free (see license agreement) HMI/SCADA applications. |
Automated Solutions, Inc. | Modbus RTU & ASCII ActiveX Control | Software - Device Driver: Automated Solutions' Modbus ActiveX Control delivers high-performance connectivity to Modbus RTU & ASCII compatible devices via serial connection. Use Visual Studio.NET, Visual Basic, Visual C++, MS Office, and more to create runtime-free (see license agreement) HMI/SCADA applications. |
Automated Solutions, Inc. | Modbus/TCP .NET Component | Software - Device Driver: ASComm.NET Modbus/TCP Client Driver provides high-performance connectivity to Modbus/TCP Server devices. Use VB.NET, C#.NET, C++.NET, and ASP.NET to create HMI/SCADA applications. Allows your .NET application to read/write registers on Modbus TCP Server devices. Powerful pre-built example applications with VB and C# source code included in development package. |
Automated Solutions, Inc. | Modbus RTU & ASCII .NET Component | Software - Device Driver: ASComm.NET Modbus RTU/ASCII Master Driver provides high-performance connectivity to Modbus RTU/ASCII Slave devices. Use VB.NET, C#.NET, C++.NET, and ASP.NET to create HMI/SCADA applications. Allows your .NET application to read/write registers on Modbus RTU/ASCII Slave devices. Powerful pre-built example applications with VB and C# source code included in development package. |
BELIMO Automation AG | Modbus Actuators | AC/DC Drive Control: Actuators for motorization of HVAC components. Various types available suitable for air dampers and valves. One sensor (active, passive, switch contact) can be connected per actuator. The factory settings cover the most common application. As desired, individual parameters can be adapted for specific system or servicing with a service tool. |
BELIMO Automation AG | Gateway MP to Modbus RTU, UK24MOD | Network Gateway: The Gateway UK24MOD connects up to 8 actuators via Belimo MP-Bus to Modbus RTU. The MP-Bus is an actuator-sensor bus dedicated to HVAC systems. |
Chipkin Automation Systems | CAS Data Client, 2500-01, 2500-02, 2500-03 | SCADA Hardware: CAS Data Client is a data logger and HTTP/XML Server which collects and logs data from Modbus and BACNet enabled devices. |
Chipkin Automation Systems | Modbus TCP Parser | Software - Other: The CAS Modbus TCP Parser is a smart utility that can analyze a series Modbus TCP messages, display any error message, and determine what data is being read and/or written as well as what device the messages are coming from. Modbus TCP Parser |
Chipkin Automation Systems | Modbus RTU to Modbus TCP Gateway, CAS2700-07 | Network Gateway: The Modbus RTU to Modbus TCP Gateway converts data between the protocols. It allows Modbus RTU devices to communicate with devices on a Modbus TCP network and vice versa. The Modbus TCP driver allows the Gateway to transfer data to and from devices over Ethernet TCP/IP using the Modbus protocol. The Modbus RTU driver allows the Gateway to transfer data to and from devices via a serial RS485 connection using the Modbus protocol. |
Chipkin Automation Systems | DF1 to Modbus RTU Multiport Gateway, FS-B3510-0820 | Network Gateway: A FieldServer protocol gateway that provides data exchange between DF1 and Modbus RTU. The Multiport Gateway provides a wealth of features to enable data transfer between different devices and networks. |
Chipkin Automation Systems | Modbus to BACnet EZ Gateway (500 Point), FS-EZ1-MOD-BAC | Network Gateway: The EZ Gateway Modbus and BACnet (FS-EZX-MOD-BAC) is an easy to use, high-performance building and industrial automation protocol gateway for integrators to interface Modbus certified products to BACnet management systems in commercial buildings, campuses, and industrial facilities. Modbus-certified products encompass a wide range of applications such as energy, gas, heating, water, VFD drives, and PLCs. The EZ Gateway Modbus to BACnet integrates such Modbus-based devices and systems to BACnet-based management systems over BACnet MS/TP or BACnet/IP protocols. |
Comtrol Corporation | DeviceMaster UP 1-Port Modbus | Network Gateway: Industrial Ethernet gateway that provides advanced Modbus communications between a wide variety of Modbus controllers to a wide variety of Modbus and Raw/ASCII devices. The DeviceMaster UP supports the Modbus/TCP, Modbus Router and Modbus Server applications. |
Comtrol Corporation | DeviceMaster RTS 16-Port RJ45 | Network Gateway: Ethernet device server that provides Ethernet to serial networking capabilities. Supports the Modbus Server application as well as standard applications such as NS-Link, which provides virtual Com ports, and SocketServer, which provides standard Ethernet to serial communications. |
Comtrol Corporation | DeviceMaster RTS 32-Port RJ45 | Network Gateway: Ethernet device server that provides Ethernet to serial networking capabilities. Supports the Modbus Server application as well as standard applications such as NS-Link, which provides virtual Com ports, and SocketServer, which provides standard Ethernet to serial communications. |
Comtrol Corporation | DeviceMaster UP 2-Port 1E Modbus | Network Gateway: Industrial Ethernet gateway that provides advanced Modbus communications between a wide variety of Modbus controllers to a wide variety of Modbus and Raw/ASCII devices. The DeviceMaster UP supports the Modbus/TCP, Modbus Router and Modbus Server applications. |
Comtrol Corporation | DeviceMaster UP 4-Port VDC Modbus | Network Gateway: Industrial Ethernet gateway that provides advanced Modbus communications between a wide variety of Modbus controllers to a wide variety of Modbus and Raw/ASCII devices. The DeviceMaster UP supports the Modbus/TCP, Modbus Router and Modbus Server applications. |
Comtrol Corporation | DeviceMaster RTS 8-Port DB9 | Network Gateway: Ethernet device server that provides Ethernet to serial networking capabilities. Supports the Modbus Server application as well as standard applications such as NS-Link, which provides virtual Com ports, and SocketServer, which provides standard Ethernet to serial communications. |
Comtrol Corporation | DeviceMaster UP 2-Port 2E Modbus | Network Gateway: Industrial Ethernet gateway that provides advanced Modbus communications between a wide variety of Modbus controllers to a wide variety of Modbus and Raw/ASCII devices. The DeviceMaster UP supports the Modbus/TCP, Modbus Router and Modbus Server applications. |
Comtrol Corporation | DeviceMaster UP 2-Port 1E DB9M Modbus | Network Gateway: Industrial Ethernet gateway that provides advanced Modbus communications between a wide variety of Modbus controllers to a wide variety of Modbus and Raw/ASCII devices. The DeviceMaster UP supports the Modbus/TCP, Modbus Router and Modbus Server applications. |
Comtrol Corporation | DeviceMaster UP 2-Port 2E DB9M Modbus | Network Gateway: Industrial Ethernet gateway that provides advanced Modbus communications between a wide variety of Modbus controllers to a wide variety of Modbus and Raw/ASCII devices. The DeviceMaster UP supports the Modbus/TCP, Modbus Router and Modbus Server applications. |
Comtrol Corporation | IO-Link Master, IOLM 4-EIP | Network Gateway: Comtrol's IO-Link gateways supports both Class 1 and Class 3 EtherNet/IP and Modbus TCP. The gateways are compatible with a vast array of PLCs, both new and old. |
Comtrol Corporation | IO-Link Master DR-8-EIP | Network Gateway: Comtrol's IO-Link Master combines the benefits of the IO-Link standard with the popular industrial Modbus TCP and EtherNet/IP™ protocol by providing a gateway that's a streamlined bridge between the field level sensor network and the industrial Modbus TCP and EtherNet/IP™ backbone, making retrofitting or expansion simple. The IO-Link Master easily installs on a standard DIN rail and incorporates two Fast Ethernet ports, eight IO-Link ports, two DI/DO ports and two DI ports. This product is designed with industrial grade components and redundant power inputs to make it exceptionally reliable for critical applications. The IO-Link Master is easily integrated into a system network, and is compatible with existing and new industrial Ethernet environments. |
Comtrol Corporation | IO-Link Master 8-EIP | Network Gateway: Comtrol's IO-Link Master combines the benefits of the IO-Link standard with the Modbus TCP and EtherNet/IP™ protocols. The IO-Link Master effectively shields the PLC programmers from the IO-Link complexities by handling those complexities itself. The result is simplified Modbus TCP and EtherNet/IP™ interfaces, which decreases system development time and installation efforts. The IO-Link Master features a rugged IP67 slim-line design incorporating two Fast Ethernet ports and eight IO-Link ports with M12 connectors. Designed for harsh environments, its machine-mount design uses industrial grade components. The IO-Link Master is easily integrated into a system network, and is compatible with existing and new industrial Ethernet installations. |
Comtrol Corporation | DeviceMaster UP 16 Modbus | Network Gateway: Comtrol's DeviceMaster UP 16-Port Modbus device server is meant to connect serial devices to a Modbus network. Built on a compact, low-profile housing, it packs both port density and advanced Modbus connectivity features designed to simplify even the most challenging installations. |
Continental Control Systems, LLC | WATTNODE MODBUS, WNC-3Y-XXX-MB, WNC-3D-XXX-MB | Monitoring Hardware: The WATTNODE® MODBUS is a kW hour/kWh energy meter that communicates on an EIA RS-485 network measuring 1, 2, or 3 phases or loads with voltages from 120 to 600 volts AC and 5 to 6000Amps in Delta (phase to phase) and Wye (phase to neutral) configurations. The Modbus interface networks AC power measurement, true RMS power and energy, energy and demand metering, kWh reactive power, VARs, power factor, line frequency providing both individual and combined phase measurements. |
Control Solutions, Inc. | BAS-700 Series Hardware with i.CanDoIt | I/O Interface: Formerly marketed as 'Modbus by the Module,' this product line has evolved into i.CanDoIt? The BAS-700 i.CanDoIt consists of a BAS-7050 Ethernet processor module plus one to eight I/O modules from the BAS-700 series. All configuration is done through the embedded web server. |
Control Solutions, Inc. | i.CanDoIt i.Board | I/O Interface: The i.CanDoIt i.Board provides a low-cost, Modbus-enabled standalone web server with alarm monitoring with event notification, and user programmability using Script Basic. The server is configured via a standard web browser and rule based templates for alarms, event notifications, I/O point configuration and all other features. The embedded server can be fully customized by the user's HTML and JavaScript wrapper. Modbus TCP client and server are included. |
Control Solutions, Inc. | Babel Buster® SPX-GW | Network Gateway: Babel Buster SPX-GW is a transparent gateway for mapping Modbus RTU devices to Modbus TCP and vice versa. All requests received from an RS-485 master are passed straight through to Ethernet servers. When configured to go the other way, all requests received from an Ethernet client are passed straight through to RS-485 slaves. |
Control Solutions, Inc. | Babel Buster BB2-6020-NB | Network Gateway: Babel Buster BB2-6020-NB is a Modbus TCP client/server used to connect LonWorks devices to a Modbus TCP network without binding or LonWorks network management outside of the gateway's own capabilities. A large number of data objects gives you flexibility in mapping Modbus registers to scalar or structured LonWorks network variables. Multiple registers may be mapped a single structured LonWorks network variable. Modbus holding registers, input registers, discrete inputs, and coils are supported. |
Control Solutions, Inc. | i.Report VP3-2290 | I/O Interface: Model VP3-2290 Global Remote Telemetry Unit is ideal for demanding remote alarm monitoring and data logging. It includes cellular GPRS 3G or CDMA radio built in. The VP3-2290 includes 12 hardwire sensor inputs which are universally configurable as analog, temperature (thermistor), or discrete/dry contact inputs. Two inputs have 30V range for battery monitoring. High-speed pulse counting is provided on 2 inputs. The VP3-2290 also includes 8 discrete inputs and 2 discrete outputs. The VP3-2290 includes a Modbus RTU port that can operate in master or slave mode. The VP3-2290 also includes a CAN/J1939 port for applications such as engine monitoring. |
Control Solutions, Inc. | ValuPoint VP4-2810 | I/O Interface: ValuPoint® Model VP4-2810 programmable I/O for Modbus RTU provides slave I/O, includes user programmable control, 12 discrete inputs, and 16 discrete outputs. VP4-2810 can operate as Modbus master or slave, with all I/O accessible as holding registers and/or coils. The VP4-2810 includes live debug support for the i.CanDrawIt® graphical programming tool. |
Control Techniques - Americas, LLC | Commander SE AC Vector Drive | AC/DC Drive Control: Commander SE is an AC open loop vector powerhouse, combining flexibility with a small footprint. Best of all, the Commander SE is simple to use and easy to install. |
Control Techniques - Americas, LLC | Commander SK | AC/DC Drive Control: Commander SK has been designed as a simple, compact, cost-effective AC motor speed controller that delivers performance with simplicity and ease of use. |
Control Techniques - Americas, LLC | Commander SX | AC/DC Drive Control: Commander SX is an AC motor speed controller designed for rugged applications. The Commander SX is a .5HP to 10HP Nema 4x (IP66) protected drive that enables users to mount the drive directly next to the motor. |
Control Techniques - Americas, LLC | Unidrive SP | AC/DC Drive Control: The Unidrive SP is a truly scalable 'Solutions Platform' that will operate in AC open loop and Closed Loop Vector, Servo, and Regen mode. The Unidrive SP's open architecture can be a gateway for multiple communications networks. It is available in wall-mount and free-standing configurations. |
Control Techniques - Americas, LLC | MDS Modular Servo Drive | AC/DC Drive Control: The Modular Drive System, MDS, is a powerful and cost-effective servo solution for applications with multiple axes. The MDS employs a backplane architecture that provides a common bus platform for one of three sizes of power modules and up to eight drive modules. |
Control Techniques - Americas, LLC | EN Servo Drive | AC/DC Drive Control: The EN servo drive is a medium power, stand-alone, fuly-digital servo system designed to reliably provide high performance and flexibility without giving up ease of use. |
Control Techniques - Americas, LLC | Epsilon Digital Servo Drive | AC/DC Drive Control: The Epsilon Series is a very compact digital servo drive. Desgned to fit in cabinets as small as six inches deep with cables attached. Epsilon drives possess the rugged quality and reliability found in larger drives. |
Control Techniques - Americas, LLC | Mentor II DC Drive | AC/DC Drive Control: The Mentor II is the premier DC drive. Simple stand-alone applications are easily configured to control motor speed, voltage or current using standard internal settings. Regen models also available. |
Control Techniques - Americas, LLC | Quantum III DC Drive | AC/DC Drive Control: The Quantum III delivers a DC drive package that integrates the intelligence of the Mentor II with a space saving saving design that incorporates many accessories typically required in the market. Regen models also available. |
Danfoss Drives A/S | VLT® Soft Starter MCD 500 | AC/DC Drive Control: VLT® Soft Starter MCD 500 is a total motor starting solution. Current transformers measure motor current and provide feedback for controlled motor ramp profiles. |
Dataforth Corporation | isoLynx® SLX300 Data Acquisition System | I/O Interface: Data acquisition system |
Domat Control System s.r.o. | M090 Modbus TCP/DALI converter | Network Gateway: M090 is a serial converter which acts as a Modbus TCP server (accepts Modbus TCP commands) and controls a DALI (Digital Addressable Light Interface) bus with up to 60 DALI devices. It also incorporates a web interface for manual entering of DALI commands inclusive bus configuration and diagnostic commands. |
Domat Control System s.r.o. | UC200 Room thermostat/temperature controller | Controller: UC200 is a communicative room heating and cooling controller with two binary inputs, two PWM outputs and a room sensor for control of a radiator or electrical heater and chilled ceiling. It is part of the UC... family with various I/O configurations. The controller is easy to operate with a turn/push button and features a legible 60 x 60 mm LCD display and a weekly time scheduler with RTC |
Domat Control System s.r.o. | UC150 Room thermostat/temperature controller | Controller: UC150 is a communicative room heating controller with one PWM output and a room sensor for control of a radiator or electrical heater. The controller is easy to operate with a turn/push button and features a legible 60 x 60 mm LCD display and a weekly time scheduler with RTC. |
Domat Control System s.r.o. | UI091 Room unit with CO2 sensor | Misc. Hardware: The room unit with CO2 sensor contains temperature sensor, NDIR CO2 sensor for carbon dioxide concentration measurement, optional humidity sensor, and control knob for setpoint control and other settings. The binary output is controlled either on a remote basis, or as thermostat, hygrostat or CO2 controller. |
Domat Control System s.r.o. | ECIO2 I/O Module with Modbus RTU/TCP Router | I/O Module: The ECIO2 multiple I/O compact module contains I/O mix optimized for HVAC and home control applications. The module uses Ethernet (Modbus TCP) for communication with PLC, and RS485 (Modbus RTU) bus as link to optional extension RS485 I/O modules, and can be easily integrated in a variety of supervision and control systems. |
Domat Control System s.r.o. | SoftPLC Runtime with OPC server | Software - OPC: The SoftPLC runtime provides tenths of drivers incl. Modbus RTU Client and Modbus TCP Client. The read variables may be further processed in a FUPLA logic incl. PI controllers and other analogue functions, and then written back to the Modbus servers, or communicated over an OPC server to a SCADA. It works also as a protocol converter and integrator. |
eWON | eWON2001 | Network Gateway: The eWON2000 is the ideal building brick to insert between the Internet and PLC-based automation systems. It allows to offer additional services and to save on system-commissioning costs. The eWON2000 features a TCP/IP router, embedded firewall, serial link connectivity, remote control, scripting, reporting tools, call-back function and alarm notification. For the original equipment manufacturer (OEM) or the system integrator, the eWON2000 does not only allow to save cost during the warranty period but it is also an opportunity for them to offer extra system features that add value and bring a significant competitive advantage. |
EXEMYS | Modbus Serial Server, SSE232IA-MB | Network Gateway: Industrial Ethernet-RS323/422/485 Converter with Digital I/O. SSE232IA-MB is a serial server designed for industrial applications where all equipment involved uses Modbus TCP, Modbus ASCII or Modbus RTU communications. SSE232IA-MB can connect PLCs, drives, temperature controllers, bar-code readers, vision system, and any other serial communication industrial equipment. |
EXEMYS | EGW1-MB | Network Gateway: Gateway used to connect any Modbus-enabled industrial equipment to an Ethernet network |
EXEMYS | SGW1-MB-HL, Modbus to Hostlink Converter | Network Gateway: SGW1-MB-HL converts an OMRON PLC (Hostlink Protocol) into a Modbus ASCII/RTU slave. |
Fieldbus International AS | Modbus to Foundation Fieldbus Gateway, T710 | Network Gateway: The T710 is DIN rail module for interfacing Modbus instruments to a Foundation Fieldbus network. |
Fieldbus International AS | Modbus to HART Gateway, T210 | Network Gateway: OEM board designed for integration into Modbus-based instruments to obtain the ability to communicate on HART |
Fieldbus International AS | Modbus to PROFIbus PA Gateway, T410 | Network Gateway: The T410 is a built-in module for interfacing Modbus transmitters to a PROFIbus PA network. |
Finesse Solutions | TruLogic Controller | Controller: The TruLogic? Controller is powered by a DeltaV Controller capable of controlling up to eight (8) bioreactors per controller. Each controller can be networked with additional TruLogic? Controllers to create a control network capable of managing several hundred bioreactors. Additionally, as an OPC Client/ Server the TruLogic? Controller is capable of interfacing with new or existing 3rd party devices such as controllers, analyzers and more. |
Flowserve Corporation | Valtek Logix 2000 Digital Positioner | Controller: The Flowserve Logix 2000 is a digital positioner with on-board PID control. Communications are either 4-20mA or Modbus. A PID controller mounted on the valve updates the valve stem position 16 times per second thus reducing control system lag. The Logix 2000 has error reporting capabilities and extensive valve diagnostics. The unit is completely configurable through the user interface screen, no external configuration device needed. |
GRUNDFOS Management A/S | CIM/CIU 200 | Network Gateway: The CIM/CIU 200 is a standard interface for data transmission between a Modbus RTU network and a Grundfos pump or controller. It makes data exchange possible between Grundfos pumping systems and a PLC or SCADA system. The interface module can be installed as an internal add-on or as a wall-mounted unit (for products where internal connections are not supported). |
Hach Company | sc1000 Multi-parameter Universal Controller | Controller: The Hach sc1000 Multi-parameter Universal Controller is a fully modular system consisting of a Display Module and one or more Probe Modules. The Display Module and Probe Module must be ordered separately. |
Hach Company | MOD I/O Modbus Interface, 115 Vac | I/O Interface: Modbus /O Interface |
Hach Company | sc200 Digital 2-channel Controller | Controller: The sc200 controller is compatible with 40+ sensors of digital and analogue Sensors, from Ammonium to Turbidity as well as special parameters such as Oil in Water. Its plug-and-play, mix and match lets it fit into any facílity or workflow. |
Hilscher GmbH | PC-Cards cifX | Network Gateway: PC cards are the fastest and easiest way to equip automation devices with a fieldbus or Real-Time Ethernet interface. They are equipped with accepted and standardized interfaces and will typically be used in industrial PCs and compact HMI terminals. In combination with a freely marketed SoftPLC, display or your own application they quickly solve any automation task. |
Hilscher GmbH | Modules comX: comX 100 and comX51 | Misc. Hardware: The comX communication module is a universal solution for upgrading devices with master or slave functionality. All modules are pin-compatible and have an identical software interface. There are designs with an integrated network connector and designs in which the network interface is tied to the base board. |
Hilscher GmbH | netANALYZER NANL-B500G-RE | Monitoring Hardware: The netANALYZER is a tool for the analysis of real-time Ethernet networks. It includes capture hardware for recording the telegrams on the network as well as a graphical user software for Windows with extensive analysis functions. The open driver API allows you to use the capture-hardware in your own custom applications. Integrated Ethernet Test Access Points (TAPs) ensure the absence of reaction on the Ethernet network during the measuring process. There is no relevant additional telegram delay; a TAP physically corresponds to an Ethernet cable of only a few millimeters additional length. The measuring accuracy of 10 ns meets the high requirements of time-synchronized protocols such as IEE1588, PROFINET IRT, EtherNet/IP with CIP Sync, EtherCAT or Sercos. The software allows easy control of the recording process. Important analysis functions, such as timing and network load analysis are integrated in the software. In addition, up to four digital switching signals of the same time resolution can be recorded in parallel to the Ethernet signals. This allows easy comparison of network traffic and the action or reaction of switching events. For a more detailed analysis of the recorded data, the software enables you to store files in the Wireshark.pcap format and to record data directly from Wireshark. |
Hilscher GmbH | netIC 50-RE | I/O Interface: The netIC is a complete 'Single Chip Module' in the compact dimensions of a Dual-In-Line (DIL) 32 pin plug-in module. It is based on the network controller netX and contains all components of a fieldbus or real-time Ethernet interface with an integrated 2-port switch and hub. With the netX technology the whole spectrum of relevant fieldbus and real-time Ethernet systems is covered. By exchanging the firmware, one single netIC can be used for multiple communication systems. User data is transferred with simple read-write commands to the application via the above mentioned serial interfaces. The well-known Modbus RTU protocol is used as a serial protocol. Conventional shifting registers can be controlled via a synchronous serial interface requiring no additional processor for a simple I/O-device. |
Hilscher GmbH | netJACK NJ 100EN-RE | Misc. Hardware: netJACK with its PCI Express interface addresses the embedded market with high-performance CPUs like Intel Atom®. There are also versions with a traditional dual-port memory and fast serial SPI interface. All types have the compact design of a closed IP 40 module that can be mounted without tools. Connector and mounting rails are designed as contact areas and cut-outs on the baseboard. netJACK can be mounted easily right before shipment - or even by the end customer. With netJACK, customers can realize the full range of communication solutions, e.g. for drives, HMI or ident systems. At the same time, additional functionalities as PLC, visualization or individual applications are possible. For customer-specific requirements, Hilscher offers a cost-optimized Design and Production Service. Due to the Hilscher network controller netX, a 10-year delivery guarantee is granted. |
Hilscher GmbH | netRAPID NRP 52-RE | Misc. Hardware: netRAPID is a quick and secure alternative to in-house development. This netX Chip-Carrier is a solution that offers reasonable costs per unit and reduced risk and fast time-to-market. netRAPID is a complete netX-based communication interface, containing all necessary operating components. The 32 x 32 mm compact netX carrier is soldered to the baseboard - by hand or SMD production process. You only need to add network interface, LEDs and address switches. A simple 2-layer baseboard is sufficient. Full functionality of netRAPID is enabled via licensed firmware that needs to be acquired once and loaded during manufacturing process. |
Hilscher GmbH | Gateways: netTAP 50 | Network Gateway: netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts one-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave-to-slave or slave-to-master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single fi eld device into any higher-level network. |
Hilscher GmbH | Gateways: netTAP 100 | Network Gateway: netTAP 100 is the protocol converter for sophisticated conversions and supports two-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet automation protocols. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed. A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit. |
Hilscher GmbH | Real-time Ethernet Kit | Misc. Hardware: This kit is suitable for development and test laboratories as well as for training purposes. It can be used to build a complete communication system for all real-time Ethernet systems. With the included netANALYZER, the performance and function of individual systems or system components that operate according to Ethernet II IEEE 802.3 specification or corresponding bus systems can be displayed. |
Hirschmann Automation and Control | Fiberoptic Repeaters, OZD 485 | Misc. Hardware: Interface converter electrical/optical for RS 485 field bus networks; repeater function; for quartz glass fiber optics; electrical full duplex or semi-duplex mode; long-haul version. |
Hirschmann Automation and Control | MACH 3001 | Misc. Hardware: Modular Gigabit switch with optional routing. The basic board is a fixed integrated-component, store and forward switching mode, Ethernet (10 Mbps), Fast Ethernet (100 Mbps), Gigabit Ethernet (1000 Mbps) switch. |
Hirschmann Automation and Control | MACH 3002 | Misc. Hardware: Modular Gigabit switch with optional routing; the basic board is fixed integrated component, store and forward switching mode, Ethernet (10 Mbps), Fast Ethernet (100 Mbps), Gigabit Ethernet (1000 Mbps) |
Hirschmann Automation and Control | MACH 3005 | Misc. Hardware: Modular Gigabit switch with optional routing; the basic board is a fixed integrated component, store and forward switching mode, Ethernet (10 Mbps), Fast Ethernet (100 Mbps), Gigabit Ethernet (1000 Mbps) |
Hirschmann Automation and Control | MACH 1000 Series | Misc. Hardware: Modular, managed, industrial switch for 19' cabinet; store-and-forward-switching; fanless design; Software Layer 2 Professional |
Hirschmann Automation and Control | MACH 4002 Series | Misc. Hardware: MACH 4000, modular, managed Industrial Backbone-Router, Layer 3 Switch with Software Professional. |
Hirschmann Automation and Control | SPIDER | Misc. Hardware: Entry Level Industrial Ethernet Rail Switch: For the economical installation of a company-wide Ethernet solution; Allows you to integrate widely dispersed components or serial terminal equipment into your Ethernet networks or to set up smaller, economical Ethernet networks without management functions. |
Hirschmann Automation and Control | OCTOPUS 16M | Misc. Hardware: Managed IP67 switch in accordance with IEEE 802.3; store and forward switching mode; Layer 2 Software Professional; Ethernet (10 Mbps) and Fast-Ethernet (100 Mbps) |
Hirschmann Automation and Control | EAGLE Family of Industrial Firewalls | Misc. Hardware: Industrial Firewall - Router, Single Client Transparent (SCT) and Multi Client Transparent (MCT), PPPoE, PPTP |
Hirschmann Automation and Control | MS 20 Managed Switch | Misc. Hardware: Modular Ethernet/Fast Ethernet-switch according to IEEE 802.3; compact, managed, industrial switch for DIN rail store-and-forward-switching; fanless design; Software Layer 2 Professional |
Hirschmann Automation and Control | MS 30 Giga Ethernet Managed Switches | Misc. Hardware: Gigabit Ethernet/Fast Ethernet-switch according to IEEE 802.3; Compact, managed, industrial switch for DIN rail store-and-forward-switching; fanless design; Software Layer 2 Professional |
Hirschmann Automation and Control | OZD MODBUS-PLUS | Misc. Hardware: Interface converter electrical/optical for Modbus Plus-field bus networks; repeater function; for quartz glass FO; long-haul version |
Hjelmslund Electronics | Isolated Modbus Adapter, USB485-MB45 | Network Host Adapter: The USB485-MB45 is an electrically isolated USB-to-RS485 converter, with automatic receive/transmit switching, 3-meter cable and RJ45 connector according to the Modbus specifications. Available for online shopping with same day shipping. |
HMS Industrial Networks AB | Anybus Communicator - Ethernet Modbus-TCP to Serial RS232/422/485 Gateway, AB7007 | Network Gateway: The Anybus Communicator Gateway is an external DIN-rail mounted gateway which provides Ethernet Modbus-TCP network connectivity via a serial RS232/RS422/RS485 interface. The Communicator contains an embedded Modbus-TCP and EtherNet/IP 10/100 Mb interface with IT functionality such as WEB-server, Flash file system, FTP-server, e-mail client, Telnet etc. The Communicator performs an intelligent conversion between the serial protocol and the chosen industrial network. The translation between the serial protocol and the network is configured by using the software 'ABC Config Tool'. |
HMS Industrial Networks AB | AnyBus Communicator Serial to Modbus Plus Gateway, AB7002 | Network Gateway: The AnyBus Communicator Gateway for Modbus Plus is an external DIN-rail mounted gateway which provides Modbus Plus network connectivity via a serial RS232/RS422/RS485 interface. The communicator contains a conformance tested AnyBus-S Modbus Plus interface and therfore has the same standard Modbus Plus services as the ABS slave module. It has serial protocol support for Modbus RTU Master Mode and Generic Data Mode which is fully configurable through the New ABC Config Tool V1.5 and the PC port on the AnyBus Communicator. Other protocols can be implemented by HMS on request. |
HMS Industrial Networks AB | Gateway LonWorks-Modbus RTU, AB7009 | Network Gateway: This is a gateway between LonWorks and Modbus RTU. The gateway is a SLAVE on the Modbus RTU side. This means that you connect this to a Modbus network which has a MASTER. The configuration of the module is simple and you can do it yourself with a configuration tool from us. |
HMS Industrial Networks AB | Netbiter® WS100 remote communication gateway | Remote Terminal Unit: The Netbiter WS100 contains on-board web pages to enable you to remotely monitor and control serial devices via Modbus RTU, Modbus TCP or ASCII protocol that are connected to an Ethernet LAN. The WS100 contains built-in features for alarm handling, data logging and configurable web pages for monitoring and controlling data from remote devices. |
HMS Industrial Networks AB | Netbiter® EasyConnect EC150 remote communication gateway | Remote Terminal Unit: Wherever your field equipment is located, just simply connect it to an EC150 gateway and you will start to receive data instantly from your field equipment via the cloud-based Netbiter Argos data center, provided free of change from HMS. The EC150's plug-and-play feature makes it possible to perform large scale installations quickly without being an IT/mobile network expert and makes it possible to monitor and control Modbus devices and networks remotely. |
HMS Industrial Networks AB | Anybus Communicator - Modbus-RTU to Serial RS232/422/485 Gateway, AB7014 (with RS-232 on RTU slave side); AB7010 (with RS-485 on RTU slave side) | Network Gateway: The Anybus Communicator Gateway is an external DIN-rail mounted gateway which provides Modbus-RTU slave connectivity on one side and a configurable serial RS232/RS422/RS485 on the lower side. The Communicator contains an embedded high-performance Modbus-RTU interface that performs an intelligent conversion between the serial protocol and the chosen industrial network. The translation between the serial protocol and the network is configured by using the software 'ABC Config Tool'. |
HMS Industrial Networks AB | Anybus® CompactCom M30 Modbus TCP plug-in module (AB6223 2-port version, AB6253 - M12 version) | I/O Interface: CompactCom M30 module is a ready-made interchangeable? communication solution for Modbus TCP and all other leading Fieldbus and Industrial Ethernet networks. Through a one-time fast in-design development, CompactCom M30 provides you with an exchangeable network interface without the need for any hardware or software changes to your device. |
HMS Industrial Networks AB | Anybus® CompactCom B30, AB6383, Modbus TCP Brick interface | I/O Interface: Anybus CompactCom B30 Brick is ideal for device manufacturers who are looking for a semi-integrated solution where connector flexibility, size, cost are key elements. The B30 Brick includes all network functionality and is ready to communicate, which results in substantial reduction of development efforts and a fast time-to-market. |
HMS Industrial Networks AB | Anybus CompactCom - Modbus-RTU Plug-in module, AB6203 | I/O Interface: Anybus CompactCom (Anybus-CC) modules are designed for integration into industrial devices that need to communicate with other automation equipment via Modbus-RTU or any other major network. Anybus-CC is the latest range of cost-optimized plug-in modules supporting all major Fieldbus and Ethernet networks. The Anybus-CC provides optimal flexibility for OEM device manufacturers. Anybus-CC provides the performance and functionality required to meet the communication demands of HMIs, Robot controllers, Drives, PLCs Valve blocks, Instruments, Weigh scales and many more industrial products. Anybus-CC uses the CompactFlash? connector. The modules are completely covered by a robust plastic housing that enables easy handling at any time in the logistic chain between manufacturer and end customer. |
HMS Industrial Networks AB | Anybus-IC Embedded Ethernet Modbus-TCP Hybrid Chip, AB6002 | I/O Interface: The Anybus-IC is a complete single-chip controller for industrial networks. It is optimized for low-/medium-range field devices, such as measuring devices, I/O blocks, valve manifolds, and temperature controllers where small size and multiple network connectivity is important. Anybus-IC is built on hybrid technology and contains all the analog and all digital components necessary to implement a network interface. A powerful 16/32 bit microcontroller with Flash and RAM memory, a network protocol chip and all necessary analog components including optocouplers, a DC/DC converter and bus drivers are integrated in a single housing of only 9 cm? in size. |
HMS Industrial Networks AB | Anybus X - Modbus-TCP to CANopen Gateway, AB7640 | Network Gateway: Anybus X-gateways are designed for use in Industrial Automation plants where increasingly many different Fieldbus and Ethernet networks are used. The X-gateways help System Integrators to easily interconnect Modbus TCP/IP, Modbus Plus, or Modbus RTU to virtually any other network, enabling consistent information flow throughout the entire plant. The Ethernet interface consists of an embedded Modbus TCP 10/100 Mbps interface with IT functionality such as Web-server, SSI-scripts, Flash file system, FTP-server, e-mail client, and Telnet. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. It is built on a dedicated 32-bit RISC micro processor (+60 mips) ensuring fast and secure Ethernet performance. The CANopen interface is an adapter class product allowing fast data exchange. The CANopen slave's data map consists of Process Data Objects (fast data) and Service Data Objects (slow data). The data on the CANopen bus is updated when a change is made or on request from another node. The CANopen interface module is certified by the Can In Automation organization and has proven conformance and interoperability with leading PLCs, SoftPLCs, HMIs and other devices. |
HMS Industrial Networks AB | Anybus X - Modbus TCP/IP to CC-Link Gateway, AB7643 | Network Gateway: The Anybus X-gateways are designed for use in Industrial Automation plants where increasingly many different Fieldbus and Ethernet networks are used. The X-gateways help System Integrators to easily interconnect Modbus TCP/IP, Modbus Plus, or Modbus-RTU to virtually any other network, enabling consistent information flow throughout the entire plant. The Ethernet interface consists of an embedded Modbus-TCP 10/100 Mbps interface with IT functionality such as Web-server, SSI-scripts, Flash file system, FTP-server, e-mail client, Telnet. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. It is built on a dedicated 32-bit RISC micro processor (+60 mips) ensuring fast and secure Ethernet performance. The CC-Link interface is a slave module for the CC-Link fieldbus system. It contains all the functionality needed to turn an application into a complete CC-Link remote device and it is configured to use the generic PLC profile. The CC-Link interface module is certified by the CLPA organisation and has proven conformance and interoperability with leading PLCs, HMIs and other devices. |
HMS Industrial Networks AB | Anybus X - Modbus TCP/IP to ControlNet Gateway, AB7636 | Network Gateway: The Anybus X-gateways are designed for use in Industrial Automation plants where increasingly many different Fieldbus and Ethernet networks are used. The X-gateways help System Integrators to easily interconnect Modbus TCP/IP, Modbus Plus, or Modbus-RTU to virtually any other network, enabling consistent information flow throughout the entire plant. The Ethernet interface consists of an embedded Modbus-TCP 10/100 Mbps interface with IT functionality such as Web-server, SSI-scripts, Flash file system, FTP-server, e-mail client, Telnet. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. It is built on a dedicated 32-bit RISC micro processor (+60 mips) ensuring fast and secure Ethernet performance. The ControlNet module can be opened from a ControlNet scanner. The size of the connection can be up to 450 bytes in each direction. The ControlNet module can be read or written to by UCMM (Unscheduled) messages from another ControlNet adapter (slave) or scanner (master). The module is equipped with two BNC contacts for connection to ControlNet. If redundant operation is desired, both connectors are used; otherwise either connector A or B is used. The module is also equipped with a NAP (Network access port) for temporary connection of configuration tools. The minimum Network update time, (NUT), of the module is 5ms. The ControlNet interface module is certified by the ODVA and has proven conformance and interoperability with leading PLCs, HMIs. |
HMS Industrial Networks AB | Anybus X-gateway - Modbus TCP/IP to DeviceNet Adapter/Slave Gateway, AB7635 | Network Gateway: Anybus X-gateways are designed for use in Industrial Automation plants where increasingly many different Fieldbus and Ethernet networks are used. The X-gateways help System Integrators to easily interconnect Modbus TCP/IP, Modbus Plus, or Modbus-RTU to virtually any other network, enabling consistent information flow throughout the entire plant. The Ethernet interface consists of an embedded Modbus-TCP 10/100 Mbps interface with IT functionality such as Web-server, SSI-scripts, Flash file system, FTP-server, e-mail client, Telnet. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. It is built on a dedicated 32-bit RISC micro processor (+60 mips) ensuring fast and secure Ethernet performance. The high-performance DeviceNet Slave interface provides instant connectivity to the DeviceNet network. The module conforms to DeviceNet 2.0. The DeviceNet interface module is certified by the ODVA and has proven conformance and interoperability with leading PLCs, HMIs. Baud rate and MAC ID can be set via DIP switches. |
HMS Industrial Networks AB | Anybus X-gateway - Modbus TCP/IP to DeviceNet Scanner/Master Bridge/Gateway, AB7630 | Network Gateway: Anybus X-gateways are designed for use in Industrial Automation plants where increasingly many different Fieldbus and Ethernet networks are used. The X-gateways help System Integrators to easily interconnect Modbus TCP/IP, Modbus Plus, or Modbus-RTU to virtually any other network, enabling consistent information flow throughout the entire plant. The Ethernet interface consists of an embedded Modbus-TCP 10/100 Mbps interface with IT functionality such as Web-server, SSI-scripts, Flash file system, FTP-server, e-mail client, Telnet. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. It is built on a dedicated 32-bit RISC micro processor (+60 mips) ensuring fast and secure Ethernet performance. The DeviceNet Master interface can act both as a Master/Scanner and/or Adapter/Slave. The entire DeviceNet protocol is implemented into the module. The module manages control of up to 63 DeviceNet slaves. Full DeviceNet configuration can be defined and loaded into the AnyBus-M module via the HMS configuration software NetTool-DN (purchased as a separate accessory) or via Rockwell?s RSNetWorx. |
HMS Industrial Networks AB | Anybus X Gateway - Modbus-TCP to J1939, AB7665 | Network Gateway: This Anybus X-gateway provides connectivity between ModbusTCP and a J1939 Heavy Duty vehicle (CAN) network. The X-gateway appears as a ModbusTCP slave/server allowing a ModbusTCP master/client to read or write data from the J1939 network. HMS provides the X-gateway with a Windows-based configuration tool (BWConfig). This PC-based software allows users to map J1939 parameter (PGN) data into a range of memory addressable through the X-gateway ModbusTCP interface. Configuration of the X-gateway is simple using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read to or written from the J1939 network. BWConfig then automatically maps the I/O table to a range of addresses accessible from the X-gateway ModbusTCP interface. The configuration is downloaded from the PC to the X-gateway on an RS232 connection and is saved in FLASH memory. |
HMS Industrial Networks AB | Anybus X-gateway - Modbus RTU Slave to CC Link Slave, AB7621 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. The CC-Link interface is a slave module for the CC-Link fieldbus system. It contains all the functionality needed to turn an application into a complete CC-Link remote device and it is configured to use the generic PLC profile. The CC-Link interface module is certified by the CLPA organisation and has proven conformance and interoperability with leading PLCs, HMIs. |
HMS Industrial Networks AB | Anybus X Gateway - Modbus RTU Slave to Modbus Plus Slave, AB7620 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. The Modbus Plus interface is based on licensed chip-set and software from Schneider Electric. Supporting both the Global Database and Register mapping to 3x and 4x registers this module implements a versatile Modbus Plus interface. The Modbus Plus interface module is certified by the Modconnect and has proven conformance and interoperability with leading PLCs, HMIs. |
HMS Industrial Networks AB | Anybus X Gateway - Modbus RTU Slave to ControlNet Adapter/Slave, AB7869 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to Profibus Slave Gateway, AB7850 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Profibus DP/DPV1 slave interface is implemented according to the standard IEC61158 as a modular slave, supporting all standard functionality such as Watchdog, Sync and Freeze and diagnostics. Standard DP as well as DPV1 acyclic data services (Class1/Class2) are supported. The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading PLCs, HMIs. Profibus address is set via rotary switches 0-99. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to Profinet IO Device, AB7659 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology. The Profinet IO baudrate is 100Mbps (full duplex). The IP-address and additional IP-settings is configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or the Profinet configuration tool. Four diagnostic LEDs continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection. IT-functions like Web-server, e-mail client, FTP-server are supported. IT functions can be used simultaneously with the Profinet IO communication. Modbus/TCP is also supported with 'Read Data' functions. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to Ethernet Modbus TCP Slave Gateway, AB7641 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is simple and carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. This gateway is a true Layer 7 gateway that converts application data to/from Ethernet Modbus/TCP <=> Modbus RTU, providing independent handling of each communication interface. For a transparent gateway between Ethernet Modbus/TCP <=> Modbus RTU, please look at the HMS part number AB7702. The Ethernet interface consists of an embedded ModbusTCP 10/100 Mbps interface with IT functionality such as Web-server, SSI-scripts, Flash file system, FTP-server, e-mail client, Telnet. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. It is built on a dedicated 32 bit RISC micro processor (+60 mips) ensuring fast and secure Ethernet performance. The EtherNet/ModbusTCP interface module has proven interoperability with leading PLCs, HMIs, other devices. The Modbus RTU Slave interface is implemented according to Modbus Protocol implementation guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baud rate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to Modbus RTU Slave Gateway, AB7899 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The gateway consists of two independent ModBus-RTU Slave interfaces, logically and galvanically separated. The Modbus RTU Slave interface is implemented according to Modbus Protocol implementation guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baud rate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to CANopen Slave Gateway, AB7895 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The CANopen interface is an adapter class product allowing fast data exchange. The CANopen slave's data map consists of Process Data Objects (fast data) and Service Data Objects (slow data). The data on the CANopen bus is updated when a change is made or on request from another node. The CANopen interface module is certified by the Can In Automation organisation (CANopen conformance: CIA DS-301 V3.0) and has proven conformance and interoperability with leading PLCs, SoftPLCs, HMIs. The Modbus RTU Slave interface is implemented according to Modbus Protocol implementation guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baud rate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to Interbus Slave FO Gateway, AB7890 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Interbus 2Mbps interface with a Fiber Optic bus-interface is an important complement to the standard module for copper-based cabling. The Fiber Optic module is based on the OPC chipset from Phoenix, which gives support for optical diagnostics. This means the unit has a high EMC immunity and also a very low EMC emission. The Interbus interface 2Mbps module is a slave node that can be read from/written to by an Interbus master. Interbus has two ways of exchanging data; one through fast cyclical I/O data called 'Process Data', and one through a somewhat slower protocol called PCP, mainly used for configuration purposes. It supports Interbus PCP V2.0. The module supports up to 10 words of data on the bus, out of which up to four words can be used for PCP. The Modbus RTU Slave interface is implemented according to Modbus Protocol implementation guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baud rate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to Interbus Slave Cu Gateway, AB7884 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Interbus 2Mbps interface module is a slave node that can be read from/written to by an Interbus master. Interbus has two ways of exchanging data; one through fast cyclical I/O data called 'Process Data', and one through a somewhat slower protocol called PCP, mainly used for configuration purposes. It supports Interbus PCP V2.0. The module supports up to 10 words of data on the bus, out of which up to four words can be used for PCP. The Modbus RTU Slave interface is implemented according to Modbus Protocol implementation guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baud rate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to FIP Slave Gateway, AB7877 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The FIPIO interface is based an embedded AnyBus-S module providing industrial performance and quality. FIPIO station address can be selected via switches on the end side of the module. A transformer connection on the module provides a isolated fieldbus interface. The Modbus RTU Slave interface is implemented according to Modbus Protocol implementation guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baud rate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to DeviceNet Adapter/Slave Gateway, AB7860 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The high performance DeviceNet Slave interface provides instant connectivity to the DeviceNet network. The module conforms to DeviceNet 2.0. The DeviceNet interface module is certified by the ODVA and has proven conformance and interoperability with leading PLCs, HMIs and other devices. Baud rate and MAC ID can be set via DIP switches. The Modbus RTU Slave interface is implemented according to Modbus Protocol implementation guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to J1939, AB7612 | Network Gateway: The Anybus-X J1939 Gateway provides connectivity between a Modbus RTU (serial) network and a J1939 Heavy Duty vehicle (CAN) network. The ABX appears as a Modbus Slave device allowing a Modbus Master to read or write data from the J1939 network. HMS provides the ABX with a Windows based configuration tool (BWConfig). This PC based software allows the user to map J1939 parameter (PGN) data into a range of memory addressable through the ABX Modbus RTU interface. The ABX is configured using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read or written from the J1939 network. BWConfig will automatically map the I/O table to a range of addresses accessible from the ABX Modbus RTU interface. The configuration is downloaded from the PC to the ABX via an RS232 connection and is saved in FLASH memory. |
HMS Industrial Networks AB | Anybus X - Modbus RTU Slave to Ethernet/IP/Adapter/Slave, AB7839 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Ethernet interface consists of an embedded Ethernet/IP 10/100 Mbps interface with IT functionality such as Web-server, SSI-scripts, Flash file system, FTP-server, e-mail client, Telnet. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. It is built on a dedicated 32 bit RISC micro processor (+60 mips). The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLCs, HMIs. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X Gateway - Modbus RTU Slave to AS-Interface Master, AB7828 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The AnyBus-M AS-Interface Master module supports up to 62 slaves with a maximum of 248 digital input, 186 output signals. All standard services are available including detailed diagnostics. The network interface is optically isolated and equipped with a two-pin pluggable screw connector. The Master supports intelligent auto-configuration or manual configuration via terminal program such as Hyper Terminal for Windows. The AS-interface module is certified by the AS Interface user organization and has proven conformance and interoperability with leading manufacturers of I/O, sensors, valves etc. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X Gateway - Modbus RTU Slave to DeviceNet Scanner/Master, AB7817 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The DeviceNet Master interface can act both as a Master/Scanner and/or Adapter/Slave. The entire DeviceNet protocol is implemented into the module. The module manages control of up to 63 DeviceNet slaves. Full DeviceNet configuration can be defined and loaded into the AnyBus-M module via the HMS configuration software NetTool-DN (purchased as a separate accessory) or via Rockwell?s RSNetWorx. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus X Gateway - Modbus RTU Slave to Profibus Master, AB7808 | Network Gateway: The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading manufacturers of I/O, drives, instruments etc. Configuration is downloaded to the module via the RS232 configuration port. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. |
HMS Industrial Networks AB | Anybus® CompactCom C30 - Modbus TCP Chip | I/O Interface: The Anybus CompactCom C30 chip solution includes network controllers for Profibus, Ethernet networks, and CAN-based networks, all fitted in a small BGA housing of just 10 x 10 mm. This provides a tight and optimized integration between the C30 solution and the host device's processor. CompactCom C30 does not interfere with your host processor. It complements your main application micro-processor by off-loading it from communication tasks. |
HMS Industrial Networks AB | Anybus X-gateway AB9004, Modbus TCP Master/Client to CANopen | Network Gateway: The X-gateway acts as translator between a Modbus-TCP network and a CANopen network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides Modbus-TCP Client (Master) functionality to the (downlink) Modbus-TCP network and acts as a CANopen Slave on the control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway AB9009, Modbus TCP Master/Client to CC-Link | Network Gateway: The AB9009 Anybus X gateway acts as translator between a Modbus TCP network and a CC-Link network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides Modbus TCP Client (Master) functionality to the (downlink) Modbus TCP network and acts as a CC-Link Slave on the control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway AB9003, Modbus TCP Master/Client to ControlNet | Network Gateway: The X-gateway acts as translator between a Modbus TCP network and a ControlNet network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides Modbus TCP Client (Master) functionality to the (downlink) Modbus TCP network and acts as a ControlNet Slave/Adapter on the control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway AB9002, Modbus TCP Master/Client to DeviceNet | Network Gateway: The X-gateway acts as translator between a Modbus TCP network and a DeviceNet network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides Modbus TCP Client (Master) functionality to the (downlink) Modbus TCP network and acts as a DeviceNet Slave/Adapter on the control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway AB9006, Modbus TCP Master/Client to EtherNet/IP | Network Gateway: The X-gateway acts as translator between a Modbus TCP network and a EtherNet/IP network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides Modbus TCP Client (Master) functionality to the (downlink) Modbus TCP network and acts as a EtherNet/IP Slave/Adapter on the control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway AB9000, Modbus TCP Master/Client to EtherCAT | Network Gateway: The X-gateway acts as translator between a Modbus TCP network and an EtherCAT network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides Modbus TCP Client (Master) functionality to the (downlink) Modbus TCP network and acts as a EtherCAT Slave on the control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway AB9005, Modbus TCP Master/Client to Modbus RTU Slave | Network Gateway: The X-gateway acts as translator between a Modbus TCP network and a Modbus RTU network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides Modbus TCP Client (Master) functionality to the (downlink) Modbus TCP network and acts as a Modbus RTU Slave on the control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway AB9008, Modbus TCP Master/Client to Modbus TCP Slave/Server | Network Gateway: The X-gateway in this combination acts as a PLC extension by allowing you to extend an existing Modbus TCP network. The primary focus is the fast transfer of cyclic I/O data exchange. It provides Modbus TCP Client (Master) functionality to the (downlink) Modbus TCP network and acts as a Modbus TCP Slave on the existing control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway AB9001, Modbus TCP Master/Client to PROFIBUS | Network Gateway: The X-gateway acts as translator between a Modbus TCP network and a PROFIBUS network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides Modbus TCP Client (Master) functionality to the (downlink) Modbus TCP network and acts as a PROFIBUS Slave on the control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway AB9007, Modbus TCP Master/Client to PROFINET | Network Gateway: The X-gateway acts as translator between a Modbus TCP network and a PROFINET network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides Modbus TCP Client (Master) functionality to the (downlink) Modbus TCP network and acts as a PROFINET Slave on the control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway AB7308, CANopen-Modbus TCP Slave to CANopen Master/Manager | Network Gateway: The X-gateway acts as translator between an existing Modbus TCP network and a CANopen network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides full CANopen Master/Client functionality to the (downlink) CANopen network and acts as a Modbus TCP Slave on the control (uplink) network. |
HMS Industrial Networks AB | Anybus X-gateway CANopen AB7305, Modbus RTU Slave to CANopen Master/Manager | Network Gateway: The X-gateway acts as translator between an existing Modbus RTU network and a CANopen network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides full CANopen Master/Client functionality to the (downlink) CANopen network and acts as a Modbus RTU Slave on the control (uplink) network. |
HMS Industrial Networks AB | Netbiter® EasyConnect EC250 remote communication gateway | Remote Terminal Unit: Wherever your field equipment is located, just simply connect it to an EC250 gateway and you will start to receive data instantly from your field equipment via the cloud-based Netbiter Argos data center, provided free of change from HMS. The EC250's plug-and-play feature makes it possible to perform large scale installations quickly without being an IT/Mobile network expert and makes it possible to monitor and control Modbus devices and networks remotely. |
JVL Industri Elektronik A/S | Servo Motor MAC 141 | AC/DC Drive Control: These stainless steel motors are designed to handle IP67 and withstand high pressure wash down conditions. JVL stainless steel servo motors are designed to be a durable solution for long time operation. The concept is based on a totally sealed stainless steel tube with front flange and rear cover also in stainless steel. It can be delivered with a built-in planetary gear box in ratios from 3:1 to 216:1. |
Kepware Technologies | Modbus OPC Server Suite for KEPServerEX, EX5-MDBUS-NA00 | Software - OPC: Kepware's Modbus OPC Server Suite works in conjunction with KEPServerEX to provide OPC Data Access to Modbus compatible devices and PLCs. The intuitive user interface of KEPServerEX allows users to easily set up reliable Modbus connections. Currently, the suite includes the Modbus Ethernet, Modbus RTU Serial, Modbus RTU Slave, Modbus ASCII Serial, and Modbus Plus drivers. Users can employ all of the drivers included in the suite to connect to an unlimited number of compliant devices with a single license. |
Kübler Group, Fritz Kübler GmbH | Absolute encoders - multiturn, Sendix F5868/F5888 | AC/DC Drive Control: The Sendix F58 multiturn with patented Intelligent Scan Technology™ is a high-resolution optical multiturn encoder without gears and with 100 percent magnetic insensitivity. 32 bits total resolution, through hollow shaft up to 15 mm and Modbus RTU interface. |
LINAK A/S | Linear Actuator LA36 | AC/DC Drive Control: LA36 is ideal for use in harsh conditions. It is designed to operate under extreme conditions, ideal for mobile 'off-highway' equipment such as agricultural, forestry and construction machinery. |
Mac Valves, Inc. | MI/O-67® | I/O Interface: The MI/O-67® communications module is the brains of the MI/O-67® platform and is the minimum required module to implement a fieldbus solution. Each communication module is capable of driving up to 32 solenoids (32 singles, 16 doubles max or any combination of the two up to 32 solenoids) on the MAConnect® stack. The module is capable of outputting 8A max (0.5 A max per channel) to the MAConnect® stack. You can connect up to 12 additional modules to each communication module and have 8A shared across those additional modules. All of the MI/O-67® modules operate on a 24VDC negative common setup, attached to the MAConnect® stack via a valve series specific adapter. |
Matrikon Inc. | OPC Device Drivers | Software - OPC: The Matrikon OPC Server for Modbus provides connectivity to MODBUS compliant devices such as any PLC, RTU, DCS. The server connects to multiple devices using one or more protocols at the same time. Each read/write with the devices is optimized to maximize throughput. The server has been tested with hardware from vendors such as ABB, Emerson, Honeywell, Koyo, Schneider (Modicon), Triconex, Yokogawa, and many others. |
Matrikon Inc. | SCADA Modbus OPC Server | Software - OPC: The Matrikon OPC Server for Modbus SCADA provides connectivity to any Modbus SCADA compliant RTU, IED (Intelligent Electronic Device), PLC, meter, transducer, relay, etc. This server connects and manages multiple devices using one or more communication channels. Each read/write with the devices is optimized to maximize throughput. |
MKS Instruments, Inc. | CDN067-3 DeviceNet to Modbus Interface | Network Gateway: The CDN067-3 is a compact RS485 to DeviceNet serial gateway which provides a flexible interface between DeviceNet systems and Modbus peripheral equipment. |
Molex, LLC | SST-ESR2-CLX-RLL | I/O Interface: Connects Allen-Bradley ControlLogix to Modbus and/or Modbus TCP network. Fully integrated into the Rockwell environment, the SST-ESR2-CLX-RLL includes simple-to-use software with AOP. Includes two independent Modbus channels and single Modbus TCP port. |
Molex, LLC | SST-SR4-CLX-RLL | I/O Interface: SST™ communication modules for Rockwell ControlLogix systems connect Allen-Bradley ControlLogix to a Modbus Serial network. Each SR4 module has 4x serial communication channels that act independently and are electrically isolated from each other to perform powerful data exchange with industrial devices such Modbus Masters or Slaves. |
Molex, LLC | SST-ESR2-CPX-S and SST-ESR2-CPX-P | I/O Interface: Connects an Allen-Bradley CompactLogix to Modbus and/or Modbus TCP network; Fully integrated into the Rockwell envirionment, the devices include simple-to-use software with AOI (Add-On-Instruction). Two independent Modbus channels and single Modbus TCP port. |
Molex, LLC | Brad® applicom® Network Interface Cards | SCADA Hardware: Brad® applicom® Network Interface Cards quickly connect PC-based industrial applications. Network Interface Cards are a range of intelligent communication solutions, complete and ready to use covering more than 40 protocols among a wide choice of industrial networks and fieldbuses: Modbus, Modbus TCP, PROFIBUS, Modbus Plus, WorldFIP and Serial Links. These solutions connect your PC-based applications (HMI, SCADA, MES, custom applications) to industrial equipment, such as programmable controllers, I/O modules, Panel PC, process instruments via PCI connection. Includes simple-to-use configuration software with diagnostic tools. Independent Modbus and Modbus TCP ports. |
Molex, LLC | Brad® applicom® Serial Network Cards | SCADA Hardware: Brad® applicom® PCI and PCI Express Serial Network Interface Cards are a range of intelligent communication solutions, complete and ready to use covering more than 40 protocols among a wide choice of industrial networks and fieldbuses. They connect your PC-based applications (HMI,SCADA, MES, custom applications) to industrial equipment, such as programmable controllers, I/O modules, Panel PCs, and process instruments. |
Molex, LLC | Brad® applicomIO Modbus TCP network Interface Card | HMI Hardware: Brad® applicomIO Ethernet network interface cards provide data acquisition for PC-based control and visualization applications. Brad applicom IO products are designed for industrial applications independent of the fieldbus used. Brad applicomIO products consist of a fieldbus card and engineering tools to quickly and easily setup communication. |
Molex, LLC | BradControl® Modbus I/O Modules | I/O Module: BradControl® Modbus I/O modules provide a reliable solution for connecting industrial controllers to I/O devices in harsh duty environments. With an IP67-rated housing, BradControl I/O modules can be machine mounted and can withstand areas where liquids, dust or vibration may be present. Advanced network features such as 10/100 Mbps auto-sensing, web server capabilities and a flexible IP address setup method, make configuration and operation simple. |
Molex, LLC | Direct-Link® Industrial Ethernet Switches, Series 200 & 300 | Misc. Hardware: Unmanaged and managed RJ45 Industrial Ethernet Switches that are IP20 or IP30 with fiber options available. Plug-and-play Ethernet switches that are simple to install. |
Molex, LLC | Unmanaged M12 Industrial Ethernet Switches | Misc. Hardware: IP67-rated unmanaged M12 Industrial Ethernet Switches that are robust and can be machine mounted. Applicable for even the harshest environments. |
Molex, LLC | PICS Simulation® Software | Software - Testing and Simulation: I/O Simulation that reduces the risks and eliminates unnecessary shutdowns. Base package comprised of software and hardware key. |
Moxa | MGate 5101-PBM-MN Series | Network Gateway: The MGate 5101-PBM-MN gateway features enable bridging PROFIBUS devices (PROFIBUS drives or meters) to Modbus TCP master (SCADA or PLCs) with ease. In addition, its rugged design with optional built-in optical isolation, and -40 to 75°C wide-temperature operation, ensures reliable performance for use in industrial applications such as oil/gas, power, process automation and factory automation. |
Moxa | EDS-405A/408A Series | Misc. Hardware: Five- and eight-port entry-level managed Ethernet switches |
Moxa | MGate MB3170/3270 | Network Gateway: The MB3170 and MB3270 are advanced Modbus gateways that provide maximum flexibility for integrating industrial Modbus networks of all types and sizes. They are designed to integrate Modbus TCP, ASCII, and RTU devices in almost any master and slave combination, including serial master to serial slave, or simultaneous serial and Ethernet masters. |
Moxa | MGate, MB3180/3280/3480 | Network Gateway: The MGate MB3000 gateways effectively connect a high density of Modbus nodes to the same network. The MB3280 manages up to 62 serial slave nodes; the MB3480 manages up to 124 serial slave nodes. Each RS-233/422/485 serial port can be configured individually for Modbus RTU or Modbus ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway. |
Moxa | ioLogik E1200 Series | I/O Module: Ethernet remote I/O with two-port Ethernet Switches |
Moxa | TN-5524-8PoE Series | Misc. Hardware: EN 50155 24-port managed Ethernet switches with 8 PoE ports |
Moxa | ioLogik E2200 series | Controller: PC-based data acquisition solution with easy-to-use Click&Go control logic |
Moxa | IKS-6726/6728 Series | Misc. Hardware: 24+2G/24+4G-port modular managed Ethernet switches |
Moxa | ioLogik E4200 | I/O Interface: Modular remote I/O solution for data acquisition and control |
Moxa | MGate 5105-MB-EIP Series | Network Gateway: The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and EtherNet/IP network communications. To integrate existing Modbus devices onto an EtherNet/IP network, use the MGate 5105-MB-EIP as a Modbus master or slave to collect data and exchange data with EtherNet/IP devices. The latest exchange data will be stored in the gateway as well. The gateway converts stored Modbus data into EtherNet/IP packets so the EtherNet/IP scanner can control or monitor Modbus devices. |
Moxa | MGate 5109 Series | Network Gateway: The MGate 5109 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and DNP3 serial/TCP/UDP protocol conversion. All modelsare protected with a rugged metallic casing, are DIN-rail mountable,and offer built-in serial isolation. The MGate 5109 supports transparentmode for easily integrating Modbus TCP to Modbus RTU/ASCII networks or DNP3 TCP/UDP to DNP3 serial networks. The MGate 5109 also support agent mode to exchange data between Modbus and DNP3 networks or to act as a data concentrator for multiple Modbus slaves or multiple DNP3 outstations. The rugged design is suitablefor industrial applications such as power, oil & gas, and water and wastewater. |
Moxa | MGate 5111 Series | Network Gateway: The MGate 5111 is a rugged industrial Ethernet gateway to integrate Modbus devices onto a PROFIBUS network, which means MGate 5111 is considered as a Modbus master/slave or EtherNet/IP Adapter to exchange data with PROFIBUS master. The MGate 5111 not only provides the ease-of-use wizard to guide user to configure in few steps, but also offers various maintenance functions such as Modbus traffic monitoring and protocol diagnostics to help user quick troubleshooting. Moreover, Status Monitoring eliminates connection failure difficulties for PLC/SACDA by providing extra mechanism to indicate status of Modbus command. MGate 5111 also supports redundant dual DC power inputs and a relay output for operation reliability. |
Moxa | MGate 5114 Series | Network Gateway: The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating widely power common use protocols, MGate 5114 provides the flexibility to fulfill various conditions when facing the difference of protocols used between the field devices and the power SCADA. To integrate Modbus or IEC 60870-5-101 devices onto a IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems. |
Moxa | MGate 5118 Series | Network Gateway: The MGate 5118 gateways support the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments. |
Moxa | MGate MB3660 Series | Network Gateway: The MGate MB3660 (MB3660-8 and MB3660-16) series gateways are redundant Modbus gateways that convert between the Modbus TCP and Modbus RTU/ASCII protocols. They can be accessed by up to 256 TCP master/client devices, or connect to 128 TCP slave/server devices. The MGate MB3660 series isolation model provides 2 kV isolation protection suitable for power substation applications. The MGate MB3660 gateways are designed to easily integrate Modbus TCP and RTU/ASCII networks. The MGate MB3660 series gateways offer features that make network integration easy, customizable, and compatible with almost any Modbus network. |
MYNAH Technologies | DeltaV Virtual IO Module Network Gateway (VIM) | Network Gateway: DeltaV Virtual IO Module (VIM) Network Gateway provides a native DeltaV IO Interface to open plant Ethernet networks and devices that use the Modbus TCP/IP or Ethernet/IP protocol. DeltaV Controllers can read and write signals from plant floor devices that use these Ethernet networks such as PLC's Motor Control Centers and Weigh Scales. |
National Instruments Corporation | LabVIEW Modbus Library | Software - Device Driver: The Modbus library is a free, downloadable set of VI function blocks that provide Modbus communication from any standard Ethernet or serial port. The LabVIEW library implements the Modbus protocol in software and offers both master and slave functionality. Using the Modbus library, programmable automation controllers can communicate with gateway devices that provide connectivity to a wide variety of industial networks, such as Profibus, EthernetIP, and DeviceNet. |
National Instruments Corporation | Real-Time Embedded Vision System, EVS-1464RT | Controller: Rugged automation controller that combines industrial camera connectivity with open communication. The NI EVS-1464RT is designed to acquire and process images in real time from multiple IEEE 1394 and GigE Vision cameras for machine vision applications such as high-speed sorting, assembly verification, and packaging inspection. Send commands and data to other devices, such as PLCs and operator interfaces, using Ethernet protocols such as TCP/IP, EtherNet/IP, and Modbus TCP, as well as serial protocols such as RS232 and Modbus serial. |
NETxAutomation Software GmbH | NETx BMS Server | Software - OPC: The NETx BMS Server is a software solution that is responsible for collecting and processing data points from different building automation technologies. It provides a Modbus interface to integrate Modbus data points (Coils, Discrete Inputs, Holding Registers, Input Registers) via Modbus TCP. Native Modbus RTU devices can be connected via UDP/IP or TCP/IP via simple IP-to-RS485 converters. Drivers for other protocols (e.g., KNX, BACnet, SNMP, MICROS Fidelio/Opera, Protel, VingCard) are supported for bidirectional data exchange with Modbus. Using the build-in web server, web-based visualizations can be provided. Data can also be accessed by any third-party client using open management interfaces, such as OPC, BACnet. |
Opto22 | groov Server for Windows, GROOV-SVR-WIN | Software - HMI: groov Server for Windows, GROOV-SVR-WIN, includes groov software (groov Build for building operator interfaces and groov View for using them) and is ready for installation on a Microsoft® Windows® PC. Once installed, groov Server runs as a service on your computer. A fully functional version of the software-based groov Server for Windows is available to download and try so you can see your own system?s data on a smartphone, tablet, or other mobile device. |
Opto22 | Analog and Digital SNAP Brain, SNAP-B3000-MODBUS | I/O Interface: With the SNAP-B3000-Modbus brain, you can use Opto 22 industrial I/O hardware with your existing Modbus-compatible controller. The SNAP-B3000-Modbus is a high-performance brain designed to remotely control a mix of both analog and digital I/O modules using the SNAP B-series I/O mounting racks. With SNAP B Series racks and any combination of compatible analog and digital SNAP I/O® modules, this brain provides a powerful and sophisticated I/O handling system. The on-board intelligence of the SNAP-B3000-Modbus offers many distributed control functions. |
Opto22 | E1 and E2 Brain Boards | I/O Interface: E1 and E2 brain boards are Ethernet-ready I/O and communication processors for digital and analog I/O systems. The E1 connects to a rack of Opto 22 G1, G4, or Quad Pak™ digital I/O modules, while the E2 connects to a rack of Opto 22 G1 analog I/O modules. Each brain board communicates with a host computer and performs control functions for each I/O point. |
Opto22 | SoftPAC Software-based Controller | Controller: SoftPAC™ is a software-based programmable automation controller (PAC) designed for PC-based control. SoftPAC gives you the choice of running your control program in a Microsoft Windows environment rather than on a standalone or rack-mounted PAC. SoftPAC is designed for machine builders or OEMs who may already have a PC in their product or want to use one for a new design. |
Opto22 | IOP-INT-MBSER Modbus/Serial Integration Kit for ioControl | Software - Programming: This Modbus/Serial Integration Kit for ioControl allows Opto 22 Ultimate I/O controllers, using ioControl, to connect via a serial network to any Modbus device and communicate using the Modbus RTU or ASCII protocols. The Integration Kit contains a set of ioControl master subroutines, an example Modbus slave strategy, and ioDisplay master and slave projects to show communication between the example strategies and a Modbus device. |
Opto22 | Modbus/TCP Integration Kit for ioProject | Software - Programming: This Modbus/TCP Integration Kit for ioControl allows Opto 22 controllers using ioControl to connect via Ethernet to any Ethernet/TCP-Modbus device and communicate using the Modbus/TCP protocol. |
Opto22 | Modbus Integration Kit for OptoControl | Software - Programming: The OPTOINTMB is an integration kit for communicating between OptoControl and third-party serial Modbus RTU or ASCII protocol devices. The integration kit includes subroutines, example strategies, and documentation. This kit is compatible with OptoControl 2.2 and newer. |
Opto22 | Modbus Integration Kit for PAC Control, PAC-INT-MB | Software - Programming: This Modbus Integration Kit for PAC Control allows Opto 22 SNAP PAC controllers using PAC Control to communicate using the Modbus Serial RTU, Modbus Serial ASCII or Modbus TCP protocol. This kit replaces the Modbus/TCP Integration Kit for PAC Control (part # PAC-INT-MBTCP) and the Modbus Serial Integration Kit for PAC Control (part # PAC-INT-MBSER). |
Phoenix Contact | Fiber Optic Converter | Misc. Hardware: The PSI-MOS fiber optic converter system enables users to transmit fiber optic data for the most popular serial communication interfaces and bus systems. The PSI-MOS fiber optic converters allow complete isolation of Interbus, Profibus, Modbus, DeviceNet, CANopen, RS-232, and other RS-485 networks by converting the electrical copper-based signals to glass or polymer fiber technology. |
Phoenix Contact | Managed Compact Switch (MCS) | Misc. Hardware: Managed Compact Switch combines high performance with reduced installed cost required for distributed Ethernet applications. |
Phoenix Contact | FL COM SERVER RS232 | Network Host Adapter: The Serial Device Server FL COM SERVER RS232 allows the integration of RS-232-based end devices in 10/100 BASE-T(X) networks. |
Phoenix Contact | nanoLine (nLC50 ) | Controller: nanoLine is a small programmable controller/relay with Ethernet connectivity (MODBUS TCP server or MODBUS RTU server), a removable operator display and easy flow chart programming. nanoLine is designed to control small to midsize machines that require few I/O points. Base controller stations are available in 24 V DC, 24 V AC/DC and 115 V AC versions. The on-board I/O consists of digital inputs and outputs. The nanoLine accommodates up to three I/O expansion modules, bringing the total possible I/O count to 24 digital inputs and 16 digital outputs. |
PiiGAB | MBus2Modbus | Network Gateway: Gateway/converter series developed for remote reading of M-Bus meters with up to four clients simultaneously. With this product it is possible to parallel connect a Modbus client to read values from an M-Bus meter to a PLC/RTU or to be shown on a local display. The gateway includes the option of a Modbus slave. The Modbus slave can be used independently or together with external systems such as SCADA systems or configuration tools. |
PiiGAB | Modbus2MBus | Network Gateway: The application Modbus2MBus for the PiiGAB M-Bus 900 gateway is developed to enable communication via M-Bus with Modbus units in an existing M-Bus network. Users are also able to extend an existing M-Bus network with Modbus. This provides a unique opportunity to use both M-Bus and Modbus at the same M-Bus network. For example, one can communicate with meters, heat pumps, cooling units, PLC, distributed I/O units etc. that are using the Modbus protocol. The gateway works as a translator between the two protocols. This allows M-Bus based systems to communicate directly with Modbus units. |
POSITAL-FRABA Inc. | Absolute Rotary Encoder, Series OCD-EM | Sensor: The Modbus encoders provide the full functional scope of FRABA's Ethernet TCP/IP models. Apart from position and velocity values, the output data also includes a time stamp. Each of these values can be switched in as required. The encoders can be connected to a PC, network or Modbus PLC via a robust M12 plug. The maximum data exchange rate is 100 MBit/s via Modbus/TCP. An integrated web server provides HTML pages with embedded Java applets, allowing the encoders to be configured, read out and tested via company networks or Internet. |
proconX Pty Ltd | MBDC-200 | Monitoring Hardware: MBDC-200 is an autonomous Modbus data concentrator and collector. |
proconX Pty Ltd | MODG-1 00 and MODG-1 02 | Network Gateway: MODG-1 00 and MODG-1 02 are a single and dual-port Modbus/TCP to Modbus RTU gateways. |
proconX Pty Ltd | MBRG-300 Managed Modbus Router and Gateway | Network Gateway: MBRG-300 is an advanced Modbus gateway and router. The MBRG-300 features two serial ports which can be configured as either RS-232 or RS-485 layer or by combining the two ports as a single RS-422 link. The router has also an Ethernet port. |
proconX Pty Ltd | ESENET Ethernet Gateway | Network Gateway: ESENET is an Ethernet gateway specifically designed to interface Woodward's Easygen series genset controls with Modbus TCP networks. It interfaces via the load sharing CAN bus with the Woodward controls. |
proconX Pty Ltd | GCP-MG Modbus Gateway | Network Gateway: GCP-MG is a next-generation Modbus/CAN gateway specifically designed to interface Woodward's GCP-30 series genset controls (GCP-31, GCP-32), and LS 4 circuit breaker controls with Modbus networks. The GCP-MG gateway has been developed in cooperation with Woodward to ensure the highest possible degree of interoperability with Woodward equipment. |
Proportion-Air, Inc. | Pressure Control Valve | Misc. Hardware: Electro-pneumatic pressure control and flow control valves equipped with the Modbus Serial bus. The serial communications capability is now available on the popular QBT, QPV, and QB3 series of pressure control valves which operate as Modbus slaves. |
ProSoft Technology Inc | ProLinx A-B Remote I/O Adapter | Network Gateway: The ProLinx family A-B Remote I/O Adapter to Modbus Master/Slave communications module (5601-RIO-MCM) creates a powerful connection between devices on a Remote I/O network and Modbus devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Remote I/O port and up to four serial ports. The RIO interface is an adapter (slave) which can be connected to a scanner (master) that controls the data transfer. The module also supports limited high speed data transfer via the Input and Output images. The Modbus (MCM) protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution. |
ProSoft Technology Inc | Modbus Master/Slave Module for FLEX - MVI94-MCM | I/O Interface: The MVI94 Modbus Master/Slave Communication Module allows Rockwell Automation FLEX processors to interface easily with other Modbus protocol compatible devices. Compatible devices include not only Modicon PLCs (which all support the Modbus protocol) but also a wide assortment of end devices. A 5000-word register space in the module exchanges data between the processor and the Modbus network. |
ProSoft Technology Inc | Modbus Slave Adapter for FLEX or Integra I/O modules, 3170-MBS | I/O Interface: The 3170-MBS Modbus Slave Communication Adapter can interface up to 8 Rockwell Automation FLEX and/or Integra I/O modules directly with any Modbus Master. |
ProSoft Technology Inc | Modbus TCP to ASCII Generic Serial Gateway, 5201-MNET-ASCII | Network Gateway: The 5201-MNET-ASCII stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and up to four ASCII configurable serial ports. The Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other devices supporting the protocol. Supports both Client and Server connections, and when coupled with the Web option provides a web/ftp interface also. The ASCII protocol driver permits the module to interface to many ASCII devices. Each ASCII port on the module is configurable to send and/or receive ASCII strings, each supporting its own individual serial network. |
ProSoft Technology Inc | Modbus Serial Module for CompactLogix L1 and Point I/O Adapters, ILX34-MBS232 | I/O Interface: The module can be used in CompactLogix L1 processors or Distributed 1734 Point I/O systems. Can be configured as a Master or Slave. |
ProSoft Technology Inc | Modbus TCP to Rockwell Automation Remote I/O Gateway, 5210-MNET-RIO | Network Gateway: Stand-alone DIN-rail mounted protocol gateway with one Ethernet port and one Remote I/O port. The Modbus TCP driver can interface many different protocols into Schneider Electric Quantum processors as well other solutions supporting the protocol. Supports both Client and Server connections; When coupled with the Web option provides a web/ftp interface as well. The RIO interface is an adapter (slave) that can be connected to a scanner (master) that controls the data transfer. Also supports limited high-speed data transfer via the Input and Output images. |
ProSoft Technology Inc | EtherNet/IP to Modbus Master/Slave Gateway 4 Port, 5201-DFNT-MCM | Network Gateway: Stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and up to four serial ports. The EtherNet/IP protocol driver supports the Explicit Messaging implementation of the protocol. User-configurable as both a Client and a Server, the EtherNet/IP port is a powerful data transfer tool. The Modbus protocol driver supports Master and Slave implementations. Modbus serial ports are individually configurable, providing a powerful and flexible host or device interface solution. |
ProSoft Technology Inc | PROFIBUS Master for Modicon Modbus TCP, 5204SE-MNET-PDPMV1 | Network Gateway: Automating integration for Schneider Electric® Modicon® processors and maximizing ease-of-use are the hallmark design criteria behind the ProLinx® SE line of communication gateways. The Application Communication Logic functions built into ProSoft Configuration Builder (PCB) automatically generate all the Unity? Pro data types, variables, and logic required for the M340 or Quantum to perform PROFIBUS DP-V1 cyclic and acyclic communication. |
ProSoft Technology Inc | Modbus TCP Client/Server Enhanced Network Interface Module for ControlLogix, MVI56E-MNET/MNETXT | I/O Interface: MVI56E enhancements include local and remote configuration and diagnostics through the module's Ethernet port, CIPconnect technology for bridging though Rockwell Automation ControlNet and EtherNetIP networks, and an on-board web server for access to module documentation and sample program files. The MVI56E-MNET and MVI56E-MNETXT are functionally the same. The MVI56E-MNET is designed for standard process applications. The MVI56E-MNETXT is designed for the Logix-XT control platform, allowing it to operate in extreme environments, at higher operating temps, and has a conformal coating to protect it from harsh or caustic conditions. |
ProSoft Technology Inc | Ethernet to Belden 9463 Blue Hose Industrial Media Converters, IMC-BHx-AC | I/O Interface: ProSoft's IMC-BHx-AC Industrial Media Converters allow users to simultaneously run EtherNet/IP and A-B Remote I/O data on existing Belden 9463 Blue Hose media. Once Industrial Media Converters have been added to the system, users can deploy a phased upgrade of their legacy control system. A Logix system can be deployed on top of the existing Remote I/O infrastructure allowing users to upgrade their legacy I/O, drives, HMIs and other end devices. Upgrading your control system can be done during scheduled downtime, saving time and money. |
ProSoft Technology Inc | Modbus Master/Slave Network Interface Module for CompactLogix, MVI69-MCM | I/O Interface: The MVI69 Modbus Master/Slave Network Interface Module allows Rockwell CompactLogix processors to interface with Modbus-compatible devices. These include not only Modicon PLCs but also a wide assortment of third-party devices found in nearly every industry. |
ProSoft Technology Inc | EtherNet/IP to Modbus Serial 4 Port, PLX31-EIP-MBS4 | Network Gateway: Stand-alone DIN-rail mounted gateways that provide one Ethernet port for communication, allowing for remote configuration and diagnostics, and up to four (4) serial communication ports. PLX30 gateways also come with an SD Card slot (SD card optional) for storing configuration files. In the event of a failure the SD card can be transferred to another gateway reducing downtime. These gateways also come with a wide input power range (10 Vdc to 36 Vdc), and an extended temp range (-25°C to 70°C ). Includes all the necessary cables required for communication. |
ProSoft Technology Inc | Modbus Master/Slave Module for SLC Platform, MVI46-MCM | I/O Interface: The MVI46 Modbus Master/Slave Communication Module allows Rockwell Automation SLC processors to interface easily with other Modbus protocol compatible devices. Compatible devices include not only Modicon PLCs (which all support the Modbus protocol) but also a wide assortment of end devices. The module acts as an input/output module between the Modbus network and the Rockwell Automation backplane. The data transfer from the processor is asynchronous from the actions on the Modbus network. |
ProSoft Technology Inc | Modbus TCP/IP Ethernet Module for SLC Platform, MVI46-MNET | I/O Interface: The MVI46 Modbus TCP/IP Communication Module is designed to allow SLC processors to interface easily with other Modbus TCP/IP protocol-compatible devices using client and server functionality. Compatible devices include not only Modicon processors (which support the Modbus TCP/IP protocol) but also a wide assortment of other clients and server devices. |
ProSoft Technology Inc | Modbus TCP to PROFIBUS DPV1 Master Gateway, 5204-MNET-PDPMV1 | Network Gateway: The 5204-MNET-PDPMV1 stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and PROFIBUS DP Master configurable DB-9F port. The Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other devices supporting the protocol. Supports both Client and Server connections, and when coupled with the Web option provides a web/ftp interface as well. The PROFIBUS DP Master protocol driver supports complete Master specifications according to IEC 61158 on either a Mono-Master or Multi-Master network. The module supports the DPV1 specification. |
ProSoft Technology Inc | ProLinx Modbus Plus to Modbus Master/Slave 5301/5302-MBP-MCM(4) | Network Gateway: ProLinx Modbus Plus to Modbus Master/Slave Gateways provide one Modbus Plus port and up to four Modbus-enabled serial ports. The Modbus Plus protocol driver supports both Master and Slave implementations on the DB9 Female Modbus Plus port. The Modbus Plus port is fully configurable. The Modbus protocol driver supports Master and Slave implementations. All Modbus serial ports are individually configurable, providing a powerful and flexible host or device interface solution. |
ProSoft Technology Inc | Modbus Plus to Modbus TCP Gateway, 5303-MBP-MNET | Network Gateway: The 5303-MBP-MNET stand-alone DIN-rail mounted protocol gateway provides one Modbus Plus configurable DB9F port and one Ethernet port. Supports both Master and Slave implementations of the protocol on the DB9 Female Modbus Plus port. The Modbus Plus port is fully configurable. The Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other devices supporting the protocol. The MNET driver supports Client and Server connections, and when coupled with the Web option also provides a web/ftp interface. |
ProSoft Technology Inc | ProLinx Modbus Master/Slave to HART Multi-drop 5107-MCM-HART/5127-MCM-HART2 | Network Gateway: The ProLinx family Modbus Master/Slave to HART Multi-Drop communications module (5107-MCM-HART/5127-MCM-HART2) creates a powerful connection between devices on a Modbus network and HART devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one serial port and up to eight configurable HART channels. The Modbus (MCM) protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution. The HART protocol driver works as a Master on four (HART) or eight channels (HART2 - not available on certain configurations) per interface card, depending on implementation. Each channel is individually configurable. |
ProSoft Technology Inc | Message Manager for Industrial Communication, ILX56-MM | I/O Interface: Easy-to-use data transfer engine for the ControlLogix 1756 platform, supporting Rockwell PLCs and PAC network protocols, as well as platforms and devices that use Siemens Industrial Ethernet and Modbus TCP protocols. |
ProSoft Technology Inc | Modbus TCP to BACnet Client Gateway, 5201-MNET-BACNET | Network Gateway: This stand-alone DIN-rail mounted protocol gateway provides a single Ethernet port. The Modbus TCP (MNET) driver can be used to interface many different protocols into the Schneider Electric Quantum family of processors as well other software solutions supporting the protocol. Supports both Client and Server connections.The ProLinx BACnet (Building Automation and Control networking) protocol version is designed specifically to meet the communication needs of building automation and control systems for applications such as heating, ventilating, and air-conditioning control, lighting control, access control, and fire detection systems with limited BACnet command support. |
ProSoft Technology Inc | ProLinx Family Ethernet/IP to Modbus Communication Modules 5202-DFNT-MCM4 | Network Gateway: The ProLinx family EtherNet/IP to Modbus Master/Slave communications module (5202-DFNT-MCM4) creates a powerful connection between devices on an EtherNet/IP network and Modbus devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one ethernet port and up to four serial ports. The Ethernet/IP (DFNT) protocol driver supports the Explicit Messaging implementation of the protocol. User-configurable as both a Client and a Server, the EtherNet/IP port is a very powerful data transfer tool. The Modbus (MCM) protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution. |
ProSoft Technology Inc | ProLinx DNP 3.0 Master to Modbus Master/Slave 5102-DNPM-MCM3 | Network Gateway: The ProLinx family DNP 3.0 Master to Modbus Master/Slave communications module (5102-DNPM-MCM3) creates a powerful connection between devices on a DNP network and Modbus devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides up to four serial ports. The DNP 3.0 Master protocol driver supports Master implementations of the protocol on one port. This port is fully configurable, providing a great deal of flexibility. The Modbus (MCM) protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution. |
ProSoft Technology Inc | ProLinx Modbus Master/Slave (3 ports) to DNP 3.0 Slave 5102-DNPS-MCM3 | Network Gateway: The ProLinx family DNP 3.0 Slave to Modbus Master/Slave communication module (5102-DNPS-MCM3) creates a powerful connection between devices on a Modbus network and a DNP master device. The module is a stand-alone DIN rail-mounted protocol gateway that provides one DNP 3.0 Slave configurable serial port, and three Modbus Master or Slave configurable serial ports. The DNP 3.0 Slave protocol driver supports Slave implementations of the protocol on one port. This port is fully configurable, providing a great deal of flexibility. |
ProSoft Technology Inc | ProLinx Modbus Master/Slave (4 ports) to DF1 Master/Slave (4 ports) 5102-MCM4-DFCM4 | Network Gateway: The ProLinx family Modbus Master/Slave to DF1 Master/Slave communications module (5102-MCM4-DFCM4) creates a powerful connection between Modbus Master/Slave and DF1 Master/Slave networks and devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides four serial ports, each individually configurable as a Modbus or DF1 Master or Slave. The Modbus (MCM) protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution. The DF1 (DFCM) protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable, providing a great deal of flexibility. |
ProSoft Technology Inc | ProLinx Modbus MasterSlave (3 ports) to Generic ASCII 5102-MCM-ASCII3 | Network Gateway: The ProLinx family Modbus Master/Slave to ASCII Generic Serial communications module (5102-MCM-ASCII3) creates a powerful connection between devices on a Modbus network and ASCII devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Modbus configurable serial port and three ASCII configurable serial ports. The Modbus (MCM) protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution. The ASCII protocol driver permits the module to interface too many ASCII devices. Each ASCII port on the module is configurable to send and/or receive ASCII strings, each supporting its own individual serial network. |
ProSoft Technology Inc | ProLinx Modbus TCP/IP to DNP 3.0 Slave Communication Gateway, 5201-MNET-DNPS | Network Gateway: The ProLinx family Modbus TCP/IP to DNP 3.0 Slave communications module (5201-MNET-DNPS) creates a powerful connection between devices on a Modbus network and DNP Slave devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one ethernet port and one serial port. The Modbus TCP/IP (MNET) driver can be used to interface many different protocols into the Schneider Electric Quantum family of processors as well other software solutions supporting the protocol. The MNET driver supports Client connections as well as Server connections. The DNP 3.0 Slave protocol driver supports Slave implementations of the protocol on one port. This port is fully configurable, providing a great deal of flexibility. |
ProSoft Technology Inc | ProLinx Modbus Master/Slave to PROFIBUS DP Master 5104-MCM-PDPM | Network Gateway: The ProLinx Modbus Master/Slave to PROFIBUS Master Gateway creates a powerful connection between devices on a Modbus network and a PROFIBUS DP Slave device. |
ProSoft Technology Inc | ProLinx Modbus Master/Slave to PROFIBUS DP Slave 5105-MCM-PDPS | Network Gateway: The ProLinx Modbus Master/Slave to PROFIBUS DP Slave Gateway creates a powerful connection between devices on a Modbus network and PROFIBUS DP master devices. |
ProSoft Technology Inc | Modbus Master/Slave to PROFIBUS DPV1 Master Gateway, 5104-MCM-PDPMV1 | Network Gateway: Supports both Master and Slave implementations. All Modbus serial ports are individually configurable, providing a choice of Modbus RTU or Modbus ASCII support. The PROFIBUS DPV1 Master protocol supports complete Master specifications according to IEC 61158 Version 1 on either a single or multiple Master network. The gateway offers both cyclic and acyclic data transfers from PROFIBUS DPV1 slaves, as well as cyclic data transfers from DPV0 slaves. |
ProSoft Technology Inc | ProLinx IEC 60870-5-104 Server to Modbus Master/Slave 5201/5202-104S-MCM (4) | Network Gateway: The ProLinx IEC60870-5-104 Server to Modbus Master/Slave Gateway creates a powerful connection between devices on a Modbus network and an IEC 104 client device. |
ProSoft Technology Inc | ProLinx Modbus TCP/IP to IEC60870-5-101 Slave 5201-MNET-101S | Network Gateway: The ProLinx Modbus TCP/IP to IEC60870-5-101 Slave Gateway creates a powerful connection between devices on a Modbus TCP/IP network and an IEC 101 master device. |
ProSoft Technology Inc | Modbus TCP to HART Analog Gateway (8 Chan), 5228-MNET-HART | Network Gateway: The gateway works well for field applications where it can be installed closer to HART instrument, saving on copper cable and installation costs. It also saves rack space for other in-chassis options. Provides extremely fast channel update times (all channels updating simultaneously in 67 ms) making the HART Analog Input Gateway ideal for applications where high speeds and point-to-point connectivity are required. Available in 4 and 8 Analog input channel options. |
ProSoft Technology Inc | Modbus TCP to 'C' Programmable Serial, 4 Port, 5202-MNET-ADM4 | Network Gateway: The Modbus TCP (MNET) driver can be used to interface many different protocols into the Schneider Electric Quantum family of processors as well other software solutions supporting the protocol; Supports both Client and Server connections; The ADM functionality allows the module to be programmed to accommodate devices with unique serial protocols. The module includes General Software Embedded DOS 6-XL, which provides DOS compatibility and real-time multitasking functionality. Developers can use standard DOS tools, such as DigitalMars C++ and Borland compilers. |
ProSoft Technology Inc | ProLinx Modbus TCP/IP Multi-Client to Ethernet/IP 5201-MNET-DFNT | Network Gateway: The ProLinx Modbus TCP/IP Multi Client to EtherNet/IP Gateway creates a powerful connection between Modbus TCP/IP and EtherNet/IP networks. |
ProSoft Technology Inc | Modbus Master/Slave to 'C' Programmable Application Development Module, 5102-MCM4-ADM4 | Network Gateway: The Modbus protocol driver supports both Master and Slave implementations. All Modbus serial ports are individually configurable, providing a powerful and flexible host or device interface solution. ADM functionality allows the module to accommodate devices with unique serial protocols. The module includes General Software Embedded DOS 6-XL. This provides DOS compatibility along with real-time multitasking functionality. DOS compatibility allows user applications to be developed using standard DOS tools, such as DigitalMars and Borland compilers. |
ProSoft Technology Inc | ProLinx Modbus TCP/IP to DNP 3.0 Master 5201-MNET-DNPM | Network Gateway: The ProLinx Modbus TCP/IP to DNP 3.0 Master Gateway creates a powerful connection between devices on a Modbus TCP/IP network and DNP slave devices. |
ProSoft Technology Inc | Modbus TCP to IEC 61850 Gateway, PLX8X-MNET-61850 | Network Gateway: The ProLinx® Modbus TCP to IEC 61850 gateway enables communication between the Intelligent Electronic Devices (IEDs) on an IEC-61850 network and Programmable Logic Controllers (PLCs) or Programmable Automation Controllers (PACs) on a Modbus TCP network. |
ProSoft Technology Inc | ProLinx Modbus TCP/IP to PROFIBUS DP Master V1 5204-MNET-PDPMV1 | Network Gateway: The ProLinx Modbus TCP/IP to PROFIBUS DP Master Gateway creates a powerful connection between devices on a Modbus TCP/IP network and a PROFIBUS slave device. |
ProSoft Technology Inc | ProLinx Modbus TCP/IP to PROFIBUS DP Slave 5205-MNET-PDPS | Network Gateway: The ProLinx Modbus TCP/IP to PROFIBUS DP Slave Gateway creates a powerful connection between devices on a Modbus TCP network and a PROFIBUS DP Master device. |
ProSoft Technology Inc | C' Programmable over Ethernet to Modbus Master/Slave Gateway 4 Port, 5202-ADMNET-MCM4 | Network Gateway: The ADMNET-MCM module is a solution for many applications where Ethernet and serial connectivity need to be added to a Modbus Master/Slave platform. The ADM API Suite is allows software developers access to the top layer of the serial ports. The ADMNET API suite accesses the Ethernet port. |
ProSoft Technology Inc | ProLinx Modbus TCP/IP to HART Multidrop - 4 Channel 5207-MNET-HART | Network Gateway: The ProLinx Modbus TCP/IP to HART Multi-drop Gateway creates a powerful connection between devices on an EtherNet/IP network and HART Multi-drop devices. |
ProSoft Technology Inc | Modbus TCP/IP for SLC platform Client Only MVI46-MNETC | I/O Interface: The MVI46 Modbus TCP/IP Client Communication Module is designed to allow SLC processors to interface easily with other Modbus TCP protocol-compatible devices. |
ProSoft Technology Inc | Modbus TCP to LonWorks QuickServer Gateways, PS-QS-1X11-0154 | Network Gateway: System integrators worldwide benefit from the value of interoperability gateways offered by FieldServer. QuickServer adds value by running the same robust FieldServer protocol conversion software on a cost-effective platform backed by ProSoft Technology. |
ProSoft Technology Inc | Modbus TCP/IP for CompactLogix MVI69-MNET | I/O Interface: The inRAx Modbus TCP/IP Communication Module is designed to allow CompactLogix processors to interface easily with other Modbus TCP protocol-compatible devices. |
ProSoft Technology Inc | Modbus TCP/IP for CompactLogix Client Only MVI69-MNETC | I/O Interface: The MVI69 Modbus TCP/IP Client Communication Module is designed to allow CompactLogix I/O compatible processors to interface easily with other Modbus TCP protocol-compatible devices. |
ProSoft Technology Inc | Modbus Master/Slave for FLEX MVI94-MCM-MHI | I/O Interface: The MVI94 Modbus Master/Slave Communication Module allows Rockwell Automation FLEX processors to interface easily with other Modbus protocol compatible devices. |
ProSoft Technology Inc | Modbus TCP to PROFIBUS DP Slave Gateway, 5205-MNET-PDPS | Network Gateway: This stand-alone DIN-rail mounted protocol gateway provides a single Ethernet port and a single DB9F PROFIBUS port. The Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other solutions supporting the protocol. The MNET driver supports both Client and Server connections; When coupled with the Web option provides a web/ftp interface; The PROFIBUS DP Slave protocol driver supports the PROFIBUS V0 Slave implementation, providing data transfer capability between the ProLinx module and Siemens PLCs or other hosts. User configurable data mapping and DP port operation make the interface an easy to use and powerful data transfer tool. |
ProSoft Technology Inc | Modbus TCP to BACnet MS/TP or BACnet/IP QuickServer Gateways, PS-QS-1x10-0757 | Network Gateway: System integrators worldwide benefit from the value of interoperability gateways offered by FieldServer. QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a cost-effective platform backed by ProSoft Technology. |
ProSoft Technology Inc | Modbus TCP to HART Analog Gateway (4 Chan), 5208-MNET-HART | Network Gateway: This gateway works well for field applications where it can be installed closer to the HART instrument, saving on copper cable and installation costs. The gateway also saves valuable rack space for other in-chassis options. The gateways provide fast channel update times (all channels updating simultaneously in 67 ms) making the HART Analog Input Gateway ideal for applications where high speeds and point-to-point connectivity are required. These gateways are available in 4 and 8 Analog input channel options. |
ProSoft Technology Inc | Modbus Serial Module for CompactLogix L1 and Point I/O Adapters, ILX34-MBS485 | I/O Interface: The module can be used in CompactLogix L1 processors or Distributed 1734 Point I/O systems; Configured as a Master or Slave. |
ProSoft Technology Inc | Modbus TCP Lite Communication Module for CompactLogix, MVI69L-MBTCP | I/O Interface: With an Add-on Profile and an Add-on Instruction to reduce commissioning time, the MVI69L-MBTCP has a single Ethernet port for diagnostic and application data. Supports both Client and Server connectivity to interface with a variety of devices using Modbus TCP |
ProSoft Technology Inc | IEC 60870-5-104 Server to Modbus Master/Slave 4 Port, 5202-104S-MCM4 | Network Gateway: Stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port and up to four serial ports. The 104S module accepts commands from an attached master unit on the network and generates unsolicited messages. The Modbus (MCM) protocol driver supports both Master and Slave implementations. Modbus serial ports are individually configurable, providing a powerful and flexible host or device interface solution. |
ProSoft Technology Inc | IEC 60870-5-104 Server to Modbus Master/Slave, 5201-104S-MCM | Network Gateway: A stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port and up to four serial ports, the 104S module accepts commands from an attached master unit on the network and generates unsolicited messages. Supports Master and Slave implementations. All Modbus serial ports are individually configurable, providing a powerful and flexible host or device interface solution. |
ProSoft Technology Inc | Modbus Serial Port Expander, 5102-MBS3-MBM | Network Gateway: Designed to act as a multiplexer, allowing simultaneous connections from multiple Modbus masters to a single Modbus slave. A common use for the module is to have an HMI panel and a SCADA application all communicating to the same Modbus slave port of a Modicon processor. |
ProSoft Technology Inc | Modbus TCP to GE Ethernet Global Data Gateway, 5201-MNET-EGD | Network Gateway: With one Ethernet port, the Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other solutions supporting the protocol. Supports both Client and Server connections, and when coupled with the Web option provides a web/ftp interface. The EGD modules offer one-to-one or one-to-many interconnect scenarios. Data is exchanged between devices and/or networks using a shared common database and an efficient but powerful wireless protocol. This common database provides the 'backbone' communications for various field devices using different networks. |
ProSoft Technology Inc | Modbus TCP Multi Client Enhanced Network Interface Module with Reduced Data Block for ControlLogix, MVI56E-MNETCR | I/O Interface: Improves performance when controlling multiple servers on a Modbus TCP network, by supporting up to 30 clients. MVI56E enhancements include configuration and management through the module Ethernet port, CIPconnect technology for bridging through ControlNet and EtherNet/IP networks, and has a web server to access on-board documentation, Add-On Instructions, and sample program files. Uses a small I/O data image for transfer of data between the module and the ControlLogix processor, making it ideal for ControlNet or Ethernet applications with the module in a remote rack. |
ProSoft Technology Inc | Modbus TCP Multi Client/Server Enhanced Network Interface Module for ControlLogix, MVI56E-MNETC | I/O Interface: Improves performance when controlling multiple servers on a Modbus TCP network, by supporting up to 30 Clients. Also supports up to 20 server connections (10MNET, 10 MBAP). MVI56E enhancements include configuration and management through the module?s Ethernet port, and CIPconnect technology for bridging though ControlNet? and EtherNet/IP? networks. |
ProSoft Technology Inc | Modbus Master/Slave Enhanced Network Interface Module for ControlLogix, MVI56E-MCM/MCMXT | I/O Interface: The MVI56E-MCM and MVI56E-MCMXT act as input/output modules on the ControlLogix backplane, making Modbus data appear as I/O data to the processor. Two independently configurable serial ports can operate on the same or different Modbus networks. The MVI56E-MCM is designed for standard process applications and the MVI56E-MCMXT is designed for the Logix-XT? control platform, allowing it to operate in extreme environments. Can tolerate higher operating temps, and has conformal coating for protection in harsh or caustic conditions. |
ProSoft Technology Inc | EtherNet/IP to Modbus TCP, PLX31-EIP-MBTCP | Network Gateway: Stand-alone DIN-rail mounted modules that provide one Ethernet port for communication, allowing for remote configuration and diagnostics. The PLX30 gateways also come with an SD Card slot (SD card optional) for storing configuration files. In the event of a failure the SD card can be transferred to another gateway reducing downtime. These gateways also come with a wide input power range (10 Vdc to 36 Vdc), and an extended temp range (-25°C to 70°C ). Includes all necessary cables required for communication. |
ProSoft Technology Inc | Modbus TCP to Modbus Serial Communication Module, PLX31-MBTCP-MBS4 | Network Gateway: PLX31-MBTCP-MBS gateways are stand-alone DIN-rail mounted modules that provide one Ethernet port for communication, allowing for remote configuration and diagnostics, and one serial communication port. The PLX30 gateways also come with an SD Card slot (SD card optional) for storing configuration files. In the event of a failure the SD card can be transferred to another gateway reducing downtime. These gateways come with a wide input power range (10 Vdc to 36 Vdc), and an extended temp range (-25°C to 70°C ), and include all the necessary cables required for communication. |
ProSoft Technology Inc | Modbus TCP to Siemens Industrial Ethernet Gateway, PLX31-MBTCP-SIE | Network Gateway: The PLX31-MBTCP-SIE gateways are stand-alone DIN-rail mounted modules that provide one Ethernet port for communication, allowing for remote configuration and diagnostics. PLX30 gateways also come with an SD Card slot (optional) for storing configuration files. In the event of a failure the SD card can be transferred to another gateway reducing downtime. These gateways also come with a wide input power range (10 Vdc ? 36 Vdc), and an extended temperature range (-25°C to 70°C ), and include all the necessary cables required for communication. |
ProSoft Technology Inc | Modbus RTU/ASCII Master/Slave Communication Module, PTQ-MCM | I/O Interface: Provides a way for users of the Schneider Electric Quantum processor to add two Modbus serial ports to the control platform. The module acts as an Options module for the Quantum platform allowing communication on a Modbus serial network. Compatible devices include Modicon® PLCs (almost all support the Modbus protocol) and a wide range of process and control devices from a variety of manufacturers. |
ProSoft Technology Inc | Modbus Master/Slave Enhanced Network Interface Module with Reduced Data Block for ControlLogix, MVI56E-MCMR | I/O Interface: The Reduced Data Block implementation requires less backplane/network bandwidth; the smaller data blocks are easier to schedule and transfer on ControlNet networks. An ideal solution for remote chassis installations. The MVI56E-MCM and the MVI56E-MCMXT act as I/O modules on the ControlLogix backplane. Two independently-configurable serial ports can operate on the same or different Modbus networks. Each port can be configured as a Modbus master or slave, sharing the same user-controlled 5000-word database. |
ProSoft Technology Inc | DeviceNet to Modbus Gateway, 1782-JDM | Network Gateway: These gateways function as a DeviceNet adapter and support connection to a wide variety of serial Modbus devices through an RS-485, RS-232 or RS-422 port. The gateway is a general-purpose interface that enables exchanges of data between a PAC or PLC and Modbus slave devices through the DeviceNet scanner. All Modbus slave responses are passed without changing any data, which enables these gateways to be used in a wide variety of applications. |
ProSoft Technology Inc | Modbus Serial Enhanced Communication Module, MVI69E-MBS | I/O Interface: This module comes with an Add-on Profile and an Add-on Instruction to reduce commissioning time. The MVI69E-MBS has two serial ports and supports both Master and Slave connectivity to interface with a variety of devices using the Modbus Protocol. |
ProSoft Technology Inc | Modbus TCP Enhanced Communication Module, MVI69E-MBTCP | I/O Interface: The MVI69E-MBTCP comes with an Add-on Profile and an Add-on Instruction to reduce commissioning time. It has a single Ethernet port for diagnostic and application data. The module supports both Client and Server connectivity to interface with a variety of devices using the Modbus Protocol. |
ProSoft Technology Inc | Modbus Serial Lite Communication Module for CompactLogix, MVI69L-MBS | I/O Interface: MVI69L-MBS has an Add-on Profile and an Add-on Instruction to reduce commissioning time. The MVI69L-MBS has a single serial port and can support either Master or Slave connectivity to interface with a variety of devices using the Modbus Protocol. |
ProSoft Technology Inc | Modbus TCP to ASCII Generic Serial 4 port, 5202-MNET-ASCII4 | Network Gateway: The 5202-MNET-ASCII4 stand-alone DIN-rail mounted gateway provides one Ethernet port and up to four ASCII configurable serial ports. The Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors and other devices supporting the protocol. Supports both Client and Server connections, and when coupled with the Web option provides a web/ftp interface also. The ASCII protocol driver permits the module to interface to many ASCII devices. Each ASCII port on the module is configurable to send and/or receive ASCII strings, each supporting its own individual serial network. |
ProSoft Technology Inc | DNP over Ethernet to Modbus Master/Slave 4 port, 5201/5202-DNPSNET-MCM(4) | Network Gateway: The DNPSNET-MCM stand-alone DIN-rail mounted protocol gateways provide one Ethernet port and up to four serial ports. Supports the DNP 3.0 protocol as a server using the TCP and UDP protocols using service port 20000. This port is fully configurable. The Modbus protocol driver supports Master and Slave implementations. All Modbus serial ports are individually configurable, providing a powerful and flexible host or device interface solution. |
ProSoft Technology Inc | Modbus TCP to DF1 Master/Slave Gateway, 5201-MNET-DFCM and 5202-MNET-DFCM4 | Network Gateway: The MNET-DFCM(4) DIN-rail mounted protocol gateways provide one Ethernet port and up to four serial ports. The Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors and other devices supporting the protocol. Supports both Client and Server connections, and when coupled with the Web option provides a web/ftp interface also. The DF1 protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable. |
ProSoft Technology Inc | Modbus TCP to JCI Metasys N2 QuickServer Gateways, PS-QS-1x10-0117 | Network Gateway: System integrators world-wide benefit from the value of the powerful line of interoperability gateways offered by FieldServer. Now, QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a cost-effective platform backed by ProSoft Technology. |
Real Time Automation | Exlink PCB Gateway, 6102-EX | Network Gateway: With a high-speed TTL serial interface (230 Kbps), extremely small footprint and high performance 10/100 Mb network interface, the 6102-EX Ethernet board level gateway is a great option for quickly adding EtherNet/IP and Modbus TCP communications to your standard product line. Based on a very powerful 55-Mhz ARM7TDMI RISC core, the 6102 is a simple, powerful and cost-effective solution for Ethernet networking. |
Real Time Automation | Modbus RTU Slaves to DeviceNet Slave, 460 MMDM | Network Gateway: The 460MMDM moves Registers and Coils between up to 32 Modbus RTU Slaves and a network of up to 32 DeviceNet Slaves. It's the perfect tool to get your Modbus RTU Slave data connected to your DeviceNet Slave devices. |
Real Time Automation | Modbus RTU Slave to BACnet/IP Client Gateway, 460MMBS | Network Gateway: The 460MMBS moves data between up to 32 Modbus RTU Slave devices and a BACnet/IP Client. Directly map Modbus RTU register and coil data to BACnet/IP network. |
Real Time Automation | Modbus RTU Slave to DeviceNet Master Gateway, 460MMDS | Network Gateway: The 460MMDS moves Registers and Coils between up to 32 Modbus RTU Slaves and a DeviceNet Master. It?s the perfect tool to get your Modbus RTU Slave data connected to your DeviceNet Master. |
Real Time Automation | Modbus RTU Slave to ASCII Device Gateway, 460MMA | Network Gateway: The 460MMA moves data between up to 32 Modbus RTU Slave devices and an ASCII device. Directly map Modbus RTU Register and Coil data to an ASCII device. |
Real Time Automation | Modbus RTU Slave to Allen-Bradley PLC Gateway, 460ETCMM | Network Gateway: The 460ETCMM moves data between up to 32 Modbus RTU Slave devices and up to 5 different Allen-Bradley PLC's. Directly map Modbus RTU Slave data and user defined Tags or Registers in the data table of your Allen-Bradley PLC. |
Real Time Automation | Modbus RTU Slave to Ethernet TCP/IP Gateway, 460MMTCP | Network Gateway: The 460MMTCP moves data between up to 32 Modbus RTU Slave devices and an ASCII device. Directly map Modbus RTU Register and Coil data to an Ethernet TCP/IP device. |
Real Time Automation | Modbus RTU Slave to BACnet MS/TP Gateway, 460MMBMS | Network Gateway: The 460MMBMS moves data between up to 32 Modbus RTU Slaves and a BACnet MS/TP Building Automation System (BAS). It's a perfect tool to tie Modbus power meters, boilers, chiller and other devices into your BACnet MS/TP Building Automation System. |
Real Time Automation | Modbus RTU Router to ASCII and TCP/IP Device, BFR3000 | Network Gateway: The easiest way to move Modbus Registers and Coils between Modbus TCP and Modbus RTU Network Devices. The BFR3000 offers transparent data transfer between Modbus devices and controllers on different physical layers. The BFR3000 has three operating modes for moving data between Modbus Networks. |
Real Time Automation | Modbus RTU Slave to EtherNet/IP Scanner Gateway, 460ESMM | Network Gateway: The 460ESMM connects up to 32 Modbus RTU slaves to an EtherNet/IP controller. It's the perfect tool to save legacy Modbus RTU devices from the scrap pile and give you the ability to use the huge variety of Modbus RTU devices available in your EtherNet/IP Architectures. |
Real Time Automation | DeviceNet Slave to a Modbus RTU Master Gateway, 460MRSDM | Network Gateway: The 460MRSDM moves data between up to 32 DeviceNet Slave devices and a Modbus RTU Master. Directly map DeviceNet data to registers and coils in a Modbus RTU Master. |
Real Time Automation | Modbus RTU Master to an EtherNet/IP Scanner Gateway, 460ESMRS | Network Gateway: The 460ESMRS moves data between a Modbus RTU Master and an EtherNet/IP Scanner. Directly map Modbus RTU Register and Coil data to an EtherNet/IP Scanner |
Real Time Automation | Modbus RTU Master to a BACnet/IP Client Gateway, 460MRSBS | Network Gateway: The 460MRSBS moves data between a Modbus RTU Master device and a BACnet/IP Building Management System (BMS). |
Real Time Automation | Modbus RTU Master to a Modbus TCP/IP Client Gateway, 460MSMRS | Network Gateway: The 460MSMRS moves data between a Modbus RTU Master and a Modbus TCP Client. Directly map Modbus RTU Register and Coil data to a Modbus TCP Client. |
Real Time Automation | Modbus RTU Master to ASCII Gateway, 460MRSA | Network Gateway: The 460MRSA moves data between a Modbus RTU Master and your ASCII device. Directly map ASCII data to a Modbus RTU Master. |
Real Time Automation | Modbus RTU Master to EtherNet/IP Adapter Gateway, 460ECMRS | Network Gateway: The 460ECMRS moves data between a Modbus RTU Master and an EtherNet/IP Adapter. Directly map Modbus RTU Register and Coil data to an EtherNet/IP Adapter. |
Real Time Automation | Modbus RTU Master to DeviceNet Master Gateway, 460MRSDS | Network Gateway: The 460MRSDS moves data between a Modbus RTU Master and a DeviceNet Master. Directly map Modbus RTU Register and Coil data to a DeviceNet Master. |
Real Time Automation | Modbus RTU Master to Ethernet TCP/IP Gateway, 460MRSTCP | Network Gateway: The 460MRSTCP moves data between up to 10 Ethernet TCP/IP devices and a Modbus RTU Master. Directly map Ethernet TCP/IP data to Registers and Coils in a Modbus RTU Master. |
Real Time Automation | Modbus RTU Master to Allen-Bradley PLC Gateway, 460ETCMRS | Network Gateway: The 460ETCMRS moves data between a Modbus RTU Master and an Allen-Bradley PLC. Directly map Modbus RTU data and user-defined Tags or Registers in the data table of your Allen-Bradley PLC. |
Real Time Automation | Modbus TCP/IP Server to BACnet/IP Client Gateway, 460MCBS | Network Gateway: The 460MCBS moves data between up to 32 Modbus TCP Server devices and a BACnet/IP Client. Directly map Modbus TCP Register and Coil data to a BACnet/IP Client. |
Real Time Automation | Modbus TCP/IP Server to EtherNet/IP Scanner, 460ESMC | Network Gateway: The 460ESMC moves data between up to 32 Modbus TCP Servers and an EtherNet/IP Scanner. Directly map Modbus TCP Register and Coil data to an EtherNet/IP Scanner. |
Real Time Automation | Modbus TCP/IP Server to ASCII Gateway, 460MCA | : The 460MCA moves data between up to 32 Modbus RTU Slave devices and an ASCII device. Directly map Modbus TCP Register and Coil data to an ASCII device. |
Real Time Automation | Modbus TCP/IP Server to Allen-Bradley PLC Gateway, 460ETCMC | Network Gateway: The 460ETCMC moves data between up to 31 Modbus TCP Server devices and an Allen-Bradley PLC. Directly map Modbus TCP data and user-defined Tags or Registers in the data table of an Allen-Bradley PLC. |
Real Time Automation | Modbus TCP/IP Server to DeviceNet Master Gateway, 460MCDS | Network Gateway: The 460MCDS moves data between up to 32 Modbus TCP Server devices and a DeviceNet Master. Directly map Modbus TCP Register and Coil data to a DeviceNet network. |
Real Time Automation | Modbus TCP/IP Server to BACnet MS/TP Master Gateway, 460MCBMS | Network Gateway: The 460MCBMS moves data between up to 32 Modbus TCP Server devices and a BACnet MS/TP Master. Directly map Modbus TCP Register and Coil data to BACnet MS/TP network |
Real Time Automation | Modbus TCP/IP Client to ASCII Gateway, 460MSA | Network Gateway: The 460MSA moves data between a Modbus TCP/IP Client and an ASCII device. Directly map ASCII data to a Modbus TCP Client |
Real Time Automation | DeviceNet Slave to Modbus TCP/IP Client Gateway, 460MSDM | Network Gateway: The 460MSDM moves data between up to 32 DeviceNet Slave devices and a Modbus TCP Client. Directly map DeviceNet data to Registers and Coils in a Modbus TCP Client |
Real Time Automation | Modbus TCP/IP Client to BACnet/IP Client Gateway, 460MSBS | Network Gateway: The 460MSBS moves data between a Modbus TCP Client and a BACnet/IP Client. Directly map Modbus RTU Register and Coil data to a BACnet/IP Client |
Real Time Automation | Modbus TCP/IP Client to EtherNet/IP Adapter Gateway, 460ECMS | Network Gateway: The 460ECMS moves data between up to 32 EtherNet/IP and a Modbus TCP Client. Modbus is still the catch all protocol. It's simple and been around forever, which means there is huge base of users and legacy systems supporting Modbus. With the 460ECMS you now have a great tool to integrate newer EtherNet/IP devices into these systems. |
Real Time Automation | Modbus TCP/IP Client to Ethernet TCP/IP Gateway, 460MSTCP | Network Gateway: The 460MSTCP moves data between up to 10 Ethernet TCP/IP devices and a Modbus TCP Client. Directly maps Ethernet TCP/IP data to registers and coils in a Modbus TCP Client |
Real Time Automation | Modbus TCP/IP Client to DeviceNet Master Gateway, 460MSDS | Network Gateway: The 460MSDS moves data between a Modbus TCP Client and a DeviceNet Master. Directly maps Modbus TCP register and coil data to a DeviceNet Master |
Real Time Automation | Modbus TCP/IP Client to Allen-Bradley PLC Gateway, 460ETCMS | Network Gateway: The 460ETCMS moves data between a Modbus TCP Client and an Allen-Bradley PLC. Directly maps Modbus TCP data and user defined Tags or Registers in the data table of your Allen-Bradley PLC |
Real Time Automation | Modbus TCP Client to EtherNet/IP Scanner Gateway, 460ESMS | Network Gateway: The 460ESMS moves data between a Modbus TCP Client and an EtherNet/IP Scanner. Directly map Modbus TCP Register and Coil data to an EtherNet/IP Scanner |
Real Time Automation | Modbus RTU Server to Profinet IO Controller Gateway, 460PSMM | Network Gateway: The 460PSMM moves data between up to 32 Modbus RTU Server devices and a Profinet IO Controller. With the 460PSMM you make a direct connection between Modbus RTU Server data and user defined Slots in your Profinet IO Controller. The 460PSMM provides an option to access Modbus RTU Server devices without having to upgrade your PLC or get an expensive in rack solution. |
Real Time Automation | Modbus RTU Server to Profibus DP Master Gateway, 460MMPBS | Network Gateway: The 460MMPBS moves data between up to 32 Modbus RTU Server devices and a Profibus DP enabled PLC. With the 460MMPBS you are making a direct connection between Modbus RTU Server data and user defined Slots in your Profibus DP PLC. The 460MMPBS provides an option to access Modbus RTU Server devices without having to upgrade your PLC or get an expensive in rack solution. |
Real Time Automation | Modbus RTU Client to Profinet IO Controller Gateway, 460PSMRS | Network Gateway: The 460PSMRS moves data between a Modbus RTU Client device and a Profinet IO Controller. With the 460PSMRS you are making a direct connection between Modbus RTU Client Register and Coil data and user defined Slots in your Profinet IO Controller. The 460PSMRS provides an option to access your Modbus RTU Client device without having to upgrade your PLC or get an expensive in rack solution. |
Real Time Automation | Modbus TCP Server to Profinet IO Controller Gateway, 460PSMC | Network Gateway: The 460PSMC moves data between up to 32 Modbus TCP/IP Server devices and a Profinet IO Controller. With the 460PSMC you are making a direct connection between Modbus TCP/IP Server data and user defined Slots in your Profinet IO Controller. The 460PSMC provides an option to access Modbus TCP/IP Server devices without having to upgrade your PLC or get an expensive in rack solution. |
Real Time Automation | Modbus TCP Client to Profinet IO Controller Gateway, 460PSMS | Network Gateway: The 460PSMS moves data between a Modbus TCP/IP Client device and a Profinet IO Controller. With the 460PSMS you are making a direct connection between Modbus TCP/IP Client Register and Coil data and user defined Slots in your Profinet IO Controller. The 460PSMS provides an option to access a Modbus TCP/IP Client device without having to upgrade your PLC or get an expensive in rack solution. |
Real Time Automation | Modbus RTU Master to BACnet/IP Server, 460 MRSBC | Network Gateway: The 460MRSBC moves data between a Modbus RTU Master device and up to 32 BACnet/IP Server devices. The 460MRSBC module bundles your BACnet/IP data and makes it available as Modbus RTU data. The module provides complete Modbus RTU Slave and BACnet/IP Client capability. |
Real Time Automation | Modbus RTU Master to BACnet MS/TP Master, 460 MRSBMS | Network Gateway: The 460MRSBMS moves data between a Modbus RTU master and a BACnet MS/TP Building Automation System (BAS). It?s a perfect tool to get your Modbus RTU data tied in with your BACnet MS/TP Building Automation System. |
Real Time Automation | Modbus RTU Master to BACnet MS/TP Slaves, 460 MRSBM | Network Gateway: The 460MRSBM moves data between a Modbus RTU Master device and up to 32 BACnet MS/TP Slave devices. With the 460MRSBM you're mapping BACnet MS/TP as Binary and Analog values directly to your Modbus RTU Master. |
Real Time Automation | Modbus TCP to BACnet/IP Server, 460 MCBC | Network Gateway: The 460MCBC moves data between up to 32 Modbus TCP Servers and up to 32 BACnet/IP Servers. It's a perfect tool to move data between your Modbus power meters, boilers, chiller and other Server devices and your BACnet/P Server devices. |
Real Time Automation | Modbus TCP Server to Modbus RTU Slave, 460 MCMM | Network Gateway: The 460MCMM moves data between up to 32 Modbus TCP Server devices and up to 32 Modbus RTU Slave devices. With the 460MCMM register and coil data can be freely moved between your Modbus RTU and Modbus TCP networks. |
Real Time Automation | Modbus TCP Server to Profibus DP Controller, 460 MCPBS | Network Gateway: The 460MCPBS moves data between up to 32 Modbus TCP Server devices and a Profibus DP enabled PLC. It's the perfect tool to utilize the plethora of cost-effective Modbus TCP devices in your Profibus architecture. |
Real Time Automation | Modbus TCP Server to DeviceNet Slaves, 460 MCDM | Network Gateway: The 460MCDM moves data between a network of up to 32 Modbus TCP Server devices and up to 32 DeviceNet Slaves. It's the perfect tool to tie all of your Modbus TCP devices into your DeviceNet network. |
Real Time Automation | Modbus TCP Server to Ethernet TCP/IP, 460 MCTCP | Network Gateway: The 460MCTCP moves data between up to 32 Modbus TCP Servers and an Ethernet TCP/IP device. With the 460MCTCP you have a tool to help you map Modbus TCP device data into an Ethernet TCP/IP application. You can also capture Ethernet TCP/IP commands and write them to your Modbus TCP Server devices. |
Real Time Automation | Modbus TCP Client to Modbus RTU Master, 460 MSMRS | Network Gateway: The 460MSMRS moves data between a Modbus TCP Client device and a Modbus RTU Master device. Data can be freely moved between your Modbus RTU and Modbus TCP controllers. |
Real Time Automation | Modbus TCP Client to BACnet/IP Servers, 460 MSBC | Network Gateway: The 460MSBC moves data between a network of up to 32 BACnet/IP Server devices and a Modbus TCP Client. It?s a perfect tool to get your Modbus TCP data tied in with your BACnet/IP devices. |
Real Time Automation | TCP Client to BACnet MS/TP Master, 460 MSBMS | Network Gateway: The 460MSBMS moves data between a Modbus TCP Client and a BACnet MS/TP Building Automation System (BAS). It's a perfect tool to get your Modbus TCP data tied in with your BACnet MS/TP Building Automation System. |
Real Time Automation | Modbus TCP Client to BACnet MS/TP Slave, 460 MSBM | Network Gateway: The 460MSBM moves data between a network of up to 32 BACnet MS/TP Slave devices and a Modbus TCP Client. It's a perfect tool to get your Modbus TCP data tied in with your BACnet MS/TP devices. |
SAUTER | modu524/525+721 | Controller: The modu524/525 automation stations (AS) are used to regulate, control, monitor and optimise operational installations. They are based entirely on BACnet/IP communication. A web server (modu-Web) is integrated into the AS for comprehensive operation, direct visualisation of the data points, notification and forwarding of alarms and creation of time profiles (scheduler). The moduCom communication module modu721 is used to extend the modu524 and modu525 automation stations. It is used to integrate third-party products on the automation level in operational systems such as HVAC engineering. Third-party products based on the field bus protocols for EIA-232 or EIA-485 such as Modbus/RTU, M-Bus can be integrated in the automation station. This allows for the option of BACnet/IP communication with the management level. |
SAUTER | ecos504/505 | Controller: The ecos 5 system family comprises a range of devices for room automation for the BACnet/IP system bus. The ecos504/505 room automation station (AS) is a modular, freely programmable BACnet Building Controller (B-BC) for the automation of up to eight rooms or flexible room segments with the functions room climate, lighting and sunshading. The ecos504/505 as BACnet Building Controller (B-BC) can also be used as an individual AS for otherfunctions in building automation (ventilation system unit, decentral data preparation for devices on a BACnet MS/TP line, central control of multiple VAV boxes etc.). The powerful programming environment, SAUTER CASE Suite, and the available function libraries allow both standard tasks of room automation and complex projects with flexible room division, based on room segments, to be carried out efficiently. Room operating units of the ecoUnit series, remote ecoLink I/O modules and two EnOcean ecoMod580 wireless interfaces are connected to the ecos504/505 via RS-485 interfaces. A half-duplex, 2-wire, electrically isolated RS-485 interface (variant F0C1) with the Modbus protocol as master (Modbus/RTU and Modbus/ASCII) enables the integration of up to 247 Modbus devices (Modbus slaves) such as multi-sensors, room operating units, energy meters (electricity, heat), intelligent actuators, communicative controllers etc. |
Schneider Electric SA | Altivar Speed Drives, ATV31 ... | AC/DC Drive Control: The Altivar 31 drive is a frequency inverter for 3-phase squirrel cage asynchronous motors. The Altivar 31 is robust, compact, easy to use and conforms to EN 50178, IEC/EN 61800-2, IEC/EN 61800-3 standards, UL/CSA certification and to CE marking. It incorporates functions that are suitable for the most common applications, including materials handling (small conveyors, hoists, etc), packing and packaging machines, specialist machines (mixers, kneaders, textile machines, etc.), pumps, compressors, fans. 200 V to 240 V single phase; 0.18 kW to 2.2 kW; 380 V to 500 V 3-phase, 0.37 kW to 15 kW; 525 V to 600 V 3-phase, 0.75 kW to 15 kW. |
Schneider Electric SA | Altivar Speed Drives, ATV38 ... | AC/DC Drive Control: The Altivar 38 is a frequency inverter for three-phase asynchronous motors powered by a three-phase supply 380 V ? 10% to 460 V + 10% or 480 V + 5% in the power range 0.75 kWto 315 kW. The Altivar 38 has been designed for state-of-the-art applications in heating, ventilation and air conditioning (HVAC) in industrial and commercial buildings: ventilation, air conditioning, pumping. The Altivar 38 can reduce operating costs in buildings by optimizing energy consumption while improving user comfort. Its numerous integrated options enable it to be adapted to and incorporated into electrical installations and sophisticated control systems. The need for electromagnetic compatibility was taken into account at the outset of designing the drive. Depending on the drive rating, filters and chokes are either built-in or available as optional accessories. |
Schneider Electric SA | Altivar Speed Drives, ATV 68 ... | AC/DC Drive Control: The ATV 68 is a compact and robust speed drive for all types of high-power 3-phase asynchronous motors. The Altivar 68 incorporates the latest technological developments and its innovative functions meet the requirements of the most common applications, notably: ventilation, air-conditioning, pumping, conveying, grinding, handling and lifting. The Altivar 68 has several application-specific preset configurations with few basic parameters that can be modified using the programming terminal to create additional functions. It covers a range from 75 to 500 kW for high-torque applications and from 90 to 630 kW for standard-torque applications for a single voltage range from 400 to 500 V. In spite of its high performance, it is easy to adjust. The introduction of elements on the motor rating plate and autotuning on stopping make it possible to obtain high torque together with remarkable drive quality, even at very low rotation speeds (< 0.5 Hz). |
Schneider Electric SA | Altivar Speed Drives, ATV 71H | AC/DC Drive Control: The Altivar 71 is a new frequency inverter for three-phase squirrel cage asynchronous motors that incorporates the latest technological developments and functions suitable for the most common applications, including horizontal and vertical materials handling, packing/packaging, special machines, ventilation/air conditioning, pumps and compressors. Its numerous integrated options enable it to be adapted to sophisticated and advanced control systems. For applications in which only a small amount of overtorque is required, drives with power ratings from 0.37 kw to 500 kw. |
Schneider Electric SA | Inductel Inductive Identification System, XGK-S1715503 | Misc. Hardware: The Inductel Inductive Identification System uses a mid-range frequency electromagnetic signal. Transmission of the mid-range frequency carrier wave powers tags that are attached to the (passive) objects to be identified. Modulation of the power transmitted at the station or of the carrier wave losses at the tag enables two-way data transmission. Advantages include no mechanical contact with the object to be identified; two-way data exchange between the station and the tag; precise dialogue zone; fast data exchange rate; no power supply needed for mobile object to be identified. |
Schneider Electric SA | Inductel Inductive Identification System, XGK-S1.0421 | Misc. Hardware: The Inductel Inductive Identification System use a mid-range frequency electromagnetic signal. Transmission of the mid-range frequency carrier wave powers tags that are attached to the (passive) objects to be identified. Modulation of the power transmitted at the station or of the carrier wave losses at the tag enables two-way data transmission. Advantages include no mechanical contact with the object to be identified; two-way data exchange between the station and the tag; precise dialogue zone; fast data exchange rate; no power supply needed for mobile object to be identified. |
Schneider Electric SA | Tesys U Motor Control and Protection Units | Controller: The TeSys model U starter controller is a D.O.L. starter which performs the following functions protection and control of single-phase or 3-phase motors: breaking function, overload and short-circuit protection, thermal overload protection, power switching; control of the application: protection function alarms, application monitoring (running time, number of faults, motor current values, etc.), logs (last 5 faults saved, together with motor parameter values). These functions can be added by selecting control units and function modules which simply clip into the power base The product can therefore be customized at the last moment. |
Schneider Electric SA | Easergy Substation Control Unit | Controller: Fault Passage Indicator ( phase and earth fault for each feeder); Communication system (compliance with most popular protocol such as TCP/IP, IEC 870-5-101, DNP3, Modbus; compliance with various transmission system such as Radio, GSM, PSTN, optical fiber); Interface with switchgears motorization (ready to connect to standard switchgears); Uninterrupted power supply (battery backup power supply, supply for motor mechanism and remote transmission devices); Current measurement; Automation (autochange over, sectionnalizer); Local control. |
Schneider Electric SA | Varlogic Power Factor Controller | Controller: The Varlogic power factor controller permanently measures the reactive power of the installation and control connection and disconnection of capacitor steps in order to obtain the required power factor. It is available in R6, R12 and RC12 type according to number of step output contacts. |
Schneider Electric SA | Vigilohm Insulation Monitor Communication Modules | Monitoring Hardware: Insulation monitoring is provided on IT systems to detect and indicate insulation faults as soon as they occur. The basic function is carried out by an Insulation Monitoring Device (IMD), also referred to in certain documentation as a permanent or continuous insulation monitor (PIM or CIM respectively). The monitoring device injects a DC or low-frequency AC voltage between the installation and earth. The insulation resistance is determined from the resulting current. This technique can be used on all types of installations: AC, DC, rectified, mixed AC/DC, etc. |
Schneider Electric SA | SEPAM Protection Relays, SEPAM 20 | Monitoring Hardware: The Sepam series 20 protection and metering multifunction relays offer simple solutions for the most common applications based on current or voltage metering. |
Schneider Electric SA | SEPAM Protection Relays, SEPAM 40 | Monitoring Hardware: The Sepam series 40 protection and metering multifunction relays, with current and voltage metering capabilities, offer high-performing solutions for more demanding applications. |
Schneider Electric SA | SEPAM Protection Relays, SEPAM 80 | Monitoring Hardware: The Sepam series 80 protection and metering multifunction relays, offer intelligent solution to cover the most complete needs for electrical network and machine protection. (transformer or machine differential protection, 2 communication ports, integral equipment control). |
Schneider Electric SA | SEPAM Protection Relays, SEPAM 2000 | Monitoring Hardware: The Sepam 2000 is a multifunction unit equiped with a built-in PLC for protection, metering, control, monitoring and annunciation functiuns required for its assigned application: substations, busbars, transformers, motors, condensators, generators. |
Schneider Electric SA | MASTERPACT Circuit Breaker | Misc. Hardware: In addition to the traditional features of power circuit breakers (withdrawability, discrimination and low maintenance), Masterpact now offers built-in communications and metering functions, all in optimized frame sizes. Masterpact NT and NW incorporate the latest technology to enhance both performance and safety. Easy to install, with user-friendly, intuitive operation and environment-friendly design, they are, quite simply, circuit breakers of their time. |
Schneider Electric SA | Power Meter, PM500 | Monitoring Hardware: The Power Logic PM500 Power Meter provides all measurement capabilities required to monitor an electrical installation in a single 96 x 96 mm unit. Ideal for metering and monitoring applications, it can be integrated in a PowerLogic system to increase the reliability of your installation while cutting costs. |
Schneider Electric SA | Power Meter, PM 800 | Monitoring Hardware: PM800 offer all the high-performance measurement capabilities required to monitor an electrical installation in a single 96 x 96 mm unit. With its large easy-to-read display, you can monitor all three phases and neutral at the same time. The anti-glare and scratch resistant display features an intuitive interface with context-sensitive menus. A unique white back-light and large digits make it easy to read even in extreme lighting conditions and viewing angles. PM800 features as standard an RS 485 communication port, digital input, digital output, THD metering and alarming in the base unit. PM800 offers custom on-board logging and individual harmonic current and voltage readings. The PM800 is the first meter in this range to offer waveform capture. |
Schneider Electric SA | PowerLogic PM9 Power Meter | Monitoring Hardware: The PowerLogic Power Meter Series PM9 offers all the measurement capabilities required to monitor an electrical installation in a 4-module case (18 mm modules). |
Schneider Electric SA | Power Logic Circuit Monitor, CM4000 | Monitoring Hardware: The Power Logic Circuit Monitor CM4000 provides high-performance acquisition and control devices offering numerous measurement functions. They integrate easily in power monitoring and control systems due to their Ethernet connections and embedded Web servers. |
Schneider Electric SA | Power Logic Circuit Monitor, CM3000 | Monitoring Hardware: The Power Logic Circuit Monitor CM3000 provides high-performance acquisition and control devices numerous measurement functions. They integrate easily in power monitoring and control systems due to their Ethernet connections and embedded Web server. |
Schneider Electric SA | Modbus RS 485 Ethernet Gateways, EGX400MG | Network Gateway: Ethernet server providing embedded HTML pages. These pages are predefined to comply with a large range of Modbus RS 485 communicating devices (Sepam, PM, CM, Altivar, Masterpact with Micrologic A, P & H ...). |
Schneider Electric SA | Modbus RS 485 Ethernet Gateways, EGX200MG | Network Gateway: Modbus RS 485/Ethernet interface |
Schneider Electric SA | Vision System | Misc. Hardware: The Osiview vision controller acquires the images from one or two cameras. It then analyses these images to monitor the application and outputs the results. The keypad enables the monitoring parameters to be configured and defined. The screen enables the camera images and menus to be viewed, as well the text and graphics of the on-board parameterable software. The vision system is used in very diverse domains (e.g., pharmacy, food and beverage processing) to monitor quality, presence, measurement, position, identification of markings, guidance and gripping, verification and reading of characters. |
Schneider Electric SA | Momentum Network Interface Module | I/O Interface: Momentum I/O products are modular. Communication Adapters and Processor Adapters are designed to work as functional modules when they are snapped onto a Momentum I/O base. The I/O bases fit into compact standard housings that can be mounted on a DIN rail or on panels in a cabinet. They read information from field sensing devices and control discrete and analog field actuating devices. Terminal blocks and bus bars are available for use with the bases so that they can be used to support 2-, 3-, and 4-wire field devices. |
Schneider Electric SA | Advantys OTB Network Interface Module, OTB 1S0 DM9LP | I/O Interface: The Advantys OTB distributed I/O solution consists of a compact system (network interface and integrated I/O) with the addition of Twido I/O expansion modules. Each island has, on a DIN rail a network intface module (including Ethernet TCP/IP) with 12 24 V inputs, 6 relay outputs and 2 solid state outputs 24 V 0.3 A. As an extension, up to 7 discrete or analog I/O expansion modules can be added. This structure, created using IP 20 modules, can be used to manage 20 to 244 I/O per island over a maximum length of 328.7 mm (height 94.5 mm). |
Schneider Electric SA | Motor Control and Protection Units | Controller: The LT6 multifunction relay incorporates multiple functions that can be configured locally or remotely, and communication via a bus and its I/O, making it an intelligent protector, ideal for the highly demanding motor protection environment. |
Schneider Electric SA | Altistart Soft Starters | Controller: The Altistart 48 soft start/soft stop unit is a controller with 6 thyristors that is used for the torque-controlled soft starting and stopping of three-phase squirrel cage asynchronous motors in the power range between 4 and 1200 kW. It offers soft starting and deceleration functions along with machine and motor protection functions as well as functions for communicating with control systems. These functions are designed for use in state-of-the-art applications in centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food & beverage, and chemical industries. The high-performance algorithms of the Altistart 48 contribute significantly to its robustness, safety and ease of setup. |
Schneider Electric SA | DeviceNet Modbus Communication Gateways | Network Gateway: The LUFP9 gateway allows a master located on a DeviceNet network to enter into a dialogue with the slaves on a Modbus RTU network. This is a generic protocol converter operating in a way which is transparent to the user. This gateway allows you to interface many products marketed by Schneider Electric with a DeviceNet network. These include TeSys U motor starters, Altivar drives and Altistart soft start/soft stop units. |
Schneider Electric SA | Profibus DP Modbus Communications Gateways, LA9 P307 | Network Gateway: The LA9P307 gateway allows a master located on a Profibus-DP network to enter into a dialogue with the slaves on a Modbus network. This is a generic protocol converter operating in a way which is transparent to the user. This gateway allows you to interface many products marketed by Schneider Electric with a Profibus-DP network. These include TeSys U motor starters, Altivar drivers and Altistart soft start/soft stop units. |
Schneider Electric SA | Profibus DP Modbus Communications Gateways, LUF P7 | Network Gateway: The LUFP7 gateway allows a master located on a Profibus-DP network to enter into a dialogue with the slaves on a Modbus RTU network. This is a generic protocol converter operating in a way which is transparent to the user. This gateway allows you to interface many products marketed by Schneider Electric with a Profibus-DP network. These include TeSys U motor starters, Altivar drivers and Altistart soft start/soft stop units. |
Schneider Electric SA | Fipio Modbus Communications Gateways, LUF P1 | Network Gateway: The LUFP1 gateway allows a master located on a FIPIO network to enter into a dialogue with the slaves on a Modbus RTU network. This is a generic protocol converter operating in a way which is transparent to the user. This gateway allows you to interface many products marketed by Schneider Electric with a FIPIO network. These include TeSys U motor starters, Altivar drivers and Altistart soft start/soft stop units. |
Schneider Electric SA | ASi Communications Gateways, XZ-ML 1X2 X2 | Network Gateway: XZ-ML122 22 gateway modules are slaves on the Modbus bus and masters on the AS-i system. They manage the inputs/outputs present on the AS-i system so that these are available for read/write functions. They provide the connection between Modbus serial link and the AS-i system. They support the AS-i M1 profile and allow the AS-i sensors/actuators to be connected to third-party processing. |
Schneider Electric SA | ConneXium Communications Gateways, 174 CEV 200 40 | Network Gateway: The 174 CEV 200 40 is a standalone TCP-IP/Modbus gateway that can be used to connect Modbus plus devices to a TCP-IP network. It provides Modbus TCP 10/100 Mbps connexion on RJ 45. |
Schneider Electric SA | ConneXium Communications Gateways, 174 CEV 200 30 | Network Gateway: The 174 CEV 200 30 is a standalone TCP-IP/Modbus gateway that can be used to connect Modbus plus devices to a TCP-IP network. It provides Modbus TCP 10 Mbps connexion on AUI, BNC or RJ 45. |
Schneider Electric SA | ConneXium Communications Gateways, TSX ETG 1000 | Network Gateway: The TSX ETG 1000 is a standalone TCP-IP/Modbus gateway module that can be used to connect Modbus devices to a TCP-IP network. The TSX ETG 1000 gateway modules are Modbus master on the serial link. It is not inserted into a PLC rack. The TSX ETG 1000 module can be configured using an embedded Web server. This is an external module, which can be mounted on a DIN rail or on a Telequick pre-slotted plate. It has a 24 VDC power supply and includes an RS232 serial link for connecting an external modem. |
Schneider Electric SA | Magelis Modular iPC 15 inch and sensitive | HMI Hardware: The modularity and flexibility of the Magelis Modular iPC range enables you to choose the ideal solution for your HMI requirements on a PC base, with easy upgrading and fast maintenance: - IP 65 front panels: 15' color TFT LCD screen, with touchscreen capability, and without QWERTY keyboard. - Control boxes, with varying power and expansion capabilities. As standard, the Control boxes include an Ethernet 10/100 Mbps port, two USB ports, the various standard serial and parallel ports, and up to 6 PCI/ISA bus slots. |
Schneider Electric SA | Magelis Modular iPC 15 inch and keyboard | HMI Hardware: The modularity and flexibility of the Magelis Modular iPC range enables you to choose the ideal solution for your HMI requirements on a PC base, with easy upgrading and fast maintenance: - IP 65 front panels: 15' color TFT LCD screen, with or without touchscreen capability, and with QWERTY keyboard. - Control boxes, with varying power and expansion capabilities. As standard, the Control boxes include an Ethernet 10/100 Mbps port, two USB ports, the various standard serial and parallel ports, and up to 6 PCI/ISA bus slots. |
Schneider Electric SA | Magelis Modular iPC 12 inch and sensitive | HMI Hardware: The modularity and flexibility of the Magelis Modular iPC range enables you to choose the ideal solution for your HMI requirements on a PC base, with easy upgrading and fast maintenance: - IP 65 front panels: 12' color TFT LCD screen, with touchscreen capability, - Control boxes, with varying power and expansion capabilities. As standard, the Control boxes include an Ethernet 10/100 Mbps port, two USB ports, the various standard serial and parallel ports, and up to 6 PCI/ISA bus slots. |
Schneider Electric SA | Magelis Modular iPC 12 in and keyboard | HMI Hardware: The modularity and flexibility of the Magelis Modular iPC range enables you to choose the ideal solution for your HMI requirements on a PC base, with easy upgrading and fast maintenance: - IP 65 front panels: 12' TFT color LCD screen, with or without touchscreen capability, and with QWERTY keyboard. - Control boxes, with varying power and expansion capabilities. As standard, the Control boxes include an Ethernet 10/100 Mbps port, two USB ports, the various standard serial and parallel ports, and up to 6 PCI/ISA bus slots. |
Schneider Electric SA | Magelis Compact iPC | HMI Hardware: Magelis Compact iPC are characterized by their compact size, their simplicity and their speed of setup. They use the latest Ethernet TCP/IP and Web client connection technologies. They have a 15' active XGA (1024 x 768) touch screen and a 20 Go IDE internal hard disk. |
Schneider Electric SA | Magelis Smart iPC | HMI Hardware: Magelis Smart iPC are characterized by their compact size, their simplicity and their speed of setup. They use the latest Ethernet TCP/IP and Web client connection technologies. They have a 15' active XGA (1024 x 768) touch screen. |
Schneider Electric SA | Magelis touch-sensitive graphic terminals | HMI Hardware: The New Technology Magelis graphic terminals XBT G are touch-sensitive products with a wide choice of screen sizes (5', 7', 10' and 12') as well as different versions (monochrome, color). - An Optimum 5' monochrome terminal for simple applications. - A range comprising 9 multifunction terminals from 5' to 12' for applications requiring more functions. |
Schneider Electric SA | Magelis graphic terminals | HMI Hardware: Magelis XBT F operator dialogue terminals with graphic screen are available with 5.7' or 10.4' monochrome or color screen, with a keypad, a touch-sensitive screen or a touch-sensitive screen and keys. Magelis XBT F graphic terminals are specially designed for graphic operator dialogue functions. |
Schneider Electric SA | Magelis compact semi-graphic display units | HMI Hardware: Magelis XBT PM terminals have function and service keys on the front panel and a 240 x 64 matrix LCD back-lit display. The ergonomic user interface comprises: - 12 functions keys - 10 service keys - 12 keys Numeric keypad - 4 Dynamic function keys |
Schneider Electric SA | Magelis compact text display units, XBT E | HMI Hardware: Magelis XBT E terminals have 24 function keys, 10 service keys and 12 alphanumeric on the front panel and a 2 or 4 lines of 40 characters LCD back-lit or florescent display (depending on the model). |
Schneider Electric SA | Magelis compact text display units, XBT P ... | HMI Hardware: Magelis XBT P terminals have function and service keys on the front panel and a 2 lines of 20 characters LCD back-lit or florescent display (depending on the model). |
Schneider Electric SA | Magelis compact matrix display units | HMI Hardware: Magelis XBT HM terminals have function and service keys on the front panel and a 8-line matrix LCD back-lit display (depending on the model). |
Schneider Electric SA | Magelis compact text display units | HMI Hardware: Magelis XBT H display units and terminals have function and service keys on the front panel and a text fluorescent or LCD back-lit display (depending on the model). |
Schneider Electric SA | Magelis compact display units | HMI Hardware: Magelis XBT N compact display units are used to represent messages and variables. Various keys can be used to modify variables, control the device, browse in a dialogue application. |
Schneider Electric SA | Twido Programmable Controllers | Controller: The Twido range of programmable controllers offers an 'all-in-one' solution in a compact overall size (80/95 x 90 x 70 mm). A variety of expansion options and product options offer the user a degree of flexibility that is generally only available with larger automation platforms. The TWD LCAA 24DRF 24 I/O compact base controller can take up to 4 discrete I/O expansion modules (corresponding to a 64 I/O configuration), optional modules such as a digital display, memory cartridge and real-time clock cartridge, as well as an additional RS 485 or RS 232C communication port. |
Schneider Electric SA | M1E PLC Processor | Controller: The Momentum M1 processor adapters are based on the Modicon 984 family of products. You can mount these Adapters on Momentum I/O Bases to provide intelligence to the I/O. The Processor Adapter can quickly and independently solve logic, control its own local I/O (discrete or analog), and communicate to other control entities through one of a number of Momentum communication options (Base one link Modbus RS 232 and one network TCP/IP 10Base-T on RJ 45). The Processor Adapter can turn an ordinary I/O Base into a PID controller or high-speed logic solver. |
Schneider Electric SA | M1 PLC Processor | Controller: The Momentum M1 processor adapters are based on the Modicon 984 family of products. You can mount these Adapters on Momentum I/O Bases to provide intelligence to the I/O. The Processor Adapter can quickly and independently solve logic, control its own local I/O (discrete or analog), and communicate to other control entities through one of a number of Momentum communication options (Base on link Modbus on RS 232 and one link Modbus on RS 485). The Processor Adapter can turn an ordinary I/O Base into a PID controller or high-speed logic solver. |
Schneider Electric SA | Zelio Smart Relays | Misc. Hardware: Zelio Logic smart relays are designed for use in small automated systems. They are used in both industrial and commercial applications. For industry: - automation of small finishing, production, assembly or packaging machines. - decentralised automation of ancillary equipment of large and medium-sized machines in the textile, plastics and materials processing sectors, - automated systems for agricultural machinery (irrigation, pumping, greenhouses, ...). For the commercial/building sectors: - automation of barriers, roller shutters, access control, - automation of lighting installations, - automation of compressors and air conditioning systems. If required, modular smart relays can be fitted with I/O extensions and a module for communication on the Modbus network, for greater performance and flexibility, from 10 to 40 I/O. |
Schneider Electric SA | Micro PL7 Processors, TSX 37 | Controller: TSX 37 XX is a compact or modular PLC for OEM machine builders, with up to 484 I/O. Applications: - Machine & manufacturing control - Infrastructures |
Schneider Electric SA | Quantum Concept Processors, 140 CPU 5(6)34 1.A | Controller: Quantum CPUs, which are compatible with Concept and ProWORX software, are single-slot programmable controllers with built-in executive memory, application memory and communication ports. With all memory components on-board, you do not need extra chips or cartridges for configuration. The processors offered can be differentiated by their memory capacities, processing speeds and communication options. |
Schneider Electric SA | Quantum Concept Processors, 140 CPU 113 ... | Controller: Quantum CPUs, which are compatible with Concept and ProWORX software, are single-slot programmable controllers with built-in executive memory, application memory and communication ports. With all memory components on-board, you do not need extra chips or cartridges for configuration. The processors offered can be differentiated by their memory capacities, processing speeds and communication options. |
Schneider Electric SA | Quantum Unity Processors, 140 CPU 6.1 .0 | Controller: Modicon Quantum CPUs 6 are a family of high-performance programmable controllers based on 486, 586, and Pentium processors. They are compatible with Unity Pro software. Some of the features implemented in these CPUs include: - Superior scan times and I/O throughput. - Ability to handle interrupts, timed and I/O based. - Handling of Fast task, as well as a Master task. - Memory expansion through PCMCIA cards. - Multiple communication interfaces embedded in the CPU. - Ethernet 10Base-T/100Base-TX and 100Base-FX - A user-friendly diagnostic and operation LCD display on the front panel of high-end models. The processors offered can be differentiated by their memory capacities, processing speeds and communication options. |
Schneider Electric SA | Quantum Unity Processors, 140 CPU 3(4,5).. 1 | Controller: Modicon Quantum CPUs 3.., 4.., 5.. are a family of high-performance programmable controllers based on 486, 586 and Pentium processors, and are compatible with Unity Pro software. Some of the features implemented in these CPUs include: - Superior scan times and I/O throughput. - Ability to handle interrupts, timed and I/O based. - Handling of Fast task, as well as a Master task. - Memory expansion through PCMCIA cards. - Multiple communication interfaces embedded in the CPU. - A user-friendly diagnostic and operation LCD display on the front panel of high-end models. The processors offered can be differentiated by their memory capacities, processing speeds and communication options. |
Schneider Electric SA | Quantum Factory Cast HMI Modules | HMI Hardware: Ethernet TCP/IP communication Quantum modules with Transparent Ready services: - HTTP communication, data viewing and diagnostic via FactoryCast active Web Server. - Exchanges in compliance with the OPC (OLE for Process Control) standard via an OFS data server. - Modbus TCP message handling - Data Base connexion - event e-mail service - calculations |
Schneider Electric SA | Preventa safety controllers | Controller: Safety controllers XPS MC XXX are designed to meet the requirements of safety applications requiring conformity to category 4 of standard EN 954-1. They are available in 2 versions: - XPS MC16X with 16 inputs and 8 independent safety outputs, - XPS MC32X with 32 inputs and 8 independent safety outputs. Safety controllers devices are based on redundant microprocessor technology, and therefore benefit from more sophisticated functionality: flexibility of choice of safety function and more accurate diagnostics represent some of the advantages from which machine manufacturers and users can benefit by integrating these innovative solutions. |
Schneider Electric SA | Atrium Unity Processors, TSX PCI 57 ..4M and TLX CD GTW 10M | Controller: Atrium TSX PCI 57 ..4M slot PLCs are PC format cards (PCI 32-bit/25?33 MHz bus) to be integrated into a PC running under Windows 2000 or Windows XP. This combination of PLC and PC optimizes performance in applications requiring, for example, a higher level of communication, control or supervision functions. The slot PLC manages the entire PLC station, which comprises the same I/O modules as Premium processors (discrete, analog, application-specific and communication). The TCP/IP software gateway enables via the integrated Ethernet or modem port in the PC. |
Schneider Electric SA | Atrium Unity Processors, TSX PCI 57 ..4M and TLX CD GTW 10M | Controller: Atrium TSX PCI 57 ..4M slot PLCs are PC format cards (PCI 32-bit/25?33 MHz bus) to be integrated into a PC running under Windows 2000 or Windows XP. This combination of PLC and PC optimizes performance in applications requiring, for example, a higher level of communication, control or supervision functions. The slot PLC manages the entire PLC station, which comprises the same I/O modules as Premium processors (discrete, analog, application-specific and communication). The TCP/IP software gateway enables via the integrated Ethernet or modem port in the PC. |
Schneider Electric SA | Atrium Unity Processors, TSX PCI 57 ..4M | Controller: Atrium TSX PCI 57 ..4M slot PLCs are PC format cards (PCI 32-bit/25?33 MHz bus) to be integrated into a PC running under Windows 2000 or Windows XP. This combination of PLC and PC optimizes performance in applications requiring, for example, a higher level of communication, control or supervision functions. The slot PLC manages the entire PLC station, which comprises the same I/O modules as Premium processors (discrete, analog, application-specific and communication. |
Schneider Electric SA | Premium Unity Processors, TSX P57 ..4M | Controller: Premium TSX P57 ..4M automation platform processors manage the entire PLC station comprising: - Discrete I/O modules - Preventa safety modules - Analog I/O modules - Application-specific modules (counter, motion, weighing, communication) If the PLC station needs to extend across a certain distance, these modules can be distributed: - Either in several racks interconnected by Bus X (max. 700 m) - Or via one of the supported fieldbuses. The processors are differentiated by their memory capacities, processing speeds, number of I/O, and number of communication ports.According to the model, Premium processors include: - A 1 Mbps Fipio bus link (bus manager) |
Schneider Electric SA | Atrium PL7 Processors | Controller: Atrium T PCX 57 ..3M slot PLCs are PC format cards (16-bit ISA bus) to be integrated into a PC running under OS Microsoft Windows. This combination of PLC and PC optimizes performance in applications requiring, for example, a higher level of communication, control or supervision functions. The slot PLCs manage the entire PLC station, which comprises the same I/O modules as Premium processors (discrete, analog, application-specific, and communication). These modules can be distributed in one or more racks connected on the bus X. |
Schneider Electric SA | Premium PL7, TSX 57 .. 3M | Controller: Premium TSX P57 ..3M control system platform processors manage the entire PLC station comprising discrete or I/O modules, Preventa safety modules, analog I/O modules, and application-specific modules, which can be distributed over one or more racks connected on Bus X or on a fieldbus. Depending on the model, Premium processors include: - A 1 Mbps Fipio bus link (bus manager). |
Schneider Electric SA | Premium PL7, TSX 57 .. 23M | Controller: Premium TSX P57 ..3M control system platform processors manage the entire PLC station comprising discrete or I/O modules, Preventa safety modules, analog I/O modules, and application-specific modules, which can be distributed over one or more racks connected on Bus X or on a fieldbus. Depending on the model, Premium processors include: - A 10 or 100 Mbps TCP/IP Ethernet port (RJ45 connection) - A 1 Mbps Fipio bus link (bus manager) |
Schneider Electric SA | Premium Factory Cast HMI Modules | HMI Hardware: Ethernet TCP/IP communication Premium modules with Transparent Ready services: - HTTP communication, data viewing and diagnostic via FactoryCast active Web Server. - Exchanges in compliance with the OPC (OLE for Process Control) standard via an OFS data server. - Modbus TCP message handling - Data Base connexion - event e-mail service - calculations |
Schneider Electric SA | Premium Communications Modules, TSX ETY 110 | HMI Hardware: Ethernet TCP/IP communication Premium modules with Transparent Ready services: - HTTP communication, data viewing via Web pages and Java Applets. - Exchanges in compliance with the OPC (OLE for Process Control) standard via an OFS data server. - TCP/IP Modbus message handling. - Open TCP. |
Schneider Electric SA | Twido Programmable Controllers | Controller: The Twido range of programmable controllers offers an 'all-in-one' solution in a compact overall size (80/95 x 90 x 70 mm). A variety of expansion options and product options offer the user a degree of flexibility that is generally only available with larger automation platforms. The TWD LCAA 24DRF 24 I/O compact base controller can take up to 4 discrete I/O expansion modules (corresponding to a 64 I/O configuration), optional modules such as a digital display, memory cartridge and real-time clock cartridge, as well as an additional RS 485 or RS 232C communication port. |
Schneider Electric SA | Quantum Communications Modules | HMI Hardware: The Quantum NOE Ethernet Communications modules offer a lot of function as a basic web server with diagnostic and adjust capability, Modbus TCP communication, I/O scanner, Global Data group comunication, FDR Server, NTP server, SNMP service and email service. |
Schneider Electric SA | PowerLogic BCPM | Monitoring Hardware: The PowerLogic BCPM is a highly accurate, full featured metering product designed for the unique, multi-circuit and minimal space requirements of a high performance power distribution unit (PDU) or remote power panel (RPP). |
Schneider Electric SA | Lexium 32 Servo Drives | AC/DC Drive Control: The modular Lexium 32 servo drive platform provides three book-size servo drive models: Lexium 32 Compact, Lexium 32 Advanced and Lexium 32 Modular. Lexium 32 supports standardized motion interfaces. Comm boards and encoder options allow users to adapt a Lexium 32 solution to a wide variety of automation architectures. Tools for motor sizing, CAD and cabinet drawings, support for PLCopen libraries and user-friendly commissioning software. |
Schneider Electric SA | Advantys ETB | I/O Interface: Advantys ETB is a family of IP 67 digital I/O modules with direct connection to the Ethernet (Modbus TCP/IP) Communication Network. |
Schneider Electric SA | PowerLogic® E5600 | Monitoring Hardware: Power and energy meter |
Schneider Electric SA | Altivar 32 | AC/DC Drive Control: The Altivar 32 VSD has a slim, book-style footprint, side-by-side mounting capability and ability to accept a self-protected disconnect reduces panel space and wiring costs.Certified safety functions for safe power removal, safe limited speed and safe stopping, as well as integrated decision capabilities such as input/output (I/O) event logic, counting and timing functions; Designed to operate without the need for encoder feedback: Delivers exceptional speed and torque control for asynchronous or synchronous AC motors to maximize machine performance |
Sealevel Systems, Inc. | Relio R9 ARM9 Embedded RISC Computer | Controller: Relio R9 is an application-ready platform for your next product design. The system is based on the 200MIPS Atmel AT91SAM9263 microcontroller boasting a 32-bit ARM instruction set for maximum performance. |
Sealevel Systems, Inc. | eI/O Ethernet & PoE Digital I/O Modules | I/O Module: eI/O Ethernet digital I/O modules are cost-effective and allow remote monitoring of digital I/O from anywhere on your 10/100BaseT Ethernet network. I/O options include optically isolated inputs, Reed and Form C relays. |
Sealevel Systems, Inc. | SeaI/O-580 | I/O Module: SeaI/O-580 modules feature 32 optically isolated, dry contact inputs that are controlled and monitored via any 10/100 BaseT Ethernet connection. Communicate with SeaI/O modules using industry standard Modbus protocol or use the Sealevel SeaMAX API software libraries from your application program. The SeaI/O-580E is powered from you 9-30VDC source, or select from a variety of power supply options. The SeaI/O-580PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device; power and data are transferred over a single CAT5 cable. Up to 246 additional expansion modules can be added using convenient pass-through connectors. |
SELETEC Srl | eMAS.eVo (e5616) | Monitoring Hardware: Universal medical device for pressure control on medical gas pipeline system. A single device for every type of alarm: clinical emergency, operating or emergency. The device configuration is simple and fast and is carried out without using a PC. The LED front panel, provided with non-glare laser-engraved indications, allows a fast and univocal identification of the plant malfunction. |
Sierra Monitor Corporation | ProtoCessor Ethernet | Misc. Hardware: ProtoCessor is a Protocol Coprocessor that provides developers with a simple, rapid and cost effective method of adding Modbus TCP to existing and future embedded controllers. |
Sierra Monitor Corporation | ProtoCessor Serial | Misc. Hardware: ProtoCessor is an Protocol Coprocessor that provides developers with a simple, rapid and cost effective method of adding Modbus RTU or other RS-232- or RS-485-based protocols to existing and future embedded controllers. |
Sierra Monitor Corporation | Kohler Generator to LonWorks Adapter, FS-A-01-0104 | Network Gateway: The FieldServer Kohler 550 Adapter for LonWorks? is a protocol translator/gateway enabling the Kohler Generator Controller to communicate with LonWorks ? devices and networks. The FieldServer connects the Kohler to a LonWorks? network through the Modbus RTU protocol. The FieldServer allows status points to be read and the generator to be enabled to the LonWorks ? network. The Adapter is connected to the LonWorks ? Network by being commissioned into the network using a Network Management tool (i.e., LonMaker or equivalent package). |
Sierra Monitor Corporation | FieldServer Driver, Modbus ASCII -- FS-8700-08 | Software - Device Driver: A communications interface solution for Modbus serial devices |
Sierra Monitor Corporation | FieldServer Driver, Modbus RTU -- FS-8700-01 | Software - Device Driver: A communications interface solution for Modbus serial devices |
Sierra Monitor Corporation | FieldServer Driver, Modbus TCP -- FS-8704-03 | Software - Device Driver: A communications interface solution for Modbus TCP/IP devices |
Sierra Monitor Corporation | ProtoCessor ProtoNode Series | Network Gateway: Protocol converter for the OEM market, enabling manufacturers to easily add multiprotocol output capability to their device, meeting the needs of their end-user. ProtoNode is mounted in its own enclosure to make it easy for OEMs to mount it inside or outside their device. Utilizing the extensive 100+ FieldServer Driver Library, the ProtoNode can easily converted a wide range of protocols and devices to Modbus RTU, Modbus ASCII or Modbus TCP. |
Sierra Monitor Corporation | FieldServer QuickServer Gateway, FS-QS-101X Series | Network Gateway: Protocol converter used to enable different devices and systems to interface together. Utilizing the extensive 100+ FieldServer Driver Library, the QuickServer can easily converted a wide range of protocols and devices to Modbus RTU, Modbus ASCII or Modbus TCP. QuickServer utilizes the same proven FieldServer technology found in our more comprehensive gateways, but in a compact design at a cost-effective price. |
Sierra Monitor Corporation | Carbon Monoxide Gas Sensor, model 5100-04-IT | Monitoring Hardware: Network-enabled gas detector with choice or combination of outputs, including 4-20 mA, serial RS-485 Modbus RTU, and SMC Sentry digital bus interfaces. |
Sierra Monitor Corporation | ProtoCessor ProtoCarrier Series | Network Gateway: Protocol converter for the OEM market, enabling manufacturers to easily add multiprotocol output capability to their device, meeting the needs of their end-user. ProtoCarrier consists of a ProtoCessor mounted on a daughter card, making it easy for OEMs to mount it in their device. Utilizing the extensive 100+ FieldServer Driver Library, the ProtoNode can easily converted a wide range of protocols and devices to Modbus RTU, Modbus ASCII or Modbus TCP. |
Sierra Monitor Corporation | QuickServer, FS-QS-12xx | Network Gateway: QuickServer is a high performance, fully configurable, cost-effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants. |
SILA Embedded Solutions GmbH | Modbus Master Stack | Software - Device Driver: Embedded Solutions' Modbus Master Stack in ANSI-C for embedded systems supports Modebus RTU/ASCII and TCP. It supports different targets like Atmel AVR (ASCII, RTU), ARM7 (STR71, LPC214X, AT91SAM7), Coldfire, TI MSP430, Win32 and Linux. The stack can also be ported to your platform, which can be done in less than one week. The product is delivered with full source and comes without any runtime royalties. |
SILA Embedded Solutions GmbH | Modbus Slave Stack | Software - Device Driver: Embedded Solutions' Modbus Slave Stack in ANSI-C for embedded systems supports Modbus RTU/ASCII and TCP. It supports different targets like Atmel AVR (ASCII, RTU), ARM7 (STR71, LPC214X, AT91SAM7), Coldfire, TI MSP430, Win32 and Linux. The stack can also be ported to your platform, which can be done in less than one week. The product is delivered with full source and comes without any runtime royalties. |
Softing Industrial Automation GmbH | FF-H1/Modbus/TCP Gateway (FG-100 FF/M) | Network Gateway: Gateway between Ethernet-based host systems with Modbus/TCP and the Foundation fieldbus H1 bus system. Ideally suited to collect operational data and connect visualizations, controls etc. |
Softing Industrial Automation GmbH | Portable Protocol Software for Field Devices, MB-TCP-SRV/SC | Software - Programming: Portable protocol stacks for Modbus TCP, PROFINET IO, and EtherNet/IP to enhance field devices with existing Ethernet hardware quickly and with a clearly defined level of development effort to include a Real-Time Ethernet interface. These field devices can then be used for control and motion applications, remote maintenance, operation and monitoring, and other applications. |
Softing Industrial Automation GmbH | TH LINK Modbus TCP, GDA-JE-003036 | Monitoring Hardware: The TH SCOPE and the TH LINK provide a network-wide monitoring capability for Modbus TCP, PROFIBUS, PROFINET, EtherNet/IP and Industrial Ethernet. The concept consists of the web-based TH SCOPE software and the TH LINK network access. |
Softing Industrial Automation GmbH | Modbus TCP OPC Server | Software - OPC: Softing's Modbus TCP OPC Server offers quick and convenient access to the I/O registers and coils of any Modbus TCP device or control system. The OPC Server is easy to operate, extremely powerful and can be flexibly assigned both as a Modbus client and server. |
Softing Industrial Automation GmbH | FPGA-based Hardware Integration Kit for Field Devices | Network Gateway: The Fieldbus Kit (FBK) communication module is a complete interface for connecting field devices to the PROFINET IO, EtherNet/IP and Modbus TCP real-time Ethernet protocols. The Simple Device Application Interface (SDAI) is used to connect the device application to the protocol software. Flexible communication modules are an alternative when small quantities of interface connections are needed or the necessary hardware development skills are lacking. They can be used to quickly and easily extend the functionality of existing field devices. |
Teledyne LeCroy Frontline | NetDecoder | Software - Testing and Simulation: Frontline's NetDecoder(TM) protocol analyzer is designed to diagnose and troubleshoot communication problems in industrial networks. Frontline's NetDecoder analyzer has the ability to monitor and provide detailed timing, data and messaging information for serial, Ethernet, SCADA and industrial bus networks. |
Teledyne LeCroy Frontline | Serialtest, STA-232 and STA-422/485 | Software - Testing and Simulation: Serialtest Async is a PC-based analyzer for passively monitoring or actively testing serial asynchronous communication circuits and networked equipment, at speeds up to 921.6 Kbps. The product is now Windows 8 compatible. |
Thermokon Sensortechnik GmbH | WRF08 8T RS485 MODBUS | Misc. Hardware: Room operating panel with 8 buttons for single room application with integrated temperature sensor. Any of the 8 push buttons can be freely configured for heating, air-conditioning, illumination, blinds- or shutter-control. Corresponding design frames made of glass, stone or brushed stainless steel qualify the WRF08 ideally for design oriented facilities. |
Thermokon Sensortechnik GmbH | WRF06 LCD RS485 Modbus Type 1 | Misc. Hardware: Room operating panel with controller, designed to be combined with various European switch manufacturer's design frames with standard 55x55mm aperture. A multitude of design frames made of glass, stone or brushed stainless steel qualify the WRF06 ideally for design-oriented applications. Four buttons to set parameter for single room application with integrated temperature sensor; Optional extension modules add digital inputs, relay, triac or analogue outputs for single room controller operation. |
Thermokon Sensortechnik GmbH | WRF06 LCD RS485 Modbus Type 2 | Misc. Hardware: Room operating panel with controller, designed to be combined with various European switch manufacturer's design frames with standard 55x55mm aperture. Design frames made of glass, stone or brushed stainless steel qualify the WRF06 ideally for design-oriented applications. Four buttons to set parameter for single room application with integrated temperature sensor. Optional extension modules add digital inputs, relay, triac or analogue outputs for single room controller operation. |
Thermokon Sensortechnik GmbH | WRF08 2T RS485 Modbus | Misc. Hardware: Room operating panel with 2 buttons for single room application with integrated temperature sensor. Although typically used for set-point temperature, both buttons can be configured for heating, air-conditioning, illumination, blinds- or shutter-control. Design frames made of glass, stone or brushed stainless steel qualify the WRF08 for design-oriented facilities. |
Thermokon Sensortechnik GmbH | WRF08 4T RS485 Modbus | Misc. Hardware: Room operating panel with 4 buttons for single room application with integrated temperature sensor. Any of the 4 buttons can be configured for heating, air-conditioning, illumination, blinds- or shutter-control. Corresponding design frames made of glass, stone or brushed stainless steel qualify the WRF08 for design-oriented facilities. |
Thermokon Sensortechnik GmbH | WRF08 12T RS485 Modbus | Misc. Hardware: Room operating panel with 8 buttons for single room application with integrated temperature sensor. Any of the 12 buttons can be configured for heating, air-conditioning, illumination, blinds- or shutter-control. Corresponding design frames made of glass, stone or brushed stainless steel qualify the WRF08 for design-oriented facilities. |
United Electronic Industries, Inc. | UEIModbus Cube & Rack Systems | Controller: The UEIModbus cubes are compact, rugged, Ethernet-based data acquisition and control interfaces that communicate with a host computer or PLC over Modbus TCP. The wide variety of I/O UEI offers allows you to configure one or more cubes or racks to match the specific I/O requirements of your application. The UEIModbus chassis family is ideally suited for a wide variety of industrial monitoring and control applications. The UEIModbus functions as a Modbus slave that is easily accessed by any software client acting as a Modbus master. Most popular HMI software supports the Modbus protocol. Each UEIModbus system Mod UPG allows the UEIModbus to run as a Modbus TCP node. |
Verder Ltd | Verderflex® Vantage 5000 Modbus® | Misc. Hardware: The new Modbus® RTU version of the Verderflex® Vantage 5000 peristaltic pump brings easier system integration and real time communication to form a sophisticated, remotely operated pumping network. Modbus® RTU is a simple, stable, globally used, open data communications protocol with over 7 million active nodes or connection points in use in North America and Europe. It allows a single master controller, such as a PLC, to easily work with multiple, uniquely addressed Verderflex Vantage 5000 pumps in digitally controlled, high resolution dosing or metering systems. |
Volktek Corporation | Managed Industrial Ethernet Switch, INS-8528M | Misc. Hardware: The INS-8528M is a Layer2 Managed Industrial Switch specifically designed to suit heavy industrial environments. It contains all the standard features to deploy in automation systems. Engineered with hardened components and enclosed in a rugged IP30 metal case, the INS-8528 can operate in temperatures from 0°C to 70°C (wide temperatures from -40°C to 70°C for INS-8528W) and also has excellent tolerance capability to high vibration and shock. |
Volktek Corporation | Managed Industrial Ethernet Switch, INS-8648M | Misc. Hardware: Volktek's INS-8648M Managed Industrial switch is equipped with 8 port 10/100/1000Base-T and 4 Gigabit SFP slots. Engineered with hardened components and enclosed in a rugged case, the switch can operate in temperatures from 0°C to 70°C (wide temperatures from -40°C to 70°C for INS-8648W) and has an excellent tolerance capability to high vibration and shock. As an Industrial switch, the INS-8648 suits heavy industrial environments, and contains all the standard features of other switches. |
WAGO Kontakttechnik GmbH & Co. KG | 750-352 ECO Ethernet Fieldbus Coupler | I/O Interface: I/O-SYSTEM 750 is a complete field-side wiring system for bus terminals without definition of the final fieldbus. Combination of digital and analog I/Os with different potentials and signals within one fieldbus node. The ECO Coupler supports prominent protocols such as MODBUS TCP/IP and EtherNet I/P and accommodates 64 I/O modules. |
WAGO Kontakttechnik GmbH & Co. KG | Programmable Fieldbus Controller, 750-881 | Controller: High-speed 750-881 ETHERNET 2.0 Programmable Fieldbus Controller processes 1000 instructions/235 microsecs, and provides significant amounts of memory for PLC programs and Web applications. |
ABB Ltd | Serial Communication Adapter, CSO 05000 | Network Gateway: The CSO 05000 is a DIN-rail mount serial communication adapter (SCA) for automatic meter reading (AMR) in Modbus RTU/ASCII networks. The SCA converts the M-bus protocol from the electricity meter to Modbus entities thus making it possible to use data from M-Bus meters in a Modbus RTU/ASCII network. The SCA has the size of two DIN modules and follows ABB's Pro M standard, which defines mechanical dimensions, way of mounting and design. |
AGILiCOM | AGILiGATE Modbus/TCP to serial link, AG-P014 | Network Gateway: AGILiGATE MODBUS/TCP gateway allows you to connect any Modbus serial equipment to a Modbus TCP network. It is able to work as client or server on the Modbus TCP side, and as a Modbus master or slave, on the other side. It is also possible to integrate other protocols on the serial link. AGILiGATE Modbus/TCP is configured via its own embedded web server and can exchange up to 1024 registers. It also provide 1 digital input an 1 digital output drivable through Modbus. |
AREVA T&D | BiTRONICS M871 | Monitoring Hardware: The BiTRONICS M871 Monitoring & Recording IED offers high-speed, high-accuracy power measurements for the electric utility substation. The M871 calculates True RMS Voltage, Current, and Watts every quarter cycle. Harmonics to the 63rd, K-Factor, Power, Frequency, sequence components, and many other measurements are updated every cycle. This calculation speed, coupled with a Modicon PLC on a Modbus or high-speed Modbus Plus LAN, enables control applications formerly unthinkable with measurement instruments. An optional 10/100 Mbps Ethernet port communicates with UCA2.0-Compliant protocols (OSI and TCP/IP simultaneously). The M871 is also a powerful recorder featuring waveform capture, accurate up to 100A ac symmetrical, with 128 samples per cycle resolution, two disturbance recording modes at rates of 1-3600 samples per cycle, sequence of event and trend recording. The combination of reliability and performance has made BiTRONICS brand meters the instrument of choice in substation applications. |
B&R Industrial Automation | X20 bus controller for Modbus TCP | Controller: The X20BC0087 bus controller enables X2X Link I/O nodes to be linked to Modbus TCP. The bus controller is operated with the Modbus TCP library or by external systems with a Modbus TCP master function. ? Fieldbus: Modbus/TCP; ? I/O configuration via the fieldbus; ? Integrated 2x switch for efficient cabling; ? Configurable I/O cycle (0.5 - 4 ms); ? Reaction time: 1 - 8 ms (depending on load on integrated switch) |
Balogh T.A.G. Corporation | BIET-Ethernet IP Control Interface | Controller: The BIET module is a single board EtherNet? solution for Automatic Identification. The BIET module integrates BALOGH?s Passive Radio Frequency Identification Technology and the EtherNet? architecture into one field mountable enclosure. The BIET module is designed to manage two BALOGH Transceiver channels and allows the user to pass TAG data across an EtherNet? network with a simple set of instructions. This is a multi-protocol board, it communicates with TCP/IP, EtherNet/IP, and ModbusTCP/IP protocols. |
Byres Security Inc. | Tofino(TM) Enforcer for Modbus TCP, 9211-ET and 9520-MBT | Monitoring Hardware: Tofino provides advanced security services tailored specifically to the requirements of control networks. Tofino may be installed in front of critical PLCs, RTUs and other devices without any pre-configuration or requirment to change the architecture or addressing of an existing control network. Using the Tofino Central Management Platform software, the control systems engineer can edit and test firewall rules that specify which devices in the network are allowed to communicate with each other, and what protocols they may use. Any traffic that does not match these rules is blocked and reported to the Tofino Central Management Platform. The optional Tofino Enforcer for Modbus allows you to specify which Modbus function codes and register addresses may be accessed on each protected Modbus slave, providing advanced security for critical Modbus devices. |
Changshu Switchgear Mfg. Co., LTD. | Ethernet Gateway CN1EG/10 | Network Gateway: CN1EG/10 serves as an interface between Modbus serial devices and computer hosts running Modbus TCP on an Ethernet network. |
Data-Linc Group | DLM4100 Dial-Up Leased Line Modem | Modem: height='5' bgcolor='#dddddd'> |
Eaton Corporation | Ethernet Modbus Network Adapter, D77D-EMA | Network Gateway: With a direct focus on speed productivity, diagnostics and system design, the D77D-EMA Ethernet Modbus Network Adapter provides superior integration of IT. motor control and D77 IO products. Three powerful features are combined into one module: Modbus TCP, RS-485 Serial Modbus, and a Modbus Pass-Through from Modbus TCP to Serial Modbus. No other device on the market provides these features in addition to Quick Connect Port (QCPort) connectivity. |
Endress+Hauser Process Solutions | Promag 53 Electromagnetic Flowmeter | Monitoring Hardware: electromagnetic flowmeter |
Endress+Hauser Process Solutions | Promass 83 Coriolis Flowmeter | Monitoring Hardware: Coriolis flowmeter for measurement of liquids, steam and gases |
Endress+Hauser Process Solutions | Promass 84 Coriolis Flowmeter | Monitoring Hardware: Mass flow measurement device suitable for measuring virtually all fluids (other than water), gases and liquefied gases in a custody transfer application. |
Hölscher + Leuschner GmbH | L167 | I/O Module: The L167 provides 16 discrete optically isolated inputs and 24 discrete optically isolated open emitter outputs. They are grouped in eight-bit segments, so the L167 provides five available connectors. It is powered with separate 5 VDC (connection via 3pin terminal block) and designed for the placement on a DIN rail. A separate 24 VDC source is required for driving outputs and inputs. |
Jiangsu Sfere Electric Company, Ltd. | Digital Display Multi-functional Power Meter, PD194E-9S4 | Monitoring Hardware: Digital Display Multi-functional Power Meters are designed for the demands of intelligent power monitoring and electric energy metering for the power system, industrial and mining enterprises, public facilities and intelligent building. They can measure all the general power parameters in three-phase electric network with high accuracy such as three-phase voltage, three-phase current, active power, reactive power, apparent power, frequency, power factor, four-quadrant electric energy and UIPQ demand, as well as have such functions as communication interfaces and electric energy pulse output, etc. |
Nan Jing New Power Electric Shares Co., Ltd. | Intelligent Flow Totalizer | Monitoring Hardware: NewPWR's Flow Totalizer performs compensated flow calculations and accumulations for data acquisition, control, and display purposes. The device offers a wide range of capabilities for flow computations, totalizing, display, and interface with PC. The asynchronous digital interface can be either RS232 or RS485. Internally stored flow totals can be maintained for 10 years after a power failure. |
Parker Motion Systems Group | P2M Modbus TCP/IP | I/O Interface: The P2M Industrial Ethernet node allows for a simple and cost efficient connection to any Industrial Ethernet network. It can connect three Parker valve products: Moduflex, H Micro and all five sizes of H ISO valves (15407-2 & 5599-2) to Ethernet networks |
PROCENTEC | VPGate MODBUS/TCP to Serial, 110-00013A | Network Gateway: VPGate MODBUS/TCP gateway allows you to connect any Modbus serial equipment to a Modbus TCP network. It is able to work as client or server on the Modbus TCP side, and as a Modbus master or slave, on the other side. It is also possible to integrate other protocols on the serial link. VPGate Modbus/TCP is configured via its own embedded web server and can exchange up to 1024 registers. It also provide 1 digital input an 1 digital output drivable through Modbus. |
SAN People | DinPAD | Network Gateway: The SAN People DinPAD connects RS232 serial devices directly to Ethernet networks. It offers a large range of embedded applications: a Serial Redirector to remotely access your devices without changes to your application running on a PC, Transparent communication over Ethernet Networks, Embedded Web server to run your own HTML pages and a Modbus to Modbus TCP/IP bridge functionality. The DinPAD comes in three versions: baseline, Scripter and Logger. The Scripter model can run customized programs develop with our SANScript language. Data Logging capability is included in the Logger version. All these functionalities are available across our complete range of products. The DinPAD is a standard EtherPAD in a DIN compliant package. It is rail mountable in a very compact package. Please contact SAN People directly for technical support and ordering information. |
Seekirk, Inc. | A1700 Annunciator | Monitoring Hardware: window type annunciator |
Seekirk, Inc. | Annunciator A2100 | Monitoring Hardware: The Seekirk model A2100 is a 12 point Modbus/DNP/standalone annunciator offering a wide range of configurations. Designed for use within transformers, switchgear, breakers and/or within any processing equipment or control room applications, either attended or unattended, for the monitoring of alarm conditions. Industries include electric generation, transmission distribution, gas and water utilities. The annunciator can be selected to handle the Modbus data interchange in either RTU or ASCII serial formats. The annunciator can accept alarm inputs from either the serial input as Modbus commands or from hardwired alarm inputs via the internal or rear panel terminals. The status of any alarm condition can be read from the annunciator by the Modbus master controller. |
Shanghai Welltech Automation Co., Ltd | WT4300E Series Electromagnetic Flowmeter | Sensor: Widely applicable to industrial process control field, such as metallurgy, paper making, petrochemical, pharmacy, food processing, brewing, for measuring the fluid flow with conductivity no less than 5?S/cm. |
Sparling Instruments, LLC | Tigermag, FM6XX | Monitoring Hardware: Electro-magnetic flow meter which measures the flow rate of conductive fluid in full pipes |
Stanley Assembly Technologies | QPM Sigma Controller, Q3000 | Misc. Hardware: QPM controllers for handheld and fixtured QPM Assembly Tools. |
SymCom | CIO-EN Module (non-POE) Series B | I/O Interface: Modbus TCP and Modbus RTU interface capable of providing discrete control and monitoring of an overload relay over a Modbus network. |
Tailyn Technologies, Inc. | IVS-400 series Smart-managed Gigabit Ethernet Switch, IVS-408-2F | Misc. Hardware: IVS-408-2F is a full Gigabit Ethernet switch, providing 8 Gigabit Ethernet ports for upgrading the existing network infrastructure to full gigabit speed. A full Gigabit network provides a higher bandwidth than the legacy Fast Ethernet network and reduces the response time for time-sensitive applications. With support for network redundancy ring protocol and multicasting, IVS-400 series smart-managed switches are easy to use in a large network and provide reliable service. |
Vectron International | VC-2030 Modbus RTU Converter | Network Gateway: The VC-2030 MODBUS RTU RS-485 Converter provides viscosity and temperature data over Modbus RTU when connected to the SenGenuity ViSmart® VS-2000 and VS-2500 series of viscosity sensors. The Converter functions as a server and supports the Read Holding Register (FC 03) and Read Input Register (FC 04) function codes. |
Wanlong Group. Co. Ltd. | ST600 Multifunction Protection Relay | Misc. Hardware: ST600 multifunction protection relays offer an intelligent solution to cover the need for electrical network and machine protection (capacitor, line, transformer or machine protection) |
Yaskawa Electric America, Inc. | CM090 Ethernet Option for Yaskawa VFDs | AC/DC Drive Control: Designed for use with its Variable Frequency Drives GPD515/G5, F7, G7 and P7, this card allows interoperability among different vendor devices using the Modbus TCP/IP protocol to communicate among the devices. |
ABB Ltd | OriMaster M, orifice-plate flowmeter | Sensor: One-piece flowmeter suitable for clean liquids, gases and steam applications in line sizes from 1 to 8 inches (DN25 to DN200) and at pressures up to 1450 psi (100 bar) |
ABB Ltd | ACS310 Pump & Fan AC Drive | AC/DC Drive Control: AC Drive family ranging from 0.5 HP to 30 HP (0.37 kW to 22 kW). Built-in PID controllers are used to vary the drive’s performance, in response to changes in pressure, flow, or other external data. The controllers can eliminate the need for an external PLC. |
Accuenergy Corp. | Acuvim II | Monitoring Hardware: The Acuvim II is a high-end multifunction power meter for monitoring and controlling of power distribution systems. Acuvim II may be used as a data gathering device for an intelligent Power Distribution System or Plant Automation System. All monitored data is available via a digital RS485 communication port running Modbus Protocol. |
Advantech | Modbus Gateway, EKI-1221/1222/1224 | Network Gateway: Network-based, Modbus data gateways for integrating new and existing Modbus/RTU and Modbus/ASCII serial devices to newer TCP/IP networked-based devices. |
Advantech | ADAM-6022 | Controller: Ethernet-enabled dual-loop PID controller for general purposed PID control applications, with utility software included to set PID parameters (Pv, Mv, & Sv). Through an integrated web page, users can monitor and change the control set point through the Internet via web browser. |
Ascon Tecnologic Inc. | AutoLink Data Acquisition and Supervisory Control System | Software - SCADA: SCADA for process visualiztion, control, and monitoring of plant floor operations |
Avista Realtime Systems, LLC | NetPro-ModServLiteCE | Software - Programming: This code library helps developers build a Modbus TCP Server (slave) solution. The code allows you to emulate multiple Modbus RTUs in the same application domain. The RTU data is gathered from local/distributed I/Os or by interfacing with other communication protocols such as DNP3 or OPC. The solution is for building a Windows CE based RTU, RTU simulator, protocol convertor, data concentrator or smart Modbus gateway. The package comes with a complete set of developer's manual, 30 minutes full featured free library, 3 months support and example solutions to demonstrate how to use the code. |
B&B Electronics Mfg. Co. | Vlinx MESR400 Series | Network Gateway: Industrial Modbus Ethernet to Serial Gateways |
B&B Electronics Mfg. Co. | Ilinx™ Optically Isolated Converters | Network Gateway: Family of industrial grade converters and repeaters with 3-way optical isolation for rugged applications. Data ports are isolated from each other. Power supply is fully isolated with operation from 10V to 48V. |
Baldor Electric Company | VS1ST Microdrive | AC/DC Drive Control: Designed to replace fix speed motor starters, Baldor VS1ST is easy to setup, and ready to run out-of-the box using only forty five parameters for quick startup. The keypad is used for both programming and local operator control. Heavy-duty rated with capability from ½ to 15 Hp. |
Bihl+Wiedemann GmbH | AS-i 3.0 Modbus Gateways | Network Gateway: AS-i - Modbus Gateway in Stainless Steel |
Bronkhorst High-Tech B.V. | Metal Sealed EL-FLOW® GAS Mass Flow Meters/Mass Flow Controllers | Monitoring Hardware: EL-FLOW® Series Mass Flow Meters/Controllers are thermal mass flow meters of modular construction with a 'laboratory style' pc-board housing. Control valves can either be integrally or separately mounted, to measure and control gas flows. |
Calex Electronics Limited | Multifunction Indicator/Controller PPT245 | Controller: The PPT245 DIN-rail mounted controller is a versatile alternative to panel-mounted instruments. One analogue input is configurable for up to 18 different sensors/signals. |
Calta Computer Systems Ltd | PLC09 ARBITRATOR | I/O Interface: The PLC09 Arbitrator unit (Modbus port expander or multiplexer) permits communication to a PLC or other Modbus device from a single serial port to up to three separate host computers or terminals. |
Calta Computer Systems Ltd | Modbus for Windows (Mdbus) | Software - HMI: Modbus for Windows provides an interactive tool for development, data acquisition, monitoring, and testing of systems employing the Modbus protocol. This tool provides the interface between the serial port connected to the Modbus device and the Windows environment. |
Climet Instruments Company | Cl-1053 Particle Counter | Sensor: Battery operated portable particle counter with a high flow rate for counting large air volumes quickly. |
Contemporary Control Systems, Inc. | BAS Remote | Network Gateway: BACnet/IP point Expansion and Modbus Serial Gateway |
Danaher Industrial Controls (West brand products) | ProVU 4 Advanced Temperature Controller | Controller: Temperature and process controller with advanced functionality including profiling and datalogging options. Flexible I/O option boards mean the controller can be precisely matched to an application. |
Deep Sea Electronics PLC | Auto Start & Automains Failure Control Modules, DSE7310 & DSE7320 | Controller: The DSE7310 is an Automatic Start Control Module and the DSE7320 is an AutoMains (Utility) Failure Control Module. Both modules have been designed to start and stop diesel and gas generating sets that include electronic and non-electronic engines. The DSE7320 includes the additional capability of being able tomonitor a mains (utility) supply. Both modules include USB, RS232 and RS485 ports as well as dedicated DSENet terminals for expansion device connectivity. |
Detcon Inc. | Remote Display, Model RD-8X-N7 | HMI Hardware: Model RD-8X-N7 is a read-only remote display unit designed to operate as a Modbus™ Master |
Detcon Inc. | Remote Display, Model RD-8X-N4X | HMI Hardware: Model RD-8X-N4X is a read-only remote display unit designed to operate as a Modbus™ Master. |
Digi International | PortServer TS HCC MEI | Network Host Adapter: The PortServer TS HCC MEI family of device servers delivers high-performance serial-to-Ethernet connectivity. It is designed specifically for traffic management applications where extended vibration, temperature and moisture tolerance is required. |
E-Mon | Class 3000 Advanced Meters | Monitoring Hardware: Low-cost, intelligent kWh/Demand meter displaying kWh, kW with peak date and time, real-time kW, amps per phase and volts per phase. |
E-Mon | Class 5000 Meters | Monitoring Hardware: Energy Monitoring Meter |
Eaton Corporation | Motor Insight, C441 | Monitoring Hardware: Solid-state motor protection, control and advanced monitoring capabilities in a single device |
Eaton Corporation | M-Max Drives | AC/DC Drive Control: Including both single and three-phase devices, the microprocessor-based drives incorporate standard features that can be programmed to tailor the drive's performance to suit applications such as conveyor belts, transport drives, packaging machines, pumps and fans. |
Eaton Corporation | 4000A Narrow Frame Power & Air Circuit Breaker | Misc. Hardware: Eaton's most compact 4000A narrow breaker is designed to provide excellent safety with a high level of performance in a size that meets the switchgear and switchboard needs. |
Emerson Process Management | DL8000 Preset | Controller: The DL8000 Preset is a rugged electronic preset that provides precise custody transfer batches for petroleum, industrial chemicals, and other products. It accepts volumetric and mass inputs from turbine, Coriolis, ultrasonic, or other flow measurement devices using single or linearized meter factors. |
Emotron Inc. | FDU/VFX Variable Speed Drives | AC/DC Drive Control: Variable speed drives for pumps, fans, compressors and blowers. |
Endress+Hauser Process Solutions | Proline t-mass 65, Thermal Mass Flowmeter | Monitoring Hardware: Proline t-mass 65 is a heavy-duty, high-performance thermal mass flowmeter. |
Entertron Industries, Inc. | Smart-PAK micro PLC | Controller: Board-level micro PLCs with 12 bit analog, 7 amp relay outputs, a second serial port option, networking capabilities - for OEM applications |
Ethernet Direct Corporation | Owl Data Acquisition Module, RUM-9017 | Monitoring Hardware: Data acquisition module |
Ethernet Direct Corporation | Boxer, BMM-101 | Network Gateway: Single-port Modbus gateway to allow legacy Modbus RTU/ASCII devices to operate on a Modbus TCP network. It allows Modbus serial master or slave to communicate with Modbus TCP?s slave or master. |
Exlar Corporation | Tritex IITM Linear and Rotary Actuators | AC/DC Drive Control: Tritex II actuators integrate an AC powered servo drive, digital position controller, brushless motor and linear or rotary actuator in one elegant, compact, sealed package. |
Galil Motion Control, Inc. | RIO Pocket PLC series | I/O Interface: Intelligent I/O handling with expanded program memory, variables, arrays and programmable PID control loops. The RIO-471x2 provides 400 lines of program memory, 254 symbolic variables, and six programmable PID loops. |
General Monitors Inc | Flame Detectors, Series f3100 | Sensor: FL3100 Flame Detector Series are designed with advanced ultraviolet (UV) and infrared (IR) sensing technology. Choose from interchangeable UV, UV/IR or Digital Frequency Infrared (DFIR) detectors to meet individual application requirements. |
Hamilton Company | Visiferm DO | Sensor: Self-contained optical dissolved oxygen sensor |
Hardy Instruments, Inc. | HI 4060 Rate Controller | Controller: Hardy Instruments' HI 4060 is a compact, single-feeder, closed-loop rate controller for use in a variety of applications, including auger, belt and vibratory-based feeders, converting them from volumetric to gravimetric. |
Hitachi America, Ltd. | SJ700 Series Inverters | AC/DC Drive Control: High-performance AC Drive |
ISEP (S) Pte Ltd | Modbus Alert SMS | Remote Terminal Unit: The Modbus Alert SMS (SMS-Alert-03) allows you to monitor and control your Modbus devices using your hand phone. |
IXXAT Automation GmbH | FPGA-based Industrial Ethernet Module (IEM) | Misc. Hardware: Industrial Ethernet Module provides customers with a universal interface for the integration of various Industrial Ethernet technologies into their products, with a three-port switch for Modbus-TCP, Profinet, and EtherNet/IP. |
KIN-TEK Laboratories, Inc. | FlexStream Automated Permeation Tube System | Sensor: FlexStream automated Permeation Tube System is used to create precision gas mixtures. Mixtures are produced by diluting the miniscule flow emitted from permeation (or diffusion) tubes with a much larger flow of inert diluent gas, typically nitrogen or zero air. |
LOYTEC electronics GmbH | LINX-100 Building Automation Server | Monitoring Hardware: Building Automation Server with embedded visualization capability |
Mastervolt International BV | MasterBus Modbus Interface | Network Gateway: Modbus interface for electrical systems in marine applications |
Matrox Electronic Systems Ltd. | Matrox Iris GT Cameras | Misc. Hardware: Matrox Iris GT is a line of smart cameras with Matrox Design Assistant, an integrated development environment (IDE). Manufacturing engineers and technicians can deploy machine vision applications on a highly integrated platform without the need for conventional programming. Video capture, analysis, location, measurement, reading, verification, communication and I/O operations as well as a web-based operator interface are all set up within the single IDE. |
Metrix Instrument Co. | Machine Condition Monitor. DW 7100 & DW8100 | Monitoring Hardware: This machine condition monitor protects plant assets from degradation and catastrophic failure. It features high-quality signal conditioning with a sampling rate of 125 msec. regardless of the number of channels. |
MicroMotion, Emerson Process Management | Micro Motion Series 3000 Net Oil Computer | Controller: Transmitter/controllers for point-of-process applications that require accurate process indication and focused PLC capabilities |
Parker Hannifin Corporation, SSD Drives Division | AC890 Modular AC Drives | AC/DC Drive Control: AC890 System Drives are modular AC drive units that can be combined to form a complete multi-section drive system. |
Precision Digital Corporation | PD6080/81 Series Super Snooper Modbus Scanners | Monitoring Hardware: The ProVu PD6080 Series Super Snoopers are NEMA 4X 1/8 DIN panel indicators with bright, easy to read digits. The Super Snooper scanners can be set up as Modbus RTU Masters, Slaves, or Snoopers, monitoring multiple Modbus devices for up to 16 process variables, including level, interface level, density, and temperature |
PSM Instrumentation Limited | Intelligent Modbus Transmitter | Sensor: High-performance, dual mode liquid level transmitter with 4 to 20mA and Modbus output |
Pulsar Process Measurement Ltd | Sludge Finder | Monitoring Hardware: Sludge Finder 2 is a solution to the problem of accurately measuring interface levels in primary or secondary settlement tanks and SBR systems. Operating ultrasonically through liquid, Sludge Finder 2 uses proven echo processing algorithms to identify the sludge levels. |
QuickSilver Controls Inc. | SilverDust D2 IG8 Servo Controller | AC/DC Drive Control: SilverDust IG8 servo motor controller is designed to allow many controllers to stack on a single DIN rail. With 8 24V I/O (expandable to 15), the IG8 handles most single axis applications. Multiple IG8 controllers can share their I/O and registers with each other creating a peer-to-peer network, or with a single ?master? to create a master/slave network. |
Radix Electrosystems Pvt Ltd | ISOSCAN | Monitoring Hardware: Multi-channel scanner for Temperature, Pressure, Flow, Level, RH, Conductivity, etc. |
RAE Systems | RAEGuard S | Sensor: The RAEGuard S is a permanently installed gas detector for hydrocarbon combustible gases, carbon dioxide and a wide range of toxic gases. |
RLE Technologies | Leak detection panel, LD1500 | Sensor: LD1500 is designed for integration into existing monitoring systems. With SeaHawk Water Leak Detection Cable (SC) and/or zone spot detectors (SD-Z), the LD1500 detects the presence of any conductive fluid and identifies the distance to the leak. Leaks are communicated via various protocols to alarm monitoring and/or notification systems within seconds. |
Rosemount, Emerson Process Management | 3300 Series, Guided Wave Radar Level and Interface Transmitters | Monitoring Hardware: Smart, loop-powered level and interface transmitter, based on guided wave radar technology for measuring liquids and slurries, even under severe conditions |
Rugid Computer, Inc. | RUG3 RTU | Remote Terminal Unit: Remote telemetry unit designed for remote data acquisition and control applications. Numerous hardware and software safeguards are to ensure continued operation in the most demanding field environment. |
Siemens Energy & Automation, Inc. | SENTRON PAC3200 Power Monitoring Device | Monitoring Hardware: Compact control panel instrument that supplies basic data for an overview of where electricity is consumed and where energy flows in the electrical system. |
Softstart UK Limited | RVS-DN Digital Soft Starter | Misc. Hardware: Full Featured, Microprocessor-Based, for Motors 4-2700A, 4-2500KW, 220-1000V Solcon RVS-DN Digital Soft Starter |
Sprint Electric Limited | PL/PLX Digital DC Motor Control | AC/DC Drive Control: Model PL/PLX- Digital DC Motor Control for up To 1850 Amps (800KW/1080HP) |
Stellar Tech Energy Services Inc. | MODBUS Data Logger, MDL 2000 | Monitoring Hardware: The MODBUS Data Logger records and monitors information from a host system, for example a Variable Frequency Drive (VFD), via Modbus RS485. It recognizes and samples 'abnormal' values based on user-defined, predetermined threshold limits, and stores data for user analysis. |
SymCom | CIO-MB Modules | I/O Interface: Modbus-RTU interfaces capable of providing discrete control and monitoring of an overload relay over a Modbus network. |
SymCom | RM-1000 | Monitoring Hardware: RM-1000 is a motor-monitoring device to be used in conjunction with SymCom’s Model 777 MotorSaver®, Model 777-KW/HP PumpSaver®, Model 77C MotorSaver® and Model 601 MotorSaver® via Modbus protocol. |
Unitronics | Jazz Micro PLCs | Controller: The Jazz MicroPLC is a low-budget, full-function PLC with onboard I/O and a built-in Operator Panel. |
WEG | SRW01 Motor Control Series | AC/DC Drive Control: The SRW01 is a low-voltage, electric motor management system. Its modular concept makes it suitable for various applications and allows greater expansion of the relay functions. The Control Unit (SRW01-UC) may be assembled together with the Current Measuring Unit (SRW01-UMC), forming a single unit, or it may be assembled separately (up to 2 meters). |
3S - Smart Software Solutions GmbH | CoDeSys ModBus Library | Software - Programming: The library MODBUS_UDP.lib was implemented for the IEC 61131-3 programming system CoDeSys. |
ABB Ltd | ABB Totalflow FLO 6213 | Misc. Hardware: The Totalflow FLO 6213 is a little sibling to the XFC (eXtendable Flow Computer) and XRC (eXtendable Remote Controller). The FLO 6213 is an accurate and reliable single tube orifice gas flow computer with the capability to measure and monitor gas flow in compliance with AGA and API standards. This unit is supplied with an Integral Multivariable Transducer to measure differential pressure, static pressure and temperature from a single differential pressure meter run. Multiple protocols, including several versions of modbus, are supported. |
ABB Ltd | ABB Totalflow XRC 6490, XRC 6790, XRC 6890 | Remote Terminal Unit: The Totalflow XRC is an expandable electronic remote controller (RTU). These XSeries devices are full-featured units provided without an Integral Multivariable Transducer. Base configuration equipped with standard I/O designed to meet the requirements of many, low-cost measurement and automation projects. Base I/O includes 5 analog inputs, 4 digital outputs and 4 digital inputs; 2 of which can be configured as either status inputs or pulse accumulator inputs. I/O modules can be added to extend the hardware I/O capabilities. Multi-tube capability included with each unit and is invoked with a few configuration changes and interface connection to external transducers, either digital or analog. Users can perform additional programming with standard applications (holding registers and operations) or IEC 61131. Multiple protocols, including several versions of Modbus, are supported. |
ABB Ltd | ABB Totalflow 8000/8100 Btu/CV Transmitter | Misc. Hardware: This 'transmitter - like' natural gas analyzer provides for on-site gas analysis and heating value where conventional chromatograph technology is not practical. Fast analysis cycle and automatic setup features make installation and maintenance easy. Modular design makes mean-time-to-repair as short as a couple of hours. State-of-the-art digital pressure regulator and other electronics allow months between calibrations. Multiple protocols, including several versions of Modbus, are supported. |
ABB Ltd | ABB Totalflow XFC 6410, XFC 6413, XFC 6713 | Misc. Hardware: Totalflow XFC is an expandable electronic flow computer (EFM). The full-featured units are provided with an Integral Multivariable Transducer to measure differential pressure, static pressure and temperature from a single differential pressure meter run. Multi-tube capability is included and is easily invoked with a few configuration changes and interface connection to external transducers, either digital or analog. The standard device includes two analog inputs, two digital outputs, and two state inputs (configurable as either digital inputs or pulse accumulator inputs). I/O modules can be added to extend the hardware I/O capabilities. This unit supports both AGA3 and AGA7 calculations as well as ISO 5167. Valve control and chromatograph interface for real-time gas quality update are standard. Users can perform additional programming with standard applications (holding registers and operations) or IEC 61131. Multiple protocols include several versions of Modbus. |
ABB Ltd | ABB S4C+ Robot Controller | Controller: The S4C+ Robot Controller with the ModBus option allows the Robot to act as both master and slave on the factory ModBus TCP Network. No additional hardware needed to upgrade to ModBus if you are already a S4C+ owner. ABB currently has more than 100,000 robots supplied worldwide. The combination of patented software, precision hardware and total committment results in faster acceleration, as much as 25% better workcycle times, lower energy consumption and a MTBF (Mean-Time-Between-Failure) design specification of 50,000 hours. |
ABB Ltd | RETA-02 PROFINET IO and Modbus TCP adapter | Network Gateway: ABB's RETA-02 PROFINET IO and Modbus TCP adapter enables fast and simple connectivity of ABB drives to a PROFINET IO or Modbus TCP network. |
ABB Ltd | FENA-01 Ethernet Adapter | Network Host Adapter: The FENA-01 Modbus TCP and EtherNet IP adapter expands ABB?s connectivity capability, improving quality, productivity, flexibility and scalability to give machine and system designers the flexibility to select ABB drives independent of the BAC, PLC or HMI manufacturer. Designed for the company?s ACS350 drive line. |
ABB Ltd | ACS850 Drive Modules | AC/DC Drive Control: Flexible AC drives, designed for industrial applications, specifically in process industries such as pulp & paper, metals, mining, cement, power, chemical, and oil & gas. Available with a wide range of internal options such as extended I/O, high-speed communications, and a wide selection of external accessories. |
ABB Ltd | Universal Motor Controller UMC100.3 | Controller: UMC100.3 is a flexible, modular and expandable motor management system for constant-speed, low-voltage range motors. Its most important tasks include motor protection, preventing plant standstills and reducing down time. Early information relating to potential motor problems and swift diagnosis ensure continuous operation of any application. |
ADFweb.com S.r.l. | Datalogger Modbus RTU | Remote Terminal Unit: Remote terminal unit |
Advantage Engineering, Inc. | Advantage Sentra 300 | Controller: The Advantage Sentra 300? temperature control unit provides heating and cooling at elevated temperatures by circulating a temperature stabilized fluid through your process. The unit requires an external source of water for system filling, pressurizing and cooling. The minimum water supply pressure is 55 psi to operate up to 300?F. |
Advantech | ADAM-5510EKW/TP | Controller: The ADAM-5510EKW/TP is an Ethernet-enabled SoftLogic Controller. In addition to the features of ADAM-5510KW and ADAM-5510EKW, the ADAM-5510EKW/TP has Ethernet features including Modbus/TCP Server, Modbus/TCP Client and Multiprog via Ethernet functions. Users can easily and quickly complete their programming based on Ethernet architecture. |
Advantech | ADAM 6000 Series Digital Input and Relay Modules | I/O Interface: High power relay output module designed to meet the requirements of higher voltage applications. |
Advantech | Modbus Gateways, EKI-1221D, EKI-1222D | Network Gateway: Modbus Gateways with built-in Ethernet switches, that provide connectivity between Modbus (ASCII, RTU) serial devices and Modbus TCP equipment. |
Afcon Software and Electronics Ltd. | P-CIM SCADA/HMI | Software - SCADA: Versatile real-time multitasking family of products in SCADA/HMI specializes in industrial control, fire safety, security and building managements systems. P-CIM provides a development environment requiring no programming skills, true web connectivity, networking, communications, data acquisition, alarm management, reporting, and intelligent operator interface. |
Afcon Software and Electronics Ltd. | Pulse SCADA/HMI | Software - SCADA: Pulse is a next-generation platform for the development of industrial, building, and security SCADA/HMI applications. Based on the established and successful P-CIM solution, it implements a client-server architecture, incorporating the latest Microsoft technologies such as .NET Framework to bring increased efficiency, superior visualization capabilities, and a highly reliable platform. |
AGILiCOM | AGILiBASE, AG-P022 | Network Gateway: AGILiBASE is an evaluation board that allows you to test easily and quickly all functionalities of AGILiPLUG modules: Fieldbus connectivity, Modbus RS232/RS485 connectivity, I/O asynchronous serial link, DIAG serial link, Module state indicators, Fieldbus addressing. AGILiBASE integrates all connectors, indicators, switches required to connect AGILiPLUG to your system. The AGILiPLUG range of modules interfaces Modbus equipment to other fieldbuses (e.g., PROFIBUS, DeviceNet, CANopen and Ethernet). |
AGILiCOM | AGILiGATE CANopen/MODBUS, AG-P017 | Network Gateway: AGILiGATE CANopen/MODBUS is a gateway that connecting any MODBUS equipment to a CANopen network. It is a CANopen node on one side and a MODBUS master or slave, on the other side. It is also possible to integrate other protocols on the serial link. AGILiGATE CANopen/MODBUS can drive 50 MODBUS slaves. It can exchange up to 100 MODBUS read registers, and 100 MODBUS write registers. |
AGILiCOM | AGILiGATE PROFIBUS/MODBUS, AG-P011 | Network Gateway: AGILiGATE PROFIBUS/MODBUS gateway allows you to connect any MODBUS equipment to a PROFIBUS DP fieldbus. It is a PROFIBUS DP slave on one side, and a MODBUS master or slave, on the other side. It is also possible to integrate other protocols on the serial link. AGILiGATE PROFIBUS/MODBUS can drive 20 MODBUS slaves. It can exchange up to 244 bytes of inputs, and 244 bytes of outputs on PROFIBUS. |
AGILiCOM | AGILiPLUG PROFIBUS/MODBUS, AG-P001 | Network Gateway: AGILiPLUG PROFIBUS/MODBUS is a PROFIBUS DP slave. On the MODBUS side, it can be parameterized as a master or a slave. In master mode, AGILiPLUG can communicate with up to 20 MODBUS slaves. AGILiPLUG fits into a DIP 32 socket. It is added on a motherboard instead of a traditional RS232/485 driver. AGILiPLUG also features a synchronous link for direct command of up to 48 I/Os. |
AGILiCOM | AGILiPLUG CANopen/MODBUS, AG-P007 | Network Gateway: AGILiPLUG CANopen/MODBUS allows your MODBUS equipment to become a CANopen node. The basic version is a CANopen Slave, and MODBUS master or slave. It is also possible to integrate other protocols on the serial link. AGILiPLUG CANopen/MODBUS is similar to a bus driver. It is added directly between an UART and the CANopen connector (Sub-D9, mini, micro, open?). It fits into a DIP 32 socket. AGILiPLUG CANopen/MODBUS also features a synchronous link to access up to 48 digital inputs/outputs. AGILiPLUG CANopen/MODBUS is like an electronic component and no programming is required to integrate it into your host system. All parameters are set via CANopen configuration tool. The configuration objects are downloaded in the AGILiPLUG module, by using SDO services, and are stored into a flash memory. |
Alerton | FLG-Modbus BACtalk Gateway | Network Gateway: The Alerton FLG-Modbus is a field-level gateway that resides on a BACnet MS/TP network and connects to Modbus over EIA-232 or EIA-485, translating Modbus data to BACnet AVs and BVs. |
Allied Motion Controls | EnduraMax 75i | AC/DC Drive Control: EnduraMax 75i series are 75 mm (2.95 in) diameter integrated brushless DC motor-drives intended for torque, speed and/or position control in applications such as valve actuators, rotary and linear actuators, conveyor drives, AGV vehicle traction or steering, and similar commercial/industrial applications. |
Allmendinger | Modbus Serial Modem | Software - Other: Process Communications Channel-DLL for Simatic WinCC? |
AMASS Data Technologies Inc. | Embedded Control Digital I/O Module | I/O Module: The ECDIO Digital I/O Module is a compact DIN-Rail mountable, full-function, digital I/O subsystem that is compatible with the following RS485 multi-drop networking protocols: AMASS Data?s ECN, SDI-12/RS485 and Modbus RTU. The ECDIO provides firmware-based intelligent digital I/O functions for its 24 I/O lines and uses the ECN, which supports up to 32 modules over a distance of 4000 feet on single or dual twisted pair cable. |
AMASS Data Technologies Inc. | PSE/RTU Shaft Encoder | Sensor: PSE optical shaft encoders are intelligent sensors providing data through a communications port (SDI-12, Modbus RTU, ...) in engineering units using user-programmable OFFSET and SCALE (units per revolution) settings. Hardware includes a +10.5 to14V input for external battery, charger or solar panel and a 9 V alkaline battery to provide a total of approximately 240 hours of backup in the event of power supply interruption. The shaft is mounted on precision, zero-resistance bearings and is compatible to our pulleys. |
AMASS Data Technologies Inc. | Analog to Digital Conversion Module, PAIM | I/O Module: The AMASSER PAIM is an 8-channel analog input module in the form of a standalone SDI-12 device providing A/D conversion (16-bit resolution) as well as excitation ports. It also includes 3 channels for period measurements and 3 for frequency measurements. The PAIM provides an interface for SDI-12 loggers that are to be connected to various non-SDI-12 sensors, such as for weather monitoring. This A/D converter is a standard feature on our PDAS-II data loggers. |
American Industrial Systems Inc. | Operator Interface Terminal PC | HMI Hardware: 10.1' Operator Interface Terminal PC designed for Building, Factory, and Industrial Automation. |
American Industrial Systems Inc. | Touch Panel PC | Controller: 7 inch widescreen fanless touch panel PC designed for building, factory automation, SCADA, and human-machine interface (HMI) applications. |
AMETEK Land, Inc. | Emerald Data Acquisition and Reporting System | Software - SCADA: Emerald is a flexible and configurable data acquisition and reporting system for continuous emissions monitoring. |
Antaira Technologies | STM-501C Gateway | Network Gateway: Modbus TCP to Serial RTU/ASCII Gateway that allows legacy Modbus RTU/ASCII devices to operate on a Modbus TCP network. It allows Modbus serial masters or slaves to communicate with Modbus TCP slaves or masters. |
Anton Paar Germany GmbH | L-Dens 427 | Sensor: Compact density sensors for continuous measurement of density, concentration and API gravity |
Antx, Inc. | Elite Gas Controller | Controller: The Elite Gas Controller is a system manager for detecting toxic gases, combustibles, or oxygen hazards. |
APEX Automation Technologies GmbH | PAD-250e, Models 20102050, 20102051, 20102052, 20102053 | Controller: The PDnetIP-Controller PAD-250e is an active PAB1-networking node. The PDnetIP-Controller PAD-250e is applicable in Schneider Electric's Modicon TSX A 250. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with an 100Base-FX MT-RJ connector and Modbus TCP, ICOS/TCP and RFC-1006 the PAD-250e provides communication to diverse terminal devices. Additional interfaces for the PAD-250e Controller satisfy many requirements for open communication networks. Configuration is done with the APEX-Software NetPro in advance and is stored in the non-volatile setup memory of the PAD-250e controller. Either the communication between the PAD-250e Controller and SPS will be handled via the provided Special Function Blocks (SFB) or the controller substitutes Modnet-Controller types BIK-114, KPH-141 and KPM-111 for ICOS-communication. |
APEX Automation Technologies GmbH | PAD-120e, model 20102030 & 20102032 | Controller: The PDnetIP-Controller PAD-120e is an active PAB1-networking node. The PDnetIP-Controller PAD-120e is applicable for Schneider Electric's Modicon TSX Compact A120. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with an 100Base-FX MT-RJ connector and Modbus TCP the PDnetIP-Controller PAD-120e allows communication with diverse terminal devices. The necessary information for communication is configured by the APEX-Software NetPro in advance and is stored in non-volatile memory. Communication between the PAD-120e Controller and SPS is handled via Special Function Blocks (SFB). |
APEX Automation Technologies GmbH | PAD-740e, models 10102020 & 10102022 | Controller: The PDnetIP-Controller PAD-740e is an active PAB1-networking node for the Siemens S7-400. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with a 100Base-FX MT-RJ connector and the protocols Modbus TCP, RFC-1006 and VDM, the PDnetIP-Controller PAD-740e allows communication with diverse terminal devices. The necessary information for communication is configured by the APEX-Software NetPro in advance and stored in the non-condensing setup memory of the PDnetIP-Controller. Communication between the PAD-740e Controller and SPS is handled via the provided Special Function Blocks (SFB). |
APEX Automation Technologies GmbH | PAD-250MAe, models 20102090 & 20102092 | Controller: The PDnetIP-Controller PAD-250MAe is an active PAB1-networking node. The PDnetIP-Controller PAD-250MAe is applicable in the DTA-112 and DTA-113 rack. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with an 100Base-FX MT-RJ connector and Modbus TCP, the PDnetIP-Controller PAD-250MAe allows communication to diverse terminal devices. Additional available interfaces for the PAD-250MAe satisfy many requirements for open communication networks. Configuration is done with the APEX-Software NetPro in advance and is stored in the non-condensing setup memory of the PDnetIP-Controller. Communication between the PAD-250MAe Controller and DTA is handled via PAB1-Interface. |
APEX Automation Technologies GmbH | PAD-140e, PAD-140twin, models 20102070, 20102071, 20102072 & 20102073 | Controller: The PDnetIP-Controller PAD-140 is an active networking node for Schneider Electric's Modicon Quantum 140. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with an 100Base-FX MT-RJ connector and Modbus TCP, RFC1006 and OpenTCP, the PAD-140 affords the communication to diverse terminal devices. Additional available interfaces for the PAD-140 satisfy many requirements for open communication networks.The installation of the PAD-140 is easy, simply plugging into the base rack of the SPS. |
APEX Automation Technologies GmbH | PAD-5035e, Models 20102040, 20102041, 20102042, 20102043 | Controller: The PDnetIP-Controller PAD-5035e is an active PAB1-networking node applicable in Schneider Electric's Modicon A350/A500. Equipped with an Ethernet 10/100Base T RJ45 connectors and optionally with an 100Base-FX MT-RJ connector and Modbus TCP, ICOS/TCP and RFC-1006 the PDnetIP-Controller PAD-5035e communicates with diverse terminal devices. Additional available interfaces for the PAD-250MAe satisfy many requirements for open communication networks. Configuration is done with the APEX-Software NetPro in advance and is stored in the non-condensing setup memory of the PDnetIP-Controller. Communication between the PAD-5035e Controller and SPS will be handled via the provided Special Function Blocks (SFB) or the controller substitutes the Modnet-Controller types BIK-151, KP1, KOS 152 (SEA 1) and KOS 882 (SEA 1) for ICOS-communication. |
APEX Automation Technologies GmbH | PAD-800e, Models 20102060, 20102061, 20102062, 20102063 | Controller: The PDnetIP-Controller PAD-800e is an active PMB-networking node. The PDnetIP-Controller PAD-800e is applicable in the LOGISTAT CP80-A800/Logidyn D. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with an 100Base-FX MT-RJ connector and Modbus TCP, ICOS/TCP and RFC1006 the PDnetIP-Controller PAD-800e communicates with diverse terminal devices. Additional available interfaces satisfy many requirements for open communication networks. Configuration is done with the APEX-Software NetPro in advance and is stored in the non-condensing setup memory of the PDnetIP-Controller. Communication between the PAD-800e Controller and SPS is handled by the provided Special Function Blocks (SFB) or the controller substitutes the Modnet-Controller type SEA 1 in terms of an ICOS-communication. |
Apollo Fire Detectors Limited | OpenConnect Gateway | Network Gateway: OpenConnect Gateway® fully integrates fire detection with building management systems (BMS), without the need for complex systems or the use of multiple customised interfaces. |
Arcom | HtNode | Network Gateway: Provides a single channel HART to Modbus transmitter interface capable of working in point-to-point or multi-drop HART mode connecting up to 15 transmitters. Embedded program automatically controls the HART interface of the HtNode by polling connected HART devices and storing the information in Modbus registers. An RS232 communications port with RTS/CTS handshaking is provided for connection to devices polling in Modbus RTU Protocol |
Arcom | HtMux | Network Gateway: 8 to 56 channel HART fieldbus gateway device that interfaces a network of HART compatible devices to a Modbus Host computer. System configuration features provide setup for many different control schemes and system requirements. |
Arkon Flow Systems, s.r.o. | MAGB1 flowmeter | Monitoring Hardware: The MAGB1 is a battery powered electromagnetic flowmeter. |
Ascon Tecnologic Inc. | gammadue series J1/J3 Color Indicators | Misc. Hardware: The J1 is a General Indicator and the J3 a Process Indicator |
Ascon Tecnologic Inc. | DY Ethernet Gateways and WEB Servers | Network Gateway: The DY Ethernet Gateway provides a protocol conversion from Modbus TCP to Modbus RTU. The WEB server monitors and controls serial devices using a standard web browser; designs the graphical user web interface without Windows tools or HTML editors; manages alarms by e-mail or SMS; performs specified local data logging. |
Ascon Tecnologic Inc. | H Series Humidity Transmitters (H3, H5) | Sensor: Humidity and Temperature Transmitters |
Ascon Tecnologic Inc. | Microprocessor-Based Thyristor Power Controllers (TH-S, TH-A, and TH-P) | Controller: Complete set of single-phase, three-phase economy, and three-phase power controllers with a wide range of nominal voltages and currents. Different operation modes allow use with any type of load, Internal diagnostic and load monitoring functions ensure safe operation. |
Ascon Tecnologic Inc. | sigmaPAC Programmable Automation Controller | Controller: Distributed automation solution with fieldbus |
Ascon Tecnologic Inc. | sigmadue Series I/O Modules | I/O Module: Modbus remote I/O modules |
Ascon Tecnologic Inc. | AC Series Multifunction PLCs | Controller: A Multiloop controller, Micro PLC for logic sequences, a powerful Process Computer combined in one instrument. |
Ascon Tecnologic Inc. | DeltaDue DIN Rail Controllers (D1, D2, D3, D7, D8, and D9) | Controller: Product family of temperature controllers with data acquisition and I/O modules |
Ascon Tecnologic Inc. | Gamma2 Panel Mount Controllers (C1, M1, M2, M3, M4, M5, X1, X3, X5, Q1, Q3, and Q5) | Controller: Family of Universal Controllers, Set-point Programmers-Controllers, and Indicators |
ASV Stuebbe GmbH & Co. KG | Pressure and Temperature Transmitter, PTM | Sensor: Pressure and Temperature Transmitter for aggressive and corrosive fluids, the PTM sensor is specially designed for pump monitoring, to shut down pumps, if the pump pressure or temperature leaves the defined save working window. The PTM is also useful for pressure and temperature range monitoring in other processes. |
ASV Stuebbe GmbH & Co. KG | Ultrasonic Level Transmitter, UFM | Sensor: An ultrasonic tank filling level Transmitter for aggressive and corrosive fluids, the UFM ultrasonic level sensor with its digital signal processing technology delivers an accurate and reliable, non-contact measurement of chemicals, water and wastewater. |
ASV Stuebbe GmbH & Co. KG | Hydrostatic Level and Temperature Transmitter, HFT | Sensor: As a hydrostatic tank filling level and Temperature Transmitter for aggressive and corrosive fluids, the HFT sensor uses the hydrostatic pressure of fluids, to calculate the fill level and volume of tanks up to 100000l total. The volume calculation can be done with linear tanks and spherical and horizontal cylinder tanks as well. |
Athena Controls, Inc. | Series DS Digital Staging Controller | Controller: The Series DS Digital Staging Controller is capable of driving contactors for up to ten heaters or cooling devices to maintain a process at setpoint. |
ATI | D12-IR Combustible Gas Transmitter | Sensor: ATI?s Series D12 gas transmitter line includes a versatile infrared system that can be configured for LEL or select toxic gases. The D12-IR uses a compact IR sensor in a corrosion-resistant housing with sintered flame arrestor to meet hazardous area classification requirements. |
Audon Electronics | Temperature/humidity Monitor, H0530, H3530 | Monitoring Hardware: Ethernet solution for temperature or humidity monitoring and alarming |
AUMA Riester GmbH & Co. KG | AUMATIC | AC/DC Drive Control: The AUMATIC with a Modbus RTU interface facilitates integration of AUMA actuators in Modbus network systems. It can be installed in both the weatherproof and the explosion proof versions of the AUMATIC actuator controls thus supporting a wide variety of different AUMA actuator types such as multi-turn actuators, part-turn actuators or linear actuators, all suitable for most arduous environments and hazardous areas. |
Automatic Timing & Controls, Diversified Electronics Division | MotorGuardian, MPA-1000 | Misc. Hardware: Microprocessor-based overload relay, designed to provide protection for 3-Phase AC motors. It offers a broad range of features in a compact package for monitoring and managing motor performance. |
Automationdirect.com | T1K-MODBUS | Controller: Modbus RTU Base Controller for Terminator I/O base, for connection to Modbus RTU master. |
Avista Realtime Systems, LLC | NetPro-ModServLite | Software - Programming: This code library helps developers build a Modbus TCP Server (slave) solution. The code allows you to emulate multiple Modbus RTUs in the same application domain. The RTUs data is gathered from local/distributed I/Os or by interfacing with other communication protocols such as DNP3 or OPC. The solution is good for building a PC-based RTU, RTU simulator, protocol convertor, data concentrator or smart Modbus gateway. The package comes with a complete set of developer's manual, 30 minutes full featured free library, 3 months support and example solutions to demonstrate how to use the code. |
Axon Group Ltda | Axon Builder, AGAB512 | Software - SCADA: Axon Builder is simple SCADA software with many communication protocols and tools. It provides flexible and real-time supervision, control, acquisition and information processing of a whole control system. Axon Builder provides whole process visualization, storage, control supervision, and processes date administration. |
AzeoTech, Inc. | DAQ Factory | Software - SCADA: DAQFactory data acquisition, process control and data analysis software provides all the software tools you need to communicate with a wide variety of data acquisition devices, from Serial RS232 to OPC to DAQ cards to LabJack USB devices to Modbus devices. |
B&B Electronics Mfg. Co. | Modbus TCP to Modbus Converters, MES1A and MES1B | Network Gateway: MES1A and MES1B Modbus TCP to Modbus ASCII/RTU converters connect new and existing Modbus ASCII/RTU serial devices to TCP/IP networks. The MES1A provides this connection for Modbus devices with RS-232 interfaces; the MES1B facilitates Modbus devices with RS-422 four-wire point-to-point interfaces, or RS-485 four or two-wire multi-drop bus connections. |
B&B Electronics Mfg. Co. | Model FOSTCDR | Network Gateway: The FOSTCDR provides connection between any asynchronous full or halfduplex serial equipment using dual multi-mode fiber optic cable. The converter can also be set up in a multidrop mode to allow one serial device to communicate with multiple devices around a fiber ring. |
b-plus GmbH | Smart_MOD | I/O Interface: Smart_MOD easliy connects devices and systems with a serial RS-232 interface to Modbus |
Bachmann electronic | M1 (M200 series) | Controller: Industrial controller family (M200 series) consists of a full range of individual modules connectable via a backplane to customized automation solutions. All popular analog and digital I/O signal levels as well as functional modules for PWM, counting, positioning or advanced data acquisition are available. |
Baldor Electric Company | MicroFlex e150 Ethernet Servo Drive Family | AC/DC Drive Control: The MicroFlex e150 Ethernet servo drive family has four single-phase options offering output powers of 1.5, 3, 6 or 9 A. |
Baldor Electric Company | MotiFlex e100 | AC/DC Drive Control: Ethernet POWERLINK AC Drive (Servo/Vector) |
Balluff GmbH | BIS C/L/M and S identification systems | Sensor: Ethernet solution for Balluff RFID system families with Ethernet TCP/IP and the realtime variants EtherNet/IP, Modbus TCP. Balluff BIS C/L/M and S identification systems are compatible with all the common network technologies currently favored by the large automobile manufacturers. |
Barix AG | Barix X8 | I/O Interface: Decentralized, digital Modbus I/O to RS-485 converter |
Barix AG | Barix IO12 | I/O Module: Digital I/O unit for remote I/O automation |
Barix AG | Barix R6 | I/O Interface: DIN-rail mountable Modbus RTU relay unit for building and industrial automation |
Barix AG | Barionet 50 | Controller: Low-cost IP automation controller, monitoring device, and visualization system |
Barnett Engineering Ltd | ProTalk SPX | Monitoring Hardware: The B1275 ProTalk SPX voice auto dialer helps to avoid costly downtime and disasters by providing your key personnel with early notification of trouble conditions with their critical equipment. The ProTalk SPX connects to MODBUS or Allen Bradley DF1 devices through its serial port, and monitors the system registers for abnormal conditions. In the event of an alarm, the SPX can alert the necessary people through any combination of radio, telephone, or pager callout. |
Beckhoff GmbH | Modbus Bus Terminal Controller, BC7300 | Controller: Beckhoff's Bus Terminal Controllers are Bus Couplers with integrated PLC functionality. The BC7300 controller has a fieldbus interface for Modbus, which can be used as a non-central intelligence in the Modbus system. The Bus Terminal Controllers are intelligent slaves. One unit consists of a Bus Terminal Controller, any number of terminals between 1 and 64, and a bus end terminal. |
Bee Instruments (Madhu Group of Companies) | Programmable On/Off Controller, FC96A | Controller: Programmable on/off controller |
Beluk GmbH | EMM Power Analyzer | Monitoring Hardware: 3-phase/3 or 4 watt power measurement instrument |
Beluk GmbH | Power Factor Control Relay BLR-CM | Misc. Hardware: Compensation of reactive power with fully automatic recognition and supervision of capacitors; Intelligent regulation algorithm guarantees optimum choice of steps and short compensation times; No settings are necessary for commissioning of the regulation function |
Beluk GmbH | Capacitor-Protecting Relay KSR | Sensor: The KSR supervises capacitor banks, detects overload, over- and under-voltage, and provides out-of-balance detection at doublestar- and H-circuits. |
Benedict Computer | DLM400 | Software - Testing and Simulation: The DLM400 is a window/data spy into all requests and response frames passing between two or more devices on a serial Modbus circuit. It supports RS-485, RS-422, and RS-232. Additionally, the DLM400 supports MIL-Std-188-114 monitoring, testing, and RS485 simulation. Analyzer is small, battery-powered, light weight and portable. |
Bentek Systems Ltd. | SCADALink IP100 | Network Gateway: The SCADALink IP100 enables IP access to serially connected devices such as PLCs, RTUs, SCADA hosts, Flow Computers, Data Loggers and Radio Modem systems. The IP100 is a Serial-to-Ethernet Gateway, Multiport Industrial Terminal Server and Modbus Multiplexer designed for SCADA and automation applications requiring serial connectivity of LAN/WAN and Internet Networks. Unique features such as multiple host connections and simultaneous TCP, UDP and Modbus TCP ports give it flexibility and scalability in automation and SCADA applications. A built-in Monitor tool enables serial communications diagnostics by providing users with real-time protocol analysis capabilities on selected serial channels. |
Bihl+Wiedemann GmbH | AS-i/Modbus Gateway in Stainless Steel | Network Gateway: AS-i/Modbus Gateway in stainless steel |
Black Mountain Controls | MT1 Modbus | I/O Module: The MT1 Modbus converts 4 analogue input signals to digital data, based on Modbus RTU and transmits them via RS485. The 4 inputs are selectable from current, voltage, resistance and temperature. Any combination of inputs is possible from one input of each type to 4 times the same input. The MT1 has a USB port for easier settings and firmware updates. |
BlueLevel Technologies, Inc. | Model WC Inventory Monitoring Sensor | Sensor: Model WC inventory monitoring sensors are third-generation smart weight & cable style instruments using a proven technique for measuring the distance from the sensor to the surface of the target material. The Model WC uses Hall-effect technology to measure the distance/level, eliminating the need for optical devices that may be susceptible to dust and dirt through normal use or during installation. The Model WC uses the latest weight & cable technology to provide reliable and accurate inventory measurement information for powders, granular and liquid materials. |
Bosch Rexroth AG | Frequency Converter Fe | AC/DC Drive Control: Frequency converters for open-loop applications |
Brainchild Electronic Ltd. | IO 6RTD ( 6 RTD inputs ) | I/O Module: Modbus-based I/O modules for data acquisition and other applications |
Bronkhorst High-Tech B.V. | IN-FLOW Mass Flow Meters | Monitoring Hardware: Thermal mass flow meters of modular construction with a 'industrial style' pc-board housing. |
Bronkhorst High-Tech B.V. | MASS-STREAM Series D-6300 | Sensor: The digital MASS-STREAM® series D-6300 works on the basis of direct through-flow measurement, following the constant temperature anemometer principle. The model series extends from 0.01Ln/min to 0.2Ln/min at the lowest scale to 100Ln/min to 5,000Ln/min at the highest range, with a turndown ratio of up to 1:100. |
CAS | Modbus Measurement | Software - Other: A tool for testing communication over Modbus protocol. |
CAS | CAS CommServer | Software - OPC: Configurable OPC server providing multi-protocol, multi-medium and multi-channel redundant access to physical process control device data. CommServer offers the possibility of using many communication protocols simultaneously, parallel handling of independent communication channels and redundant links with remote physical devices. Users can define logical sets of devices (segments) with common address or scanning rules. New protocols can be added with plug-ins. It provides the possibility of using various communication media simultaneously, including copper and fibreoptic wires, digital radio, ISDN, GSM and satellite transponders. Physical data communication network is monitored and the acquired diagnostic data are provided as OPC tags. |
CAS DataLoggers | Accsense PR Series Paperless Recorders | Remote Terminal Unit: Accsense PR series Paperless Recorders offer direct replacement of paper-based strip chart and circular chart recorders for industrial applications. |
Chromalox®, Inc. | Multiloop Controller 3340 | Controller: The 3340 can control up to 4 channels in a compact 1/4 DIN package. The 3340 has a straight forward user interface that does not require a PLC programmer or other support hardware to operate. The display, pushbuttons, outputs and software are integrated in this single multi-loop package. |
Cimetrics Inc. | BAS-o-matic - Protocol Analyzer | Software - Testing and Simulation: BAS-o-matic captures and analyzes Internet and LAN data traffic in an IT, Building Automation, or Industrial Automation Network. Supports Ethernet, BACnet/Ethernet, BACnet/IP, BACnet MS/TP, Modbus/TCP, Modbus RTU. Can be used to verify proper communications between automation devices and to debug system problems. |
Cimetrics Inc. | B2000 - Modbus TCP/RTU Router | Network Gateway: A B2000 router connects Modbus TCP and Modbus RTU networks. B2000 is a part of the E+ series of applications solutions. These solutions integrate various protocol devices with the existing Building Automation Systems. |
CimQuest INGEAR | INGEAR Modbus OPC Server | Software - OPC: INGEAR Modbus OPC Server provides connectivity to devices such as sensors, meters, I/O modules and programmable logic controllers that use the Modbus protocol. |
Clark Solutions | Model DN-EM BTU/Energy Monitor | Monitoring Hardware: The DN-EM is a an energy flow monitor intended for applications in energy transfer and heating/ cooling systems where energy use requires measurement. |
CMC Industrial Electronics | Modbus Actuator Controller mAC185-MB | AC/DC Drive Control: The mAC185-MB is an application specific controller, designed to position any device that uses discrete open/close signals and rotary or linear feedback. |
Codra | Panorama E² | Software - SCADA: Panorama E² is a high-end technology control system through which real-time information is collected, analysed and visualised on any type of device, for any purpose. Panorama helps you to reduce energy usage, improve productivity, product quality and customer service. |
Cognex Corporation | In-Sight Vision Sensors | Sensor: Networkable vision sensors |
ComAp, spol. s.r.o. | I-CB/Modbus | Network Gateway: Versatile programmable interface unit between InteliGen NT, InteliSys NT, InteliSys or InteliDrive controller and any Modbus RTU device |
COMET System, s.r.o. | Ethernet Sensor | Sensor: Intelligent humidity, temperature and dew point probe with Ethernet interface. |
Compressor Controls Corp | Series 5 Reliant Turbomachinery Controllers | Controller: Purpose-built, Fixed I/O-configuration controllers with IEC-61131 Programming Languages |
Computer Technology Concepts | CTC Powerstations | HMI Hardware: CTC PowerStations are designed to withstand factory conditions including electrical noise, mechanical shock and vibration, high temperature and humidity levels. Testing also includes EMI (electromagnetic immunity), detailed thermal, shock and vibration analysis and hosedown testing. |
ConsoliTech Corp | OPC HMI Package | Software - OPC: Visual Basic industrial control development toolkit to link your application to the factory floor PLC. |
Control Microsystems Inc. | SCADASense 4102 | Monitoring Hardware: Optimized for use with Control Microsystems? SCADAPack controllers and configurable through its RealFLO Gas Flow Computer software, the SCADASense 4102 is a single transmitter designed for multiple applications. |
Control Systems International, Inc. | UCOS Field Control Unit (FCU) | I/O Interface: The UCOS Field Control Unit directly scans and controls multiple brands of I/O modules and executes event-driven logic. |
Control Technology Corporation | Ethernet Card, Model 2717 | Misc. Hardware: The Model 2717 Ethernet card is your controller's window into the enterprise, with the power to integrate the controller's resources with everything from robots to CRM. In addition to the TCP/IP commonly used for Internet access, the 2717 supports a wide variety of other protocols including UDP and Modbus, for easy and flexible integration with other systems on the network. The 2717 Ethernet card supports a DLL that uses TCP/IP and UDP to communicate directly with the CTC controller over secure connections. This enables authorized users to remotely transfer new control strategies to the controller over the Internet, streamlining activities such as system upgrades/enhancements, customization, or diagnostics from remote locations. The 2717 has an on-board flash file system for program and documentation storage. Files can be transferred to and from the controller using FTP. |
Control Technology Corporation | Blue Fusion Automation Controller, Model 5100 | Controller: The Blue Fusion family of web based controllers, combines fully configurable I/O, motion control and enterprise connectivity into a single compact package at a price that's lower than many non-networking controllers. With built-in 10/100 Base T Ethernet, the 5100 supports the protocols that put your devices on the Web over secure connections, including: HTTP, SOAP, SMTP, RMI, Modbus/TCP, XML & SQL. |
Control Technology Corporation | Blue Fusion Automation Controller Model 5200 | Controller: The Blue Fusion 5200 is a high-performance programmable automation controller designed for industrial discrete and process control applications. CTC's Blue Fusion controllers combine the features of a PLC, motion controller and PC into a small DIN rail mountable package. The controller can be used in a stand-alone configuration or it can be easily networked via its serial and LAN connections. The built-in Web server makes Internet or intranet access a snap. For larger applications, the 5200 supports up to three expansion racks allowing over 192 I/O points to be managed by a single system. The 5200 Supported IT and Web Standards are: HTTP, SMTP, POP3, Modbus/TCP, XML, SOAP, & SQL/JDBC. |
Control Technology Corporation | Blue Fusion Model 5223 Controller | Controller: The Blue Fusion model 5222 and 5223 automation controllers use patented CTC technology to serve up interactive web-based HMI projects. The projects are created on a PC using CT HMI Builder, CTC's graphical development software. Once the project has been created, CT HMI Builder converts the project to a CT webHMI project and exports it directly to the Blue Fusion controller. The CT webHMI project in the controller can then be accessed by any number of authenticated users via standard web browsers. |
Control Technology Corporation | CTServer Software | Software - HMI: CTServer provides a direct, web-based link between the factory floor and enterprise systems such as MRP (Material and Resource Planning), CRM (Customer Relationship Management), documentation and quality analysis. CTServer offers a wealth of innovative features designed to significantly improve your ability to capture and deploy information from process and production assets, and to make that information instantly available to local and remote users, resulting in reduced operating costs, reduced IT expenditures, reduced downtime, and increased productivity. |
Control Technology Corporation | Series 2700AP Series Automation Controller | Controller: The 2700 Series programmable automation controllers use advanced technology, including a highly integrated plug-in CPU, to attain performance that exceeds the response metrics of much more costly systems. This performance level, combined with the controller's 128K user memory capacity and extended I/O and step capacities, makes the 2700 Series appropriate for any application that demands ultra fast response times or real-time, multitasking machine control. A multi-processor architecture distributes the workload, thereby increasing system performance. Multitasking for up to 84 independent tasks and advanced motion control commands enable you to design sophisticated solutions for the most complex applications. |
Control Technology Corporation | Model 5222 Blue Fusion Web Enabled Controller | Controller: The Blue Fusion Model 5222 is a high performance programmable automation controller designed for industrial discrete and process control applications, which also has an embedded web server. CTC's award winning Blue Fusion Model 5222 controllers combine the features of a PLC, motion controller and web server into a small DIN rail mountable package. The Model 5222 has powerful networking and control features including CT HMI support, data logging, FTP client support and 5 MB flash memory. Using the 5222, one can remotely set up, control, and maintain complex control applications over Internet or Intranet connections, using no more than a web browser. The 5222 supports up to 192 I/O points or 12 axes of servo and stepper motion, alarm-generated emails and embedded video and customization via C/C++ providing a rich and flexible control strategy. |
Control Technology Corporation | Blue Fusion Model 5300 Controller | Controller: The Blue Fusion Model 5300 is a high performance programmable automation controller designed for industrial discrete and process control applications. CTC's award winning Blue Fusion controllers combine the features of a PLC, motion controller and PC into a small DIN rail mountable package. The controller can be used in a stand-alone configuration or it can be easily networked via its serial and LAN connections. The built-in web server makes Internet or intranet access a snap. For larger applications the Model 5300 supports up to 1024 I/O points and up to 16 axes of motion control. |
ControlByWeb (Xytronix Research and Design, Inc.) | X-DAQ-8A5-I | I/O Module: The X-DAQ-8A5-I Analog Module is an industrial-grade, Ethernet data acquisition module with eight analog inputs. Users can view the value of the analog inputs using a web browser or a custom application. The Analog Module can be set up to accept either eight single-ended analog signals, four differential analog signals, or a combination of single ended and differential inputs. |
ControlByWeb (Xytronix Research and Design, Inc.) | DAQ Series Five Input Module | I/O Module: The DAQ Series Five Input Module comes equipped with five opticallyisolated, digital inputs. Each input can be used to monitor the state of a digital signal. The inputs can be used to trigger email alerts based on a single change of state or after a number of state changes. The inputs can also be used as counters, or to control the relay contacts of other ControlByWeb? products that are located in remote locations. |
ControlByWeb (Xytronix Research and Design, Inc.) | Temperature Module X-DAQ-2R1-4T-I | I/O Module: The DAQ Series Temperature Module can be used to monitor temperatures within the range of -55C to +125C. It can monitor up to four different temperature sensors. It also is equipped with two electro-mechanical relays that can be triggered using a temperature value, controlled independent of temperature and independent of each other. |
ControlByWeb (Xytronix Research and Design, Inc.) | WebRelay, X-WR-1R12-1I24-I | I/O Module: WebRelay is an electro-mechanical relay with a built-in web server. It can be controlled and/or monitored over any IP network. Users can also operate WebRelay? without user intervention. WebRelay? also can be operated by using the optically isolated input. The input can be configured to turn the relay on/off, pulse the relay, toggle the relay, latch the relay, etc. The input can also be used to control a relay at a remote location or simply monitor the status of a digital signal. |
ControlByWeb (Xytronix Research and Design, Inc.) | WebRelay-Quad, X-WR-4R1-I | I/O Module: WebRelay-Quad is a compact four-relay module with a built-in web server. It can be controlled and/or monitored over any IP network including private networks, IP-based industrial control networks, and the Internet. Users can also use a custom application to control and monitor the device. WebRelay-Quad has four low-signal relays that can individually switch up to 1 Amp at 28V. |
ControlByWeb (Xytronix Research and Design, Inc.) | X-300-I | I/O Module: The X-300 is a powerful web-based instrument for remote temperature measurement, logging, and alarming. In addition, the X-300 can function as a full-featured 7-day programmable thermostat for single stage HVAC systems. |
ControlByWeb (Xytronix Research and Design, Inc.) | WebRelay-Dual, X-301-24I | I/O Module: WebRelay-Dual is an Ethernet-based, high-performance, mini I/O module that has two electro-mechanical relays, two optically-isolated inputs, nonvolatile memory for logging, and a real-time clock for full-calender scheduling. Users can manually operate the device, or configure it to automatically turn relays on/off at preset times. |
Coyote DataCom, Inc | RIO9 Multi-IO Board | I/O Module: The RIO9 Multi-IO board provides an easy way to use any of the radios in the CDR-915 family to transmit analog and digital signals. All I/O features transient protection against damage. |
Coyote DataCom, Inc | RIO-10 Multi IO Board | I/O Module: The RIO-10 Multi-IO board provides an easy way to collect analog and digital signal information and in many instances can completely eliminate the need for an RTU at remote points. All I/O has transient and over voltage protection. |
Crestron Electronics, Inc. | GLA-BMS Protocol Translator | Network Gateway: The Crestron GLA-BMS is an Ethernet based protocol translator that allows a Crestron system to communicate directly with any number of building management protocols. |
Curry Controls Company | Modpac RF Modem | Modem: Full-featured packet radio communications controller |
Cybectec Inc. | SMP 16/CP | Network Gateway: The SMP 16/CP communications processor can serve as a Protocol Translator, Data Concentrator, Terminal Server / Serial Port Switch, Automation Processor. It supports DNP3, IEC 60870-5-101/103/104, IEC 61850, UCA 2.0, ICCP, MODBUS, SEL, and most electrical industry proprietary protocols. |
CyberLogic Technologies, Inc. | MBX Family | Software - Device Driver: The MBX Family of products provides connectivity to devices on Modicon-based networks. Modbus, Modbus Plus, and Modbus TCP/IP are all supported. Applications can interface with plant-floor devices using a variety of communication layers, such as OPC, Modicon?s NETLIB, and the high performance MBX API. With the MBX Family of products, even DOS and 16-bit Windows software (e.g, Modsoft, Concept) can be used with the latest versions of Windows. |
DAE Instrument | SIO270 | I/O Module: The SIO series is a distributed I/O solution with modular construction for maximum flexibility. Its powerful on-board intelligence makes it well suited to SCADA applications. The quick release plug in I/O modules are fully isolated (input to power, output to power ) and surge protected for high system reliability. |
Daniel Measurement and Control | Model 3804 Liquid Ultrasonic Flow Meter | Sensor: The Daniel Model 3804 Ultrasonic Flow Meter is the first in the Daniel Series 3800 family of liquid meters. The Daniel Model 3804 is a four-path, in-line ultrasonic meter that measures transit times of ultrasonic pulses passing through the liquid on four parallel planes. Each path has two integrally mounted ultrasonic transducers. The pair of transducers act alternately as transmitter and receiver. The difference in transit times of the downstream-directed pulses and the upstream-directed pulses is directly proportional to the measured fluid velocity. With no moving parts, the meter is ideal for bi-directional measurement as it provides accurate measurement of both upstream and downstream transit times. |
Data Comm for Business Inc. | Ethernet Modbus Gateway, EMB-02 | Network Gateway: The EtherModbus gateway allows serial Modbus RTUs to communicate and interoperate with Modbus/TCP based controllers. The Modbus standard protocol is an asynchronous protocol designed to connect directly to computer asynchronous ports. Modbus has been extended to operate over Ethernet using the IP protocol suite. The EMB-02 gateway converts between the Modbus TCP/IP protocol and Modbus ASCII/RTU protocols transparently. The EMB-02 enables one or more MODBUS controllers to communicate with Modbus ASCII/RTU based serial RTUs. It will not allow Modbus/TCP RTUs to operate with a serial MODBUS controller. |
Data Track Process Instruments | Tracker 300 Series | Controller: The Tracker 300 series is a DIN Rail-mounted, multifunctional PID Controller, signal conditioner, and trip amplifier with RS485 MODBUS RTU communications. |
Data-Linc Group | NET620 Serial to Ethernet Bridge | Network Gateway: NET620 allows the integration of serial connected devices into Ethernet networks without a complicated network interface. No special PLC or PC configuration needed to integrate DF1 or ModBus RTU devices into EtherNet/IP or ModBus TCP networks. |
Datalogic S.p.A. | Omni-Directional Laser Bar-code Scanner, DX8200A | Misc. Hardware: Omni-directional laser bar code scanner, purposely designed to satisfy the needs of sorting applications for the Transportation & Logistics market |
DataNAB, LLC | MBUS_IO3 | I/O Module: Using the Modbus registers, the MBUS_IO3 module can be configured as a Generic Modbus I/O board with built-in and/or external temperature sensors, a 0-10V temperature transducer, a Tstat controller for Fan Coils, Heat Pumps, Radiant heat, VAV control, etc. |
DataNAB, LLC | DataNab AiO8 | I/O Module: Modbus 8 Channel Analog Input/Output Module |
DATAQ Instruments, Inc. | DI-900MB Modules | I/O Module: Din rail mountable analog and discrete I/O modules that support the Modbus-RTU protocol for distributed I/O applications. |
Datataker Pty Ltd | DT80/81 | SCADA Hardware: Data logger and flexible data acquisition and data logging system |
Define Instruments | Zen RTU Remote Terminal Unit, ZEN-RTU | Remote Terminal Unit: Get 16 signals into your PLC or SCADA system! If you need to collate multiple signal input types and route them to your PLC or SCADA system, choose the Zen RTU. This flexible and powerful monitoring and control station has four digital inputs and an RS485 Modbus/RTU port. Additionally, it has an Ethernet port that can be selected as Modbus TCP, or EtherNet/IP (ODVA CONFORMANT) for connection to Logix Controllers, FactoryTalk View etc. The Zen RTU is available with 16 Isolated Universal Inputs and accepts Current, Voltage, RTD, TC, Frequency, Counter and more. An RTD-only, Non-isolated version can also be selected as a cost-effective option for multi-channel temperature applications where isolation is not required. |
Define Instruments | RIO-MOD-RTU Remote Terminal Unit with Relay I/O | Remote Terminal Unit: The RIO-MOD-RTU is a 24VDC powered Modbus Slave device which can be used as a Remote Terminal Unit (RTU) for any Modbus system. It is ideal for direct connection to Modbus Master PLCs or SCADA systems. The unit uses RS485 as the physical connection and is easily set up through DIP switches. It has addressing for up to 32 devices to co-exist on the bus, and is capable of providing 16 isolated relay outputs and 16 digital inputs. 32 indicator LEDs are conveniently placed on the unit, ideal for commissioning and fault finding. Find out more or buy online at defineinstruments.com |
Define Instruments | Zen Datalogger 16 Channel Control & Monitoring Station, ZEN-LOG | Remote Terminal Unit: Get your data acquisition (DAQ) requirements fulfilled with the Zen Datalogger. This flexible 16-channel control and monitoring station logs data onto a 1GB Micro SD card, so you can physically take your data with you or route it to other hardware. The 16 isolated universal input channels accept TC, RTD, mA, mV, V, Frequency and Counter inputs, enabling you to reduce the number of separate instruments you need for your application, keeping things simple for maintenance and troubleshooting. Modbus RTU and Modbus TCP are provided for simple integration with SCADAs and PLCs. Learn more about this Data Logging Control and Monitoring Station. |
Delphin Technology AG | TopMessage | Monitoring Hardware: TopMessage devices are designed for acquisition of measurement and process data, as a data logger for universal measurement values, remote monitoring of decentralized plant and machinery, test bench automation, vibration monitoring of shafts and bearings and factory data acquisition. |
Delta Computer Systems, Inc. | RMC70 Series One- and Two-Axis Motion Controllers | Controller: One- and Two-Axis Motion Controllers |
Detcon Inc. | Model X40 Series control system | Controller: The X40 Series controllers provide an extensive list of Input and Output capabilities that allow for use in almost any control system integration design. Standard outputs include Common Alarm Relays and Modbus Interface. Optional Outputs include 4-20 mA, Webserver Interface, and an Alarm Voting Module. The RS-232 port is standard and is used for uploading configuration data or downloading Data Logging results. |
Detcon Inc. | Model Series 700 Gas Detection Sensors | Sensor: Industrial gas detection sensors |
Detcon Inc. | DM-100 Low-power Gas Detection Sensors | Sensor: Low power devices designed to detect and continuously monitor a wide range of toxic gases. |
Deutschmann Automation GmbH & Co. KG | LOCON 200-MB | Controller: Cam control with integrated ModbusRTU interface |
Dewar Electronics Pty. Ltd. | HC 6000 Series Multi-Function Meter Family | Monitoring Hardware: HC 6000 is a compact, electronically advanced and programmable multi-display metering device (MDMD). It is an ideal for the demand of future electrical metering industry. |
DGH Corporation | D5000M Four Analog Input Modules | SCADA Hardware: Low-cost data acquisition modules that provide direct connection to four analog signals of the same type and range to any host with an RS-232 or RS-485 port. The modules provide direct connection to a wide variety of sensors and perform all signal conditioning, scaling, linearization and conversion to engineering units. The data values are transmitted to a host computer via RS-232 or RS-485 using either the DGH ASCII protocol or Modbus RTU binary protocol. The protocol is user-selectable. |
DGH Corporation | D1000M single-channel data acquisition modules | SCADA Hardware: The D1000M series modules convert an analog input signal to engineering units and transmit in ASCII format to any host with standard RS-485 or RS-232 ports. They use the Modbus RTU protocol for communication. |
DGH Corporation | DIN-100 Series | I/O Module: The DIN-100 Series Sensor to computer modules are a family of data acquisition modules that convert analog input signals to digital data and transmit via RS-485 to a controller which may be a computer or other processor-based equipment. The modules can measure temperature, pressure, voltage, current, digital input or digital output signals. The modules provide direct connection to a wide variety of sensors and perform all signal conditioning, scaling, linearization and conversion to either linearized ASCII data values or Modbus RTU data values. |
Digi International | Digi-IA Product Family | Network Gateway: The Digi-IA family of products supplies Ethernet to Serial communications supporting Modbus/TCP <> Modbus/RTU (or ASCII) bridging. The same firmware also supports most other protocols in raw tunneling or as a remote comm port from Windows or Unix computers. |
Digi International | XCELL - Remote Access Server XC 35 | Misc. Hardware: The RAS server XC35 allows to a client to connect via a modem to any Ethernet network and to program PLCs, access to WEB servers...without any particular software on the client or any particular configuration in the PLCs. |
Divelbiss Corporation | Universal Control Panel | HMI Hardware: Universal Control Panel, Backlit LCD Display, 4 Digital Inputs, 4 Digital Outputs, VDC, Modbus Slave |
Divelbiss Corporation | Boss 32 Controller, BOSS32B-x-x-x | Controller: The Boss 32 is a fully integrated, 32-bit operator interface and multifunctional microcomputer. Powerful and versatile, the Boss 32 provides control of multiple control functions such as temperature, pressure, speed, position, counting, communications and monitoring. |
Divelbiss Corporation | Universal Machine Controller, UMCB-xxx | Controller: The Universal Machine Controller (UMC) is a fully integrated, 32-bit microcomputer. Powerful and versatile, the UMC provides power over multiple control functions such as temperature, pressure, speed, position, counting, communications and monitoring. |
Divelbiss Corporation | PLC on a Chip, PLCHIP-M2-2562x | Controller: Designed to provide embedded intelligence in OEM products, PLC on a Chip? is a cost-effective programmable logic controller packaged in a single integrated circuit. All I/O and integrated functions are pre-assigned for use within the Divelbiss EZ Ladder? PC based, industrial ladder diagram software. The full featured PLC on a Chip controller and EZ Ladder combination provides for solutions that are both versatile and easy to implement. |
Divelbiss Corporation | PLC on a Chip Control System (PCS), PCS-xxx | Controller: Designed for speed, the PCS series of programmable logic controllers replaces the High Density Bear Bones product while adding expanded features and versatility. These features include analog I/O capabiliy, expanded communication ability via a CAN network with J1939 support, Sychronous Serial Interface (SSI), truly high-speed counting, and broad frequency range Pulse Width Modulation (PWM) outputs. Based on PLC on a Chip? technology, the controller is easy to apply and program using the EZ Ladder PC based software. |
Divelbiss Corporation | Enhanced Baby Bear Controller, ICM-EBB-700 | Controller: The Enhanced Baby Bear series of programmable logic controllers offers dimensions and mounting identical to the original Baby Bear product while adding expanded features and versatility. Based on PLC on a Chip? technology, the controller is easy to apply and program using the EZ Ladder PC based software. The base control board offers 5 inputs and 5 outputs with maximum expansion capability to 120 in and 120 out using standard expander modules. |
Dr SCADA Automation | Intelligate Remote Terminal Unit | Remote Terminal Unit: The Intelligate RTU is ideal for network management systems that require remote alarm monitoring, alarm mediation, or conversion; it supports multiple protocols such as DATAP DCP1 Protocol, DATAP DCP2 Protocol, Westronic WESDAC, standards such as Modbus, Modbus TCP/IP, Modbus UDP/IP, Telnet, TBOS and SNMP. The Intelligate RTU was designed with flexibility and future features in mind, yet is backward compatible with many of the features found in the older RTUs. Intelligate bridges the gap between the older fixed-form RTUs and the ever-changing industry demands of today?s Ethernet-based Telecom markets. |
DRI-STEEM Corporation | Vapor Logic4 Controller | Controller: Vapor-logic comprehensive control for DRI-STEEM GTS humidifiers. Vapor-logic4 offers the same functionality as Vapor-logic3 controllers, plus several new features: Web interface; Modbus, BACnet, and LonTalk to allow interoperability with multiple building automation systems (BAS); Up-time optimizer |
DURAG, Inc. | DL-X 200 Compact Flame Monitor | Sensor: The D-LX 200 is a compact flame monitor for monitoring flames for continuous operation, for example in large power stations, district heating plants, chemical process incineration plants, thermal exhaust gas incineration plants, sulphur recovery units, refineries, rotary kilns/cement plants. |
DynaGen Technologies | GSC400Plus Genset Controller | Controller: The GSC400 is designed to provide complete control, protection, AC metering, and engine instrumentation for both standard and electronic engines and gensets. The module is configured using both the front panel buttons or our PC configurator software. The GSC400 provides direct mounting compatibility with other DynaGen controllers such as the GSC300 to allow for a full range of options to fit the application. A Modbus/RTU Port is provided for connection to remote annunciators, SCADA systems, as well as options for remote monitoring over Internet and cellular. |
Dynasonics | TFX Ultra Ultrasonic Flow/Energy Meters | Sensor: TFX Ultra ultrasonic flow and energy meters clamp onto the outside of pipes and do not contact the internal liquid. Advantages include: low-cost installation, no pressure head loss, no moving parts to maintain or replace, no fluid compatibility issue, and a large, bi-directional measuring range that ensures reliable readings even at very low and high flow rates. |
E + E Elektronik GmbH | Humidity/Temperature Transmitter EE071 | Sensor: The EE071 is optimized for flexible use in bus applications. The standard Modbus RTU protocol is implemented on the RS485 interface. The Modbus Transmitter EE071 is energy efficient and ideal for use in battery-powered devices. |
E Instruments International LLC | CP 300 Pressure Transmitter | Sensor: The CP300 is a highly sensitive and accurate instrument. In addition to pressure measurements, it also has air velocity and air flow functions. |
Eaton Corporation | C440 Electronic Overload Relay | Monitoring Hardware: The C440 Electronic Overload Relay delivers enhanced motor protection based on the ability to directly monitor motor current in each phase. Thermal modeling is performed electronically with precision solid-state components. The electronics identify excessive current or phase loss and react to the condition with greater speed, reliability and repeatability than a traditional electromechanical device. |
Eaton Corporation | Modbus PONI | Network Gateway: The Modbus Product Operated Network Interface (MPONI) card enables Modbus communication capability to various Eaton products. |
Echelon GmbH | i.LON 100 Internet Server | Network Gateway: The i.LON 100 e3 Internet Server connects Modbus, M-Bus, LONWORKS, and legacy devices to the Internet and supports data points exchange between the devices. |
Echelon GmbH | i.LON SmartServer 2.0 | Network Gateway: Smart energy manager that helps a business achieve its operating and energy-efficiency goals. Designed to connect to IP-based applications such as enterprise energy management solutions, demand response programs, streetlight management systems, and high-value remote asset management programs, the server can link thousands of electronic devices to control centers. |
Eldridge Engineering Inc | Modbus-OPC | Software - OPC: Modbus, Modbus/TCP, and Modbus Plus OPC Server supports the Modbus RTU and ASCII protocols via RS-232 serial, Modbus/TCP via Ethernet TCP/IP, and Modbus Plus via latest MBX drivers. This server services data to all OPC clients on local and remote systems. |
ELECTRO Industries / Gaugetech | HMI EXT | HMI Hardware: HMI EXT is a fully functional SCADA HMI package allowing you to obtain a complete graphical view of your electrical distribution system. |
ELECTRO Industries / Gaugetech | Shark100 Power and Energy Meter/Transducer | Monitoring Hardware: Multifunction Electrical Measurement with RS485, Modbus & DNP 3.0 Protocols |
ELETTRONICA SANTERNO S.p.A. | SINUS PENTA | AC/DC Drive Control: Automation applications incorporated in the inverters of the SINUS PENTA series allow simple and inexpensive management of servodiameters, drawing machines, multipump systems, electrical axis motor systems and multipositioners. |
Embedded Technologies s.r.o. | Poseidon Family, 600252 | Monitoring Hardware: Poseidon 3266 is a SNMP- and web-enabled environmental monitoring device (temperature, humidity, dry contacts). |
Emerson Process Management | Zirconium Fork Density Meter, 7826/7828 Series | Sensor: Micro Motion Zirconium fork density and concentration meters are designed to monitor inorganic chemicals such as hydrochloric, nitric and sulphuric acid. |
Endian | 4i Edge 200, EFW4iE200 | Misc. Hardware: The 4i Edge 200 for branch offices/controlled temperature environments is designed to protect and provide secure remote access to all your SCADA equipment. With an all-in-one suite of features that includes firewall, routing, VPN and a deep-packet Intrusion Prevention System (IPS), it is a comprehensive industrial Ethernet connectivity solution. Additionally, Endian's intuitive web interface makes it easy to deploy and manage. |
Endian | 4i Edge 300, EFW4iE300 | Misc. Hardware: The 4i Edge 300 with DIN Rail is designed to protect and provide secure remote access to all your SCADA equipment for controlled temperature environments. With an all-in-one suite of features that includes firewall, routing, VPN and a deep-packet Intrusion Prevention System (IPS), it is a comprehensive industrial Ethernet connectivity solution. Endian's intuitive web interface makes it easy to deploy and manage. |
Endian | 4i Edge 500, EFW4iE500 | Misc. Hardware: The 4i Edge 500 designed to protect and provide secure remote access to SCADA equipment for extreme temperature environments. With an all-in-one suite of features that includes firewall, routing, VPN and a deep-packet Intrusion Prevention System (IPS), it is a comprehensive industrial Ethernet connectivity solution. Endian's intuitive web interface makes it easy to deploy and manage. |
Endress+Hauser Process Solutions | RMM621 Application Manager | Controller: The RMM621 is a single device signal analysis solution for use in process instrumentation. The device performs a variety of tasks including data recording, calculation and control. |
Endress+Hauser Process Solutions | Cubemass DCI 8CN | Monitoring Hardware: Coriolis mass flow measuring system |
Endress+Hauser Process Solutions | CNGmass DCI 8DF | Monitoring Hardware: Coriolis mass flow measuring system for fueling with compressed natural gas (CNG) |
EnFlex Corp. | EnFlex Modbus Driver | Software - Device Driver: An EnFlex native device that runs on an EnFlex Control Server to provide a generic interface between any Modbus RTU device and the EnFlex Application Software. |
ENGIBY srl | Modbus Driver for SAIA-PCD | Software - Device Driver: The Modbus driver supports the Modbus/TCP protocol over the IP-Module PCD7.F650 as well as the ASCII and RTU protocols over serial lines RS 232, 422 and 485. Both, Master and Slave functions are supported by the driver. |
eProduction Solutions, Inc. | Axess 2.4 GHz Gateway Sensor Receiver | Misc. Hardware: The Axess Gateway, a low-power, high-performance industrial receiver can receive remote sensor data messages from up to 512 Axess Transmitters enabling the rapid development of a network of sensors and detectors. Axess Gateway receivers report sensor data to control systems as serial data messages. |
Equustek Solutions Inc. | DL2000-CMX | Network Gateway: The DL2000-CMX provides an AC powered, freestanding Modbus serial interface for computers, MMIs, and OEM based applications that require access to a node on AB's DH+ network. The CMX can be set to be either a Master or a Slave on the Modbus serial link, as well as communicate using either RTU or ASCII protocols. The CMX in Master Mode can read from and write to registers and coils in any Modbus Slave device connected. Slave Mode allows a Modbus Master device to read from or write to files in a A-B PLC5 or SLC 5/04 connected to the DH+ network. |
Equustek Solutions Inc. | DL4000-DMX DF1 | Network Gateway: The DL4000-DMX has two configuration modes that allow Modbus devices to communicate with A-B's DF1 protocol (CH0s of PLCs, SLCs, Micrologixs, etc.) Modbus Master Mode configures the DL4000-DMX to act as a Master on the Modbus Network. Commands can be generated inside the PLC (DF1 Device) to access/change data inside Modbus Slave devices using either Modbus ASCII or RTU protocol. Modbus Slave Mode configures the DL4000-DMX to act as a Slave on the Modbus Network. Commands can be generated inside a Modbus Master Device to access/change data inside the SLC (DF1 device). |
Equustek Solutions Inc. | DL4000-MMX | Network Gateway: The DL4000-MMX allows Modbus Master RTU devices to communicate to multiple Modbus Slave ASCII Devices. |
Equustek Solutions Inc. | DL4500-MEDH+ | Network Gateway: Equustek's gateway interfaces your Modbus TCP/IP Network to A-B's Data Highway Plus DH+, extending the life of Allen-Bradley PLCs without Ethernet Interfaces. The DataLink solution allows applications such as RSLogix, RSLinx, and RSView to access devices on a DH+ network from an Ethernet/IP LAN, enabling users to run MMI applications or program and monitor PLCs on a DH+ network from an Ethernet LAN station. Other MMIs tested include Wonderware, Kepware, and Intellution. The DL4500-MEDH+ combines the Lantronix Ethernet Microprocessor with Equustek's DH+ token-ring technology. |
Equustek Solutions Inc. | DL4500-MEDH-485 | Network Gateway: Equustek's gateway interfaces your Modbus TCP/IP Network to A-B's Data Highway Plus DH+, extending the life of Allen-Bradley PLCs without Ethernet Interfaces. The DataLink solution allows applications such as RSLogix, RSLinx, and RSView to access devices on a DH+ network from an Ethernet/IP LAN, enabling users to run MMI applications or program and monitor PLCs on a DH+ network from an Ethernet LAN station. Other MMIs tested include Wonderware, Kepware, and Intellution. The DL4500-MEDH+ combines the Lantronix Ethernet Microprocessor with Equustek's DH+ token-ring technology. |
Equustek Solutions Inc. | DL3500 | Network Gateway: Equustek's DL3500 comes in 4 models. The DL3500-Modbus/DH+ and DH-485 become Modbus Masters for devices on A-B's DH+ or DH-485 networks. The DL3500-Modbus/DH+ and DH-485 become Modbus Slave devices for access to PLCs on A-B's DH+ or DH-485 networks. Master mode is used when a device on the DH+ network is going to initiate all communications with one or many Modbus slave devices. Slave mode is used when a device on the Modbus network is going to initiate all communications with one or many SLCs, PLCs or other DH+ devices. The DL3500-Modbus/DH+ or DH-485 is a two port device that bridges your Modicon Modbus devices to A-B DH+ network. The Modbus model can either be used as Modbus Master or Slave as well as having both Modbus ASCII and RTU protocols. |
Ethernet Direct Corporation | RMW-824 | I/O Module: Industrial 8-channel digital output and 8-channel digital input Ethernet module with 32-bit counters |
Eurotherm | 2500 Intelligent Data Acqusition and Precision Multi-Loop PID Control | Controller: multi-loop controller and data acquisition system |
Everest Software LLC | Peak HMI | Software - HMI: PeakHMI is a software HMI product with unlimited tag count, unlimited external connections and both Modbus serial and Modbus TCP support. |
Festo AG & Co. KG | CoDeSys Embedded Controller CPX-CEC | Controller: Embedded controller ideally adapted for pneumatics and motion applications with up to 31 electric drives. |
FilterSense | Particulate Monitor, Model PM 100 | Sensor: PM 100 offers particulate monitoring performance based on charge induction and protected-probe technologies invented by FilterSense. As particles flow near and around the probe, a minute current is induced. A DSP processes the signal into an absolute output relative to particulate flow. A protective layer over the probe works in combination with induction-sensing to ensure reliable operation with conductive particulate, moist powders, corrosive gases and particulate buildup. |
Flow Line Options Corp. | Consolidator 4 | Controller: ConsoliDator is a multiple-channel controller. It accepts 4-20 mA inputs, flow meter pulse inputs, and digital inputs. It is equipped with multiple relays, which all have user-definable actions, 4-20 mA outputs, and Modbus protocol communication capabilities. |
Flow Line Options Corp. | HydroFlo 3000 | Sensor: HydroFlo is a flow sensor with a fully integrated data logger, solar regulator, and battery housed in one rugged weatherproof enclosure |
FOCUS Software Engineering Pty Ltd | FieldTalk Modbus | Software - Other: Modbus protocol stack offering a variety of platforms, physical layers, protocol variants, programming languages, and functionality. Available for Modbus RTU, Modbus ASCII and Modbus TCP/IP. |
FTI Flow Technology Inc. | Electromagnetic Flowmeter MC 608 A/B | Monitoring Hardware: The MC 608 A/B Transmitter is a versatile mag meter transmitter, which offers automatic and continuous meter zeroing under flowing conditions. |
Galil Motion Control, Inc. | IOC-7007 I/O Controller | I/O Interface: The IOC-7007 I/O controller provides an intelligent solution for handling inputs and outputs. The IOC-7007 controller base accepts up to seven Galil I/O IOM modules. IOM modules are available with TTL inputs, optoisolated inputs, optoisolated outputs, high power outputs, dry contact relays, analog inputs and analog outputs. |
GE Consumer & Industrial | A-Series Lighting Control Panels | Controller: A-Series Lighting Control Panels provide programmable control of the breaker. The integration of the controller provides space savings over traditional external relay panels. The A-Series Lighting Control Panel can be stand-alone or networked into a building automation system. |
GE Consumer & Industrial | Durus Controllers | Controller: Durus Controllers are designed for simple control applications such as light control, gate control, HVAC, pump control and more. |
GE Consumer & Industrial | Multilin EPM 6010 | Monitoring Hardware: The Multilin EPM 6010 is a revenue-grade power meter with native BACnet/IP communications and standard Modbus TCP communications. This meter is designed to integrate into existing and new building management systems and allows users to gather data on voltage, current, power and energy usage throughout a facility. |
GE Fanuc Automation | VersaMax® Micro Plus | Controller: VersaMax Micro Plus controller, enhanced to support Modbus TCP Client and Server |
GEFRAN Inc. | GF_VEDO 35CT | Controller: All-in-One HMI, SoftPLC and remote I/O integrated in a single product. |
GEFRAN Inc. | GF_PROMER | Controller: GF_PROMER is a time-variable setpoint programmer, 4-loop controller, graphic trend and bargraph display, all in a single device |
General Monitors Inc | TS4000H Sensor for Toxic Gas Detection | Sensor: 24 VDC-powered toxic gas detector comprised of a base unit, interface module, and electrochemical cell (sensor) to monitor a variety of toxic gases in the parts per million (ppm) range, including: ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen chloride, hydrogen sulfide, nitric oxide, nitrogen dioxide, oxygen deficiency, ozone, and sulfur dioxide. |
General Monitors Inc | Gassonic Observer-H | Sensor: The Gassonic Observer-H detects gas leaks by sensing the airborne ultrasound emitted from leaking gas at high pressure. Ultrasonic gas detection is based on proven microphone technology and designed for operation in extreme environmental conditions. Because the Gassonic Observer-H responds to the source of a gas release rather than the dispersed gas, it is unaffected by changing wind directions, gas dilution, and the direction of the gas leak. |
Grid Connect Inc. (formerly Synergetic/Lantronix) | Industrial Modbus TCP Ethernet to Modbus RTU/ASCII Serial Controller | Controller: The DR2-MB is a Modbus industrial device server packaged in a din-rail mountable plastic housing that uses screw terminals and RJ45 to connect the 24VDC power and your serial ports. |
Grid Connect Inc. (formerly Synergetic/Lantronix) | Modbus TCP to DH-485 Gateway, PKV6000 | Network Gateway: This network interface bridge interfaces a Modbus TCP (Ethernet) Network to AB's DH485, extending the life of Allen-Bradley PLCs that do not have Ethernet Interfaces. The PKV6000 solution allows an Allen-Bradley PLC or SLC to access Modbus TCP server devices. |
GSE Scale Systems | Indicator 460 Series | HMI Hardware: Fully programmable indicators which adapt to most applications. Factory programmed applications such as truck in/out, batching, checkweighing, average pieceweight recall, remote display make setup quick and easy. Both indicators use a VFD display. The Model 460 has a 5-key elastomeric keypad, The Model 465 has a 22-key (full numeric) elastomeric keypad. Modbus protocol is standard. |
GSE Scale Systems | Indicator 560 Series | HMI Hardware: Fully programmable indicators with on board database memory. The Model 560 is equipped with a VFD display, the 562 has a 8 line x 40 character backlit LCD display. Design custom ticket print outs specific to your application. Factory programmed applications such as truck in/out, batching, checkweighing, average pieceweight recall, remote display make setup quick and easy. Modbus protocol is standard. |
GSE Scale Systems | Indicator 660 Series | HMI Hardware: Top of the line Process Control. Automate any process with the power of the 660 Series. Used in applications such as ingredient batching, in motion checkweighing, packing systems. Modbus Protocol is standard. |
Guangzhou ZHIYUAN Electronics Co., Ltd. | Modbus Communication Gateway, MPort-100IE | Network Gateway: MPort-100IE is a 3-in-1 Modbus Gateway. It integrates Modbus TCP, Modbus RTU and Modbus ASCII, and its serial interface can be flexibly configured for RS-232, RS-422 or RS-485 communication via the toggle switch so that users can establish a seamless Ethernet connection for Modbus serial devices easily. |
Guangzhou ZHIYUAN Electronics Co., Ltd. | NDAM Serial I/O Module | I/O Module: NDAM Distributed Data Collection Control System is a data collection system based on the new generation of brick structured network device system. It adopts the modularized structure, so that users can flexibly combine data collection modules to satisfy different functional requirements for different applications. The NDAM system can achieve a remote data collection via sensors or perform remote control of devices in the field. The NDAM system adopts the standard Modbus protocol and is compatible to most PAC and systems. |
Hamilton Company | Easyferm Plus ORP Arc | Sensor: The EASYFERM PLUS ORP Arc is an electrochemical ORP (Oxidation Reduction Potential) sensor with integrated electronics, having the full Arc functionality (of a measuring device with self-diagnostics). |
Hardy Instruments, Inc. | HI 4050 Weight Controller | Controller: This weight controller/weight indicator acts as a front end to a PLC, PC or DCS system for most weighing applications, or as a stand-alone for simple control or weight monitoring. |
HARTING Inc. of North America | Fast Ethernet Switch, Ha-VIS FTS 3100s-A | Misc. Hardware: Harting's Fast Track Switching system uses standard Ethernet, but can identify automation profiles such as Profinet, Ethernet/IP and Modbus TCP, accelerate their transmission speeds and prioritise them. |
HIMA Paul Hildebrandt GmbH + Co KG | HIMax Safety System | Monitoring Hardware: HIMax is an intuitive, intelligent safety platform. It offers tools and features that make it simple to use. It helps to eliminate possibilities for human error and saves time in the engineering and start-up phase. |
Honeywell International Inc. | Herculine Smart Actuators | Misc. Hardware: HercuLine Electric Actuators are engineered for reliability, accurate positioning, and low maintenance. Designed for very precise positioning of dampers and quarter-turn valves. With non-contact sensing, the maintenance problems and unexpected shutdowns associated with slidewires and potentiometer wear are eliminated. |
ICP DAS USA, Inc. | M-7000 Series Controllers | Controller: The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU and DCON protocols. With the Modbus RTU protocol, it easily communicate with most popular SCADA/ HMI software and PLC. It has the same form factor as the I-7000 series. |
ICP DAS USA, Inc. | uPAC-7186EG/D | Controller: uPAC-7186EG/D is an Advanced Ethernet ISaGRAF uPAC. It can send emails with an attachment to up to 10 recipients at a time. It has a data acquisition auto reporting system. ISaGRAF PACs can use UDP IP Client to auto-report acquisition data & control data to local or remote internet PC/Server. uPAC-7186 controllers have RS-485, RS-232, Ethernet, and Modbus RTU/TCP communication ports. |
ICP DAS USA, Inc. | TPD-280 Touchscreen Controller | Controller: TouchPAD is a tiny touch screen controller HMI which is designed for building and home automation. TPD-280 is equipped with a high resolution TFT color touch screen and fits in regular electrical wall-mount outlets. TPD-280U features a real time clock and a USB port for convenient interfacing with a PC. |
ICP DAS USA, Inc. | tGW-700 | Network Gateway: The tGW-700 is a Modbus TCP to RTU/ASCII gateway that enables a Modbus/TCP host to communicate with serial Modbus RTU/ASCII devices through an Ethernet network, and eliminates the cable length limitation of legacy serial communication devices. |
ICS Electronics | GPIB-to-Modbus Interface, Model 4899 | I/O Interface: The GPIB-to-MODBUS Interface converts simple ASCII commands into Modbus RTU messages. It provides both single ended RS-232 and balanced RS-422/RS-485 serial signals, and connects to single and multiple Modbus devices. The product is IEEE-488.2 compliant and meets latest GPIB Standards. |
ICS Electronics | GPIB-to-MODBUS Interface Board, Model 4809 | I/O Interface: The GPIB-to-MODBUS Interface Board converts simple commands into Modbus RTU messages; Provides both single ended RS-232 and balanced RS-422/RS-485 serial signals. It can control multiple Modbus devices. The GPIB Interface is IEEE-488.2 compliant and meets latest GPIB Standards. |
ICS Electronics | OEM GPIB-to-RS-232 MODBUS Interface, Model 4819 | I/O Interface: The Model 4819 uses simple GPIB commands to control RTU Modbus devices. It provides GPIB-to-RS-232 and RS-232-to-RS-232 data paths to Modbus device. User selects GPIB or RS-232 control of the Modbus device. The GPIB Interface is IEEE-488.2 compliant and meets latest GPIB Standards. Saves GPIB address, Serial settings and user's IDN message in Flash. Personalizes board as part your end product. |
IDEC Corporation | HG2G - 5.7' Touchscreen | HMI Hardware: 5.7', 12VDC Operator Interface |
ILS Technology LLC | deviceWISE Device Gateway | Network Gateway: The deviceWISE Device Gateway is an integration appliance that maps data between different devices seamlessly without requiring any configuration changes in either device. |
Imperious Technology Inc. | Smart Protocol Analyzer | Monitoring Hardware: Smart Protocol Analyzer test set translates protocols into plain English. It can decode industrial protocols such as Modbus RTU, Modbus ASCII, Modbus TCP/IP, Fisher ROC, DNP, DNP/TCP, Bristol Babcock BSAP, Teladine Binary, and any other SCADA industrial protocol which is transmitted over serial link (RS485, RS422, RS232), dial up modem, radio modem, TCP/IP, UDP/IP, PPP and CDPD. Smart Protocol Analyzer captures Ethernet traffic directly from the LAN as well as dial-up PPP connections and supports socket-based terminal server monitoring. The Analyzer's serial monitor captures serial port traffic transparently, non-intrusively, without requiring special setup. Serial monitoring can also be performed using special sniffer adapter/cables. Once the software is installed, you are ready to capture your serial or Ethernet data in real time. |
InduSoft | InduSoft Web Studio | Software - SCADA: InduSoft Web Studio is an integrated collection of automation tools that includes all the building blocks required to develop modern HMI and SCADA applications that run native on Windows 2000, XP, Vista, CE and CE .NET or in an Internet and Intranet environment. A simple drag-and-drop, point-and-click development environment lets you mimic the most complex behavior of your live processes. |
Industrial Control Communications, Inc. | MBP-100 Network Gateway | Network Gateway: The MBP-100 Network Gateway allows information to be transferred seamlessly among Modbus Plus, RS-485, RS-232, and Toshiba Adjustable Speed Drive (ASD) networks. |
Industrial Control Communications, Inc. | ETH-1000 Multiprotocol Gateway | Network Gateway: The ETH-1000 gateway allows information to be transferred seamlessly among various Ethernet and RS-485 networks. |
Industrial Scientific Corporation | 4800 Controller | Controller: The 4800 Controller is an 8-48 analog input controller, which can also monitor up to 72 digital ModBus RTU inputs. |
Ingeteam Technology S.A | INGESYS® Gateway | Network Gateway: The INGESYS® GATEWAY family of protocol converters provides standard-based, fieldproven utility communication solutions that match protocol communication integration and translation requirements for power generation, transmission and distribution, oil and gas and other remote monitoring fields of application. |
Innoventor, Inc. | Modbus Rapid Integration System | Software - Programming: The Modbus? ? Rapid Integration System was created for rapid development in an embedded environment. |
Instrumentation Northwest, Inc. | PT2X Submersible Pressure/Temperature Smart Sensor | Sensor: An integrated datalogger and pressure/temperature sensor, INW's AquiStar? PT2X is designed for monitoring groundwater, well, tan and tidal levels, as well as for pump testing and flow monitoring. |
IntegraXor | InteGraxor 2.5 | Software - SCADA: Windows-based system to develop projects and use a web browser to view and control SCADA applications from anywhere in the world |
International Battery, Inc. | IBexus Energy Storage System | Misc. Hardware: 24-Volt, 4.1 kWh Li-ion energy storage system well suited for storage of solar and other renewable energy sources |
Intesis Software SL | IntesisBox | Network Gateway: IntesisBox allows you to interconnect the internal system (building automation, industrial automation, BACnet, ModBus, Konnex...) to the external system (fire system, access control system, security system, HVAC, cold/warm generation, energy generation & measurement, lighting, hotel management, domotics...). |
IPACT, Inc. | OpenVMS Modbus/TCP Communication Library | Software - Device Driver: The IPACT Modbus/TCP Communication Library? provides an Application Programming Interface (API) for user written application processes on COMPAQ's OpenVMS systems. The IPACT Modbus/TCP Communication Library allows connectivity to the Modbus Devices capable of TCP/IP over Ethernet. The OpenVMS host is modeled as both a PLC and as a message-oriented device. |
Ipsil | IP8930 | Controller: The IP?8930 is a small (33.2mm x 34.5mm) TCP controller module to add intranet/Internet-based monitoring and control to an application. The IPu8930 can also be used as a serial-to-Ethernet bridge. Add an RJ-45 and a power source and you're ready to access up to eight different devices such as 4-20ma sensors or dry contact relays. A developer kit is also available. |
iRidium Ltd. | iRidium for Modbus | Software - Device Driver: iRidium controls Modbus as well as any other equipment (like Beckhoff or KNX), Media Servers with full 2-way communication. Your customer gets a complete solution to control all equipment, using only one app. Control Modbus and any other equipment from iPad, iPhone, Mac, Android or Windows panels. |
ISaGRAF | ISaGRAF | Software - Programming: Introduced in 1990, ISaGRAF was originally designed to bridge the gap between microcomputer systems and PLCs. It has grown to become a leading software technology for open automation, applicable to the traditional automation, embedded control and soft logic markets. |
ISEP (S) Pte Ltd | Protocol Converter, ES-RTU-01 | Network Gateway: An intelligent and cost-effective Protocol Converter. It enables different devices to communicate with each other using Modbus RTU or Modbus-TCP protocol. An extensive library of drivers is available to support interoperability between a variety of serial device especially in the fire and process control industries. |
ISEP (S) Pte Ltd | Modbus Alert Email | Remote Terminal Unit: The Modbus Alert Email (Email-Alert-03) sends alert messages to operators or technicians via e-mail. Immediately, this gateway can enhance a ModBus RTU device to include SMTP to send e-mail messages. The e-mail content and subject can be pre-configured. E-mail address is configurable for each Modbus register; maximum of up to 10 holding registers can be monitored. |
ISOIL INDUSTRIA SpA | ISOMAG - Electromagnetic flow meter converter | Monitoring Hardware: The ML210 converter is used in all those markets where high performances, communication buses, flexibility on the number of inputs/outputs, batch applications, data storing are required. |
Janitza electronics GmbH | UMG 103 | Monitoring Hardware: Universal measuring devices of the UMG 103 product family are mainly designed for use in low voltage distribution systems. The UMG 103 is a measuring instrument with an effective energy class of 0.5S. |
Jetter AG | Alphanumeric LCD display, BT10 and BT12 | HMI Hardware: Alphanumeric LCD display |
Jetter AG | Full graphics display, BT20 | HMI Hardware: Full graphics display, b/w, 240 x 128, up to 56 function keys |
Jetter AG | JetControl 647 PLC | Controller: PLC with Ethernet, Internet-Technologies and integrated motion control |
Jetter AG | JetMove 2xx Servo Controller/Amplifier | Controller: Servo Controller/Amplifier with Ethernet-Interface |
Jetter AG | JetControl 24x PLC | Controller: PLC with Ethernet, Internet-Technologies and integrated motion control |
JUMO GmbH & Co. KG | cTRON Compact controller | Controller: Freely configurable and universally applicable compact controllers in various DIN formats for controlling temperature, pressure and other process variables. |
JUMO GmbH & Co. KG | dTRANS Lf 01 Transmitter/Controller | Controller: This instrument measures and controls the conductivity of aqueous solutions. |
JUMO GmbH & Co. KG | JUMO LOGOSCREEN nt | HMI Hardware: Paperless recorder with TFT display, CompactFlash card and USB interfaces |
K-TEK Corporation | KVIEW100 Multi-Channel Controller | Controller: Multi-channel controller with Modbus RTU Communications |
KALKI Communication Technologies | Sub-Station Gateways, | Network Gateway: Kalki Sub-Station Gateway Lite family of protocol converters are solutions for sub-station and communication integration requirements for the Power Generation, Transmission & Distribution, Oil & Gas and Automation Industries. These devices support new and high speed standards like IEC 61850 and IEC 104 and integrate in a secure manner with local and national grids at the same time being able to talk within the sub-station on standards like IEC 103, DNP3, Modbus, SPA, Courier, DLMS/IEC 62056. |
KALKI Communication Technologies | SYNC 2000 | Network Gateway: SYNC 2000 is KEMA certified for 61850 Server and is IEC 61850-3 Compliant Mid-sized field device with up to 6 serial channels, 2 Ethernet channels, optional modem card and IO board for applications like substation protocol converters, data loggers, low end data concentration, multi-protocol mapping, industrial complex meter gateway, building automation with all major open standards as well as select proprietary protocols support. |
KALKI Communication Technologies | SYNC 3000 | Network Gateway: High end field device with up to 16 serial channels, 4 Ethernet channels (FO or Base-T) for large scale protocol conversion/concentration. Supports all features of SYNC2000 with additional processing power, RAM and storage capacities. |
Kayden Instruments | CLASSIC 800 Series Flow, Level, Interface & Temperature Switches | Sensor: Thermal dispersion technology creates a very accurate, economical and rugged device for sensing flow, (point) level & liquids interface. The sensors incorporate two platinum Resistance Temperature Detectors (RTDs), one RTD measures the actual process temperature while the other RTD is heated to create a temperature differential. |
Kele | VA301C Gas Detection Controller | Controller: The VA301C Gas Detection Controller provides continuous monitoring of up to 96 inputs/outputs, on three channels, at distances up to 2000 ft. Modbus communication channels are included, and a BACnet communication module is available. |
Kessler-Ellis Products | LEVELtrol II (LT2) | Controller: The LEVELtrol II (LT2) Flow Computer is a level indicator for use with a variety of level sensor types in liquid applications. The LT2 can be used for level monitoring, level control and level batching (batch by level). |
King Engineering Corporation | LP3™ Tank Level & Draft Indicating System | Monitoring Hardware: LP3 Marine System provides continuous measurement of level in service or ballast tanks. Calculating level on the basis of hydrostatic pressure created by liquid depth, the system measures total product mass for more precise material accounting. |
KK Systems Ltd | KD485 | Network Gateway: The KD485 is a multi-purpose isolated RS232/422/485/20mA interface converter with intelligent data processing options. Three standard product versions cover most industrial interface and protocol conversion applications. |
KLINKMANN Automation | Modbus Master/Slave Communication Server | Software - OPC: Microsoft Windows 32-bit application program that acts as a communication protocol Server and allows other Windows application programs access to data from Modbus network using the RS-232 serial and/or TCP/IP interface; for Microsoft Windows and InTouch Applications |
Klockner-Moeller | PS416 Controller | Controller: The PS416 is used for the control of complex processes, from measured value monitoring, to calculation of control algorithms, to the control of actuators. Its modular construction and large range of available cards enable solutions to be designed for every branch of industry. Distributed peripherals are easily connected via a number of different fieldbus systems. |
Kollmorgen Corporation | AKD Family of Servo Drives | AC/DC Drive Control: AKD is designed with the versatility, communications, and power to expand machine performance and increase integration speeds. Motor set-up is plug-and-play and multiple Ethernet connectivity options provide both open and closed protocols. Online troubleshooting and data verification enable faster programming. And a broad power range in a smaller, compact design allows use of these drives with a single interface. |
Korenix Technologies Co., Ltd. | JetI/O 6550 | I/O Module: JetI/O 6550 is a Block I/O module equipped with 14 channels Digital Input, 8 channels Digital Output connectors. JetI/O 6550 provides 16-bit resolution and high accuracy. It supports event counter for DI mode, pulse output for DO mode. The flexible Conditions&Go (IF-Then) rules help users define intelligent logic rules for remote I/O control. |
Korenix Technologies Co., Ltd. | JetNet 6059G / 6059G-w | Misc. Hardware: Industrial 9G Gigabit Managed Ethernet Switch |
KurySoft | Modbus Constructor v1.0 | Software - Testing and Simulation: Using ModbusConstructor one can create comprehensive descriptions of the Modbus data model implemented in a device. The model allows representation of all data elements independently from each other according to their meaning. Requests to the target device may be defined as automatic (polling) and/or as manual (user?s menu or dialog). The same project (model) is used for simulation purposes. MobdusConstructor comes with a special utility, ModbusReader, which operates using the model created with MobdusConstructor to interact with devices. ModbusReader is a freeware program. |
Lantronix Inc | IntelliBox-I/O 2100 | Monitoring Hardware: IntelliBox?-I/O 2100 programmable device server connects equipment to an IP network and monitors it to watch for events at specified intervals. When an event occurs, IntelliBox automatically sends pre-determined, user-defined command(s) to the equipment causing it to take appropriate and/or corrective actions, without any user intervention. IntelliBox can send email notification that the event was detected and handled accordingly. IntelliBox can act as a Modbus TCP slave, enabling Modbus TCP masters to monitor the status of digital inputs and set the digital outputs and relays. It can also be used as a ?Modbus bridge? (Modbus TCP to Modbus RTU/ASCII protocol converter) enabling users to connect RS232/RS485 Modbus RTU/ASCII devices to their Ethernet network to be controlled by Modbus TCP masters (PLCs, OPC Servers, SCADA Software, etc). |
Larsen & Toubro Limited | ER300P Energy Meter | Sensor: ER300P is an energy meter that measures active, reactive and apparent energies on 3 phase 4 wire systems in all four quadrants |
Laurel Electronics, Inc. | Laureate Modbus Serial Output DIN Rail Transmitter | Misc. Hardware: Serial output transmitter |
Leroy Automatique Industrielle | TES Remote I/O Logic and Analogue Terminal | I/O Interface: The TES is a remote I/O logic and analogue terminal for RS485 networks operating over a Modbus protocol. With a Modbus master running over RS485, data centralisation and regular transfers between it and the various slaves on your network are guaranteed for your controller or computer. |
Leroy-Somer | DIGISTART D2 | AC/DC Drive Control: Compact digital starter, with integrated motor protection |
Leroy-Somer | DIGISTART D3 | AC/DC Drive Control: High-performance, communicating electronic starter for induction motors up to 1600 kW |
Levelese, Inc. | Levelese Level Sensor | Sensor: Continuous liquid level system designed to operate in stringent environments ranging from marine oil storage, acidic material transportation vessels to rivers and streams. Levelese is not affected by turbulence and the actual depth of the vessel or as in a deep well. |
Liebert Corp (division of Emerson) | Liebert SiteLink-E Communication Interface | I/O Interface: Liebert SiteLink-E is an Ethernet-ready device that supports all Emerson protocol interfaces as a BACnet router. It provides the communications link between an existing Building Management System and Liebert precision cooling and power and UPS systems. The unit can stand alone or act as a Modbus or BACnet slave through either an EIA-232 or EIA-485 (2-wire or 4-wire) configurable port. |
Lika Electronic | EM58 Absolute Rotary Encoders, Modbus RTU | Sensor: EM58 is an optical multiturn encoder series with a Modbus RTU over RS-485 protocol interface. EM58 features an overall 26-bit resolution (4096 cpr x 16384 rev.) and is designed in a complete selection of mechanical and electrical configurations. |
Lika Electronic | EM58 Absolute Rotary Encoders, Modbus TCP | Sensor: EM58 is a low cost magnetic multiturn encoder series with a Modbus TCP interface. EM58 features an overall 27-bit resolution (8192 cpr x 16384 rev.) and is designed in a complete selection of mechanical and electrical configurations. |
Lika Electronic | HS58/HM58 Absolute Rotary Encoders | Sensor: The HS58/HM58 series of high accuracy and high resolution optical encoder series, with Modbus TCP protocol interface, features a 18-bit single turn resolution (262144 cpr). HM58 has an overall 30-bit multiturn resolution (65536 cpr x 16384 rev.) The series is designed with a complete selection of mechanical and electrical configurations. |
Lika Electronic | RD1A/RD12A Series AC/DC Drive Controls | AC/DC Drive Control: RD1A/RD12A series rotary actuators integrate a BLDC motor, the real multiturn absolute encoder, the position controller and the Modbus interface in a single feature-rich unit. They are the complete and cost effective solution to drive positioning and auxiliary axes and cut set-up and change-over time. |
Lika Electronic | RD4 Series AC/DC Drive Controls | AC/DC Drive Control: RD4 series rotary actuators integrate a BLDC motor, the real multiturn absolute encoder, the position controller and the Modbus interface in a single rugged unit for use in harsh industrial environments. They provide high torque to drive positioning and auxiliary axes and cut set-up and change-over time. Designed also for continuous duty. |
Lika Electronic | RD5/RD53 Series AC/DC Drive Controls | AC/DC Drive Control: RD5/RD53 series rotary actuators integrate a BLDC motor, the real multiturn absolute encoder, the position controller and the Modbus interface in a single unit. They are the space-saving and low cost solution to drive positioning and auxiliary axes and cut set-up and change-over time. |
LiveData Inc. | LiveData RTI Release 5.0 | Software - SCADA: Real-time monitoring, executive dashboard, and data historian solution |
Logic Beach Inc. | IntelliLogger IL-Mini | Monitoring Hardware: Stand-alone data logging and alarming instrument |
LOYTEC electronics GmbH | L-INX Automation Server (LINX-x0x) | Network Gateway: The L-INX Automation Server (LINX-x0x) is used to interconnect and manage distributed real estate or buildings of any size. It operates as a gateway for a variety of device types, including Modbus, M-Bus (EN 13757), LonMark, BACnet, and OPC XML-DA for SCADA systems. L-INX Automation Servers can store and manage user-defined dynamic graphic pages to be displayed on the LWEB-800 user interface. LWEB-800 is a .NET application and runs on any PC, Notebook, or Smart Phone with MS Windows OS. |
LOYTEC electronics GmbH | L-INX Controller (LINX-x1x) | Controller: L-INX Automation Server (LINX-x1x) is a programmable device (IEC 61131-3 standard) that can be used in any instrumentation or control application. It is also used as a gateway for device types, including Modbus, M-Bus (EN 13757), LonMark, and BACnet. L-INX Automation Servers provide an interface between network technologies and IEC 61131-3 variables. |
Lufft USA | Ultrasonic Anemometer | Sensor: VENTUS belongs to Lufft's WS family of professional intelligent sensors with digital and analog interfaces. The ultrasonic wind sensor is designed without mechanical parts as they have been used with traditional 'cups and vanes'. |
M-System Co., Ltd. | Model 53U Multi Power Monitor | Monitoring Hardware: The Model 53U is a 96-mm-square Multi Power Monitor mounted on a panel surface. One model can be used for single-phase/2-wire and 3-wire, three-phase/3-wire and 4-wire systems |
Maple Systems Inc | Silver Series Touchscreen Operator Interfaces | HMI Hardware: Offering a range of options from 5.7-inch, 4-color to 10.4-inch, 256 color TFT touchscreens, the Silver Series Operator Interfaces upport over 85 controllers from over 35 manufacturers |
Masibus Automation And Instrumentation Pvt. Ltd. | 8-Channel Modbus I/O Module - MAS-AI-U-8-M | I/O Module: Masibus is a low-cost 8-Channel Modbus based remote IO unit in DIN rail mounting, which provides an easy way for integrating analog signals to supervisory SCADA/PLC/DAS systems. There are several inputs which this model accepts as an input like mA, V, RTD, Thermocouple, etc. Modbus IO module measures all field signals with accuracy of 0.1% of FS |
measX GmbH & Co.KG | DASYLab | Software - SCADA: The DASYLab data acquisition software comes in four versions. DASYLab lite offers the most basic modules and up to 32 AI channels. As with the other versions there are selectable drivers. The number of data lines is limited to 64 and only 1 layout is available. The add-on modules are not available . The version can be upgraded to Basic, Full, or Pro. |
Merz s.r.o. | OPC Server for Modbus Slave RTU | Software - OPC: OPC Server for communication with devices using the Modbus protocol. |
Merz s.r.o. | OPC Server for Modbus Master RTU | Software - OPC: OPC Server for Modicon PLC - Master and for Modbus compatible devices |
Messung | Nexgen 2000 PLC | Controller: Micro-Modular PLC |
Meters UK Ltd | Modbus Module - EF1 | Network Gateway: The EF1 converts any utility meter (Electricity, Gas, Heat, Oil, Steam, Water) into Modbus. (The utility meter must have a pulsed output.) |
Mettler-Toledo, Inc. | IND560/560x General Purpose Weighing Terminal | Monitoring Hardware: The IND560 weighing terminal is designed for both process control and manual weighing operations in both safe areas and Zone 2/22 and Divsion 2 hazardous areas. The flexibility of analog or digital high precision load cell inputs, direct PLC communication, digital I/O, advanced calibration techniques, Ethernet connectivity to a PC for configuration, all combined with the option of panel or desk/wall/column-mounting, make the IND560 the perfect match for weighing applications in many industries. IND560 supports EtherNet/IP, Analog Output, Allen-Bradley RIO, Modbus TCP, DeviceNet, and other fieldbus connections. |
Mettler-Toledo, Inc. | IND131/331 Process Weighing Terminal | Monitoring Hardware: This weighing terminal includes features and functionality never before offered in such a compact and versatile form factor. For OEMs and System Integrators building best-in-class weighing systems and for end users, the IND131/IND331 delivers improved diagnostics, improved reliability and more efficient use of space. Easy integration into process-based network architectures provides valuable plant-floor information to optimize production and help reduce down-time. IND131 and IND331 terminals can be equipped with a wide array of PLC options including: analog output, Allen-Bradley RIO, DeviceNet, Modbus TCP, Modbus RTU and EtherNet/IP. |
Mettler-Toledo, Inc. | IND780 Advanced Weighing Terminal | Monitoring Hardware: The IND780 advanced weighing terminal is the most powerful and flexible terminal in the METTLER TOLEDO product range. Capable of simultaneously weighing on four different scales the combination of a multiprocessor design, 366Hz A/D rate, and robust TraxDSP digital filtering technology provide extremely fast performance even in applications with heavy disturbances. |
Micon-Powell Process Systems inc | MICON U-200 | Controller: The U-200 combines RCM functionality and reliability with the latest in technological advances including Ethernet and Internet communications, OPC compatibility, and Microsoft ? CE technology. The controller is fully compatible with any DCS or plant control system with OPC and Modbus communications. |
Micronor Inc. | Fiber Optic Absolute Position Sensor, MR330 | Sensor: The MR330 series Fiber Optic Absolute Position Sensor System features an all-optical design that combines interference-free sensing, long distance transmission, absolute angular measurement from 0° to 360° with 13-bit resolution and 12-bit multiturn tracking. A complete measurement system consists of the MR332 Passive Sensor and MR330 Controller which are optically linked with standard Duplex LC multimode fiber connections. The MR332 passive sensor design is EMI immune, withstands lightning strikes and is ATEX approved for use in hazardous locations. Model MR330-1 SSI Controller operates from 24 VDC and features multiple built-in interfaces for maximum system compatibility. |
Microsant Technology Inc. | Visual Protocol Simulator | Software - Testing and Simulation: Visual Protocol Simulator software is a serial port analyzer that allows programmers to design and run protocol packets on the target system via RS232 serial port. VPS is a complete integrated development environment (IDE) for packet design, project management, packet simulation, analyzing, monitoring and data logging. VPS is simple and easy to use, no scripting is required. Users can design packets and run in minutes. |
Mil-Ram Technology, Inc. | TA-2008MB/2016MB Digital Control Systems | Monitoring Hardware: Digital Modbus control system with multi-drop, daisy chain network architecture using Model TA-2100 smarter gas detection transmitters. |
MODCOMP, Inc. | ScadaBase Real-time SCADA Application | Software - SCADA: ScadaBase collects, delivers and presents real-time supervisory control and data acquisition information. Graphical displays assist plant operators with control operations to optimize processes in industrial and utility plants. ScadaBase is designed with portable UNIX?-based multi-user, multi-processing, and scalable capabilities. ScadaBase features exception-based processing for efficient low network traffic. Modular design allows for efficiency with update and add-on features, as well as a flexible user interface. Standard socket calls using interprocess communications allow software modules to be hosted on the same system or be distributed across TCP/IP LAN. ScadaBase can simultaneously support a large number of HMI operator consoles. Drivers are available for a variety of PLCs, FEPs, DCSs, RTUs, and other intelligent electronic devices. |
ModemTec s.r.o. | PLC modem, MT23R | Modem: The MT23R PLC modem is primarily intended for Modbus RTU communication protocol transmission over 230V powerline. The wide communication possibilities of the MT23T modem enable its usage either as master, slave or peer - peer mode where both modems are functionally equal. This capability in particular is applicable for Modbus protocol with dynamic master alternation configuration. |
Monarch Instrument | DataChart 2000 Paperless Recording System | Monitoring Hardware: The height='5' bgcolor='#dddddd'> |
Moore Industries International | HART-to-Modbus Converter, HCS | I/O Interface: Accepts and 'reads' the HART Digital Protocol Signal that rides on the 4-20mA wires of a Smart HART multivariable transmitter or valve; Converts the HART digital signal to serial (RS-485) Modbus RTU communication protocol to allow smart transmitters and valves to interface with Modbus-based systems. |
Morningstar Corporation | TriStar | Controller: The TriStar is a charge,load,or diversion controller for solar powered systems. It is rated for 45A/60A of charge or load current. An opto-isolated serial DB-9 connector is provided to allow Modbus communication. Via Modbus, the user can adjust setpoints, set coils to perform functions, and log system parameters. |
Motor Protection Electronics | Duplexer Controller | Controller: The M.P.E. DUPLEXER is a low cost Modbus SCADA-ready pump controller designed to perform level control for duplex lift station applications. The level inputs can be connected to either four float switches or to a conductance probe. The Duplexer provides a 10-second power-up start delay, 5-second lag pump delay, and duplex alternation. LEDs provide power on status, level input status, pump call status, and high level alarm status indication. Pump 1&2 call and high level alarm relays are provided. HOA and lead select toggle switches are also provided. The high level status indication latches upon high level, until reset by pressing the reset push-button (the relay does not stay latched). Level simulation is accomplished by pressing and holding the push-button. Releasing the push-button allows the simulated level to return to normal. Connecting the serial port to a SCADA system allows the lift station to be monitored and controlled remotely. By connecting a programming device to the serial port (MPE p/n TSID), a number of settings may be accessed to customize the unit. |
Motor Protection Electronics | Station Controller SC1000 | Controller: The M.P.E. SC1000 is a Modbus SCADA-ready pump controller designed to perform level control in a wide range of lift station applications. The SC1000 operates the pumps based on the selected setup values and the wet well level signal. The level input source is menu selectable for either a 4-20 mA pressure transducer, or a 10 point conductance probe. The SC1000 alternates the pumps, performs lag pump delays, and provides high and low level alarms. The SC1000 has a variety of control options available in the setup menu that may be used to customize the controller for a specific application. |
Motor Protection Electronics | Station Controller SC2000 | Controller: The M.P.E. SC2000 is a Modbus SCADA-ready pump controller designed to perform level control in a wide range of lift station applications. The SC2000 operates the pumps based on the selected setup values and the wet well level signal. The level input source is menu selectable for either a 4-20 mA pressure transducer or a conductance probe. The SC2000 alternates the pumps, performs lag pump delays, and provides high and low level alarms. The SC2000 has a variety of control options available in the setup menu for customizing the controller for a specific application. Optional I/O is available for VFD speed control and for additional telemetry inputs. The controller can be ordered with up to four additional analog inputs and up to four additional analog outputs. |
MRO Stock Company | Modicon Quantum Family, 140CPU43412A, 140CPU11303, 140CPU53414B | Controller: Quantum Family CPU modules are used with the Unity software environment. The Quantum family of Programmable Logic Controllers are optimized for process control and high availability needs. |
MTL Open System Technologies LP | The Universal Server | Software - SCADA: The Universal Server provides comprehensive supervisory control capabilities while enabling HMI-based systems to gather real-time data and archive EFM (Electronic Flow Measurement) records. |
MTS Systems Corporation, Sensors Division | M-Series Model MG Transmitter with Digital Output | Sensor: The Level Plus® M-Series Model MG liquid level transmitter provides 3-in-1 measurement using one process opening for product level, interface level, and temperature measurements. Once the transmitter is installed and calibrated there is no requirement for scheduled maintenance or recalibration. |
MTS Systems Corporation, Sensors Division | Modbus Terminals for Tank Farm Applications | HMI Hardware: Modbus Terminals include touchscreen and LCD terminals, designed to provide a graphical display of tank data including the product level, water level, temperature, and volume and intended to be placed in the control room or in the tank farm for local indication. |
Multenet | EtherPad Digital I/O, PROD0203 | Network Gateway: The EtherPAD Digital I/O is a single port premium serial to Ethenet converter designed to withstand the harsh environments of the industrial markets. It has one serial port, supporting RS-232, RS-422, and RS-485, with a 10/100 Mbit Ethernet port. The Digital I/O provides a powerful interface for connecting digital signals to Ethernet via a customised solution. This product is available in different form factors: DIN Rail, 19' Rack Mount, and free standing. |
Multenet | EtherPad Lite, PROD0200 | Network Gateway: The EtherPAD Lite is a single port serial to Ethernet converter designed to withstand the harsh environments of the industrial markets. The EtherPAD Lite has a robust aluminium enclosure, and supports Modbus Slave Bridge functionality. This serial device server supports 10/100 Mbit Ethernet, RS-232, RS-422, RS-485, and is available in different form factors: DIN Rail, Rack Mount, and free standing. |
Multenet | EtherPad Duo, PROD0201 | Network Gateway: The EtherPAD Duo is a dual port premium serial to Ethenet converter designed to withstand the harsh environments of the industrial markets. It has two serial ports, both supporting RS-232, RS-422, and RS-485, with a 10/100 Mbit Ethernet port. This serial device server supports advanced Modbus Bridge functionality, as well as other advanced features including Routing and PPP. This product is available in different form factors: DIN Rail, Rack Mount, and free standing. |
MultiTrode Pty. Ltd. | MTT Protocol Translator | Network Gateway: The Translator enables MultiTrode controllers to communicate with all other SCADA systems such as Intellution, Wonderware, Citect or any system that accepts Modbus or DNP3. |
MultiTrode Pty. Ltd. | MultiSmart Pump Controller | Remote Terminal Unit: The MultiSmart product can be supplied as an RTU, or a pump controller, or both. As a pump controller it provides 'out of the box' control of water and sewer pump stations for up to 9 pumps. Graphical LCD user interface provides an intuitive operator interface. The I/O is flexible and digital inputs can be configured as contact closures, counters, conductive seal, thermistor, PT100, Flygt FLS/CLS. Modbus, DNP3 and an IEC61131-3 PLC option ensure an open interface. Communications is high-speed via Ethernet 10 Mbps or serial 115 kbps. |
Net Safety Monitoring Inc. | Banshee343 Ultrasonic Gas Leak Detector | Sensor: The Banshee343 is an advanced gas leak detection system utilizing four ultra-sensitve acoustic sensors which constantly monitor wide areas for ultrasound generated from the release of pressurized gas. |
NETdot3 | netrix | Network Gateway: netrix is an innovative system for the remote monitoring and control of Modbus enabled plant and equipment. It is a PC-free solution that web-enables installations, so that they can be managed from anywhere in the world using a simple web browser. It includes extensive security, data logging, and alarm/alert features. Designed for ease of configuration and operation, netrix connects directly to Modbus equipped systems. |
Network Innovations Inc. | Universal Communications Adapter | SCADA Hardware: The Universal Communications Adapter (UCA) provides integration of your SCADA and telemetry operations with satellite communications networks. The UCA interfaces with your RTUs to provide programmable scheduling, multiple holding registers to store files for local polling, programmable thresholds for report by exception monitoring, and the ability to make remote programming changes to RTUs. |
New Forest Electronics | SDA-02 | Monitoring Hardware: The SDA-02 is a handheld serial data analyzer which directly accepts RS232, RS485/422 or CMOS/TTL level signals without the need for adapters. |
NewElec | MA Series Motor Protection Relay | Misc. Hardware: NewElec's MA RELAY is aimed at satisfying all communication criteria relating to motor protection, particularly in the integrated process control market (control functions, motor protection, across multi-drop communications loops). It provides accurate, reliable protection including selectable communications protocols with emphasis on control. |
NEWRON SYSTEM | doGate | Network Gateway: doGate is an IP device that can communicate on several open standard protocols (LonWorks, BACnet, KNX, Modbus, M-Bus). With its simple and straightforward configuration and maintenance tool, users can easily configure their SCADA interface (BACnet or OPC), schedulers, gateways, trends and alarms. |
NEWRON SYSTEM | doMoov Gateway, DG4MP | Network Gateway: DG4MP is a software gateway that connects networks from different BMS protocols. It is possible to define gateways between BACnet objects, LonWorks network variables, KNX group addresses, Modbus coils and registers, M-Bus values and OPC tags (depending on the chosen reference). There is no license limitation in the number of gateways you can create. |
Niobrara Research & Development Corp. | Quantum Universal Comms Module | Network Gateway: Communication module in the Quantum form factor. Has two serial ports switchable RS-232/RS-485 and a 10BaseT Ethernet port. The serial ports are configurable for several protocols including Modbus RTU or ASCII. The Ethernet port can speak several protocols including Modbus/TCP. Use as a bridge, router, gateway, port expander, protocol converter or data concentrator. |
Niobrara Research & Development Corp. | Serial Port Expander, SPE4 | Network Gateway: The SY/MAX Port Expander has five RS-422/485 ports. Each port can be configured for one of 20 modes. Messages can be routed in any port and out any other port. It can be used as a protocol converter and data concentrator. The SPE4 can be used in a SY/MAX rack or stand-alone with an NRK2 single-slot rack. |
Niobrara Research & Development Corp. | Quantum ASCII Serial Module, QUCM-O | Network Gateway: Niobrara's Quantum Universal Communications Module (QUCM-O) is a user-programmable serial communication module for the Quantum(tm) PLC. It has two switch selectable RS-232/RS-485 serial ports and can appear to the PLC as either an I/O module or an option module. Add serial ports to the Quantum PLC or make a protocol converter or data concentrator. Out of the box it supports 20 serial port modes/protocols including all of the important Schneider protocols for North America. |
Niobrara Research & Development Corp. | Powerlogic Modbus Plus NIM, PMN | Network Gateway: The Powerlogic Modbus Plus NIM allows Powerlogic Circuit Monitors, other PNIM or RNIM devices, and Modbus RTU devices to be accessed from a Modbus Plus network. It has a Modbus Plus port and an RS-485 port. It can be mounted on the back of a Series 2000 Circuit Monitors or used stand-alone (P/N PMN-SA). |
Niobrara Research & Development Corp. | Powerlogic Ethernet NIM, PEN-T | Network Gateway: The Powerlogic Ethernet NIM allows Powerlogic Circuit Monitors, other PNIM or RNIM devices, and Modbus RTU slave devices to be accessed by Modbus/TCP and SY/MAX 802.3 Ethernet devices. It has a 10BaseT Ethernet port and an RS-485 port. It can be mounted on the back of a Series 2000 Circuit Monitor or used stand-alone (P/N PEN-T-SA). |
Niobrara Research & Development Corp. | Momentum ASCII Base, MUCM-002 | Network Gateway: The Momentum Universal Communications Module is a user programmable/ASCII base. It interfaces with all Momentum Communication Adapters and Processors and supports all Momentum Option Adapters. Bring ASCII data into any support network. It can be used stand-alone as a protocol converter or data concentrator. Niobrara has developed several applications which are available online. |
Niobrara Research & Development Corp. | Momentum Serial Tophat, MST | I/O Interface: The Momentum Serial Tophat has an RS-485 port. It is used for dropping Momentum I/O onto serial networks without requiring tophat programming. It supports all Momentum I/O bases as well as Square D's Seriplex(r) base and Niobrara's MUCM programmable ASCII base. It is available in several protocols, connectors, baud rates, and parities. |
Niobrara Research & Development Corp. | Modbus Plus / Ethernet Bridge, MEB-RT | Network Gateway: The Modbus Plus / Ethernet Bridge has a 10BaseT Ethernet port, a redundant-cable Modbus Plus port and two RS-422/485 serial ports. Devices on any port can access devices on any other port. It can be a data concentrator, Ethernet gateway or MUX, Modbus Plus gateway or MUX, Ethernet NIM, Ethernet protocol converter, or serial protocol converter. |
Niobrara Research & Development Corp. | Ethernet Port Expander, EPE5-T | Network Gateway: The Ethernet Port Expander has a 10BaseT Ethernet port and four RS-422/485 serial ports. It supports 20 serial modes and three Ethernet modes. Route in any port and out any other. It can be used in a SY/MAX rack or stand-alone with Niobrara's NRK2 single-slot rack. Use as a bridge, gateway, protocol converter, or data concentrator. |
Niobrara Research & Development Corp. | Compact ASCII Module, CUCM-O | Network Gateway: This Compact Universal Communications Module is user-programmable with two switch-selectable RS-232/RS-485 serial ports. Implement you own protocols or use an existing application for 3964(R), Caterpillar EMCP Genset, Caterpillar 3500 Engines, DNP 3.0, Dupline I/O, Allen-Bradley DF1, Elliott Flow Computer, ENRON/Daniel Modbus, Cutler-Hammer INCOM, GE Multilin 169 Plus, Johnson Controls N2 (Metasys), Mitsubishi UPS, Siemens SEAbus and SEAbus+, or Simpson Hawk meters. |
Niobrara Research & Development Corp. | Compact ASCII Ethernet Module, CUCM-OE | Network Gateway: This Compact Universal Communications Module is user-programmable with a 10BaseT Ethernet port and two switch-selectable RS-232/RS-485 serial ports. It can be used as a bridge, gateway, or data concentrator. Several application layer protocols have been implemented on Ethernet including Modbus/TCP, HTML/HTTP, SNMP (client or server), Cutler-Hammer INCOM, SMTP, Chat, Telnet, and FTP. |
Niobrara Research & Development Corp. | Compact Serial NOM, CNOS-001 | Network Gateway: This Compact Serial Network Option module for the Compact has two switch-selectable RS-232/RS-485 serial ports. Program the PLC from either serial port, add Modbus serial ports for your RTU application or use it as a protocol converter or data concentrator. |
Niobrara Research & Development Corp. | Compact Ethernet NOM, CNOE | Network Gateway: This Compact Ethernet/Serial Network Option module has a 10BaseT Ethernet port and two switch-selectable RS-232/RS-485 serial ports. Program the PLC from the Ethernet port or the serial ports. Use MSTR blocks to issue reads and writes out any port. It can also act as a bridge, protocol converter, gateway, or data concentrator. |
Niobrara Research & Development Corp. | RNIM - Modbus Converter, CAT2-SC | Network Gateway: Serial Protocol Converter and height='5' bgcolor='#dddddd'> |
Niobrara Research & Development Corp. | DDC2I RS-422/485 to RS-232 Converter | Network Gateway: The DDC2I is a DIN rail mounted optically isolated RS-232 to RS-422/485 converter. It is especially designed for use with Modicon? PLCs and Niobrara communication modules equipped with RJ-45 RS-232 ports. |
NIVUS GmbH | NivuLine Paperless Recorder | Monitoring Hardware: The NivuLine is designed for paperless data logging and evaluation of data. |
Nova Weigh | Model 400 DIN-rail Digital Weight Indicator | Misc. Hardware: The Model 400 is a weighing instrument for process vessel weighing and platform scales; Suitable where connectivity to PLCs and other types of control system is required. The DIN-rail mounting format is convenient for mounting into equipment panels. |
NovaTech Utility Solutions, LLC | NovaView Plus | Software - SCADA: NovaView Plus is a Microsoft Windows? based GUI software package providing all the data acquisition and control functions required for normal SCADA Master and HMI applications. NovaView Plus operates under the Microsoft Windows? operating system and uses a Microsoft Access or SQL Server as the database. NovaView Plus complies with Microsoft's Windows? Open Systems Architecture standards, such as dialog boxes, drop down menus, pop up windows, object re-sizing, etc. ActiveX controls provide visual images for breaker status, transformers, meters, manual switches, etc. Typical SCADA functions such as Passwords, Alarming, Data Archiving, and Tagging are available with the standard package. Additional functionality such as Trending, Dial-Up Voice Reporting, Text Reports, Load Forecast, Voltage Control, Redundant Masters, etc, are available for purchase. Development and runtime licenses are included with each copy of the software. |
NovaTech Utility Solutions, LLC | NovaTech Orion5 | Network Gateway: The Orion5 Automation Platform interfaces with Intelligent Electronic Devices (IEDs) using their legacy or industry standard protocols. Information is shared between IEDs, RTUs, PLCs, DCSs, HMIs, and SCADA masters. The Orion5 enables utility engineering, operations, planning personnel, neighboring utilities, state power pools and regional transmission groups to share critical information. |
NovaTech Utility Solutions, LLC | NovaTech Orion5r | Network Gateway: The Orion5r Automation Platform interfaces with Intelligent Electronic Devices (IEDs) using their legacy or industry standard protocols. Information is shared between IEDs, RTUs, PLCs, DCSs, HMIs, and SCADA masters. The Orion5r enables utility engineering, operations, planning personnel, neighboring utilities, state power pools and regional transmission groups to share critical information. |
NovaTech Utility Solutions, LLC | Bitronics M650 Series SCADA Meters | SCADA Hardware: Single-function and multifunction solutions for 3-phase metering |
Ocean Controls | Modbus View V 1.34 | Software - Other: ModbusView is a Modbus simulation program that can operate on a PC under Windows 95/98, ME, NT, 2000 and XP. The ModbusView program allows your PC to simulate both a Master and a Slave. It can communicate both in the RTU form and the ASCII form and it can also be set to a range of baud rates, data bits, parity and stop bits. With ModbusView you can fully test out your Human Machine Interfaces (HMIs or MMIs), instrumentation operations and PLC communications and operations. |
Ocean Controls | ISEE-Modbus V 1.10 | Software - HMI: The ISEE-MODBUS data acquisition program is a fully featured minimum cost HMI program for controlling and monitoring controllers, PLCs and instrumentation that use the Modbus protocol. Running under Windows XP/2000/NT/ME/98 it allows the user to interrogate multiple controllers, PLCs and instruments. |
Ocean Controls | VIEW-INTEGRA | Software - HMI: The VIEW-INTEGRA data acquisition program is a fully featured minimum cost HMI program for controlling and monitoring Crompton Instruments Integra 1500 series of Digital Meters. Running under Windows XP/2000/NT/ME/98 it allows the user to interrogate up to 30 digital meters. |
Ocean Controls | GWY-141 VantagePro2 Modbus Gateway | Network Gateway: The GWY-141 Modbus VantagePro2 Gateway allows the easy connection of a PLC, RTU (remote telemetry unit) or SCADA System to a Davis Instruments Vantage Pro2 Weather Station. |
Ocean Data Systems | Dream Report, v 4.63 | Software - HMI: Dream Report is a programming free, user-friendly, automated reporting and data analysis software designed specifically for industrial automation applications. It is designed to be the simplest solution for extracting data from virtually any data source. Dream Report will provide automated reports to anybody, anywhere and any time. Built on today's technologies, Dream Report fits perfectly for all types of reporting, from compliance reporting to performance, efficiency, and maintenance reporting in discrete, hybrid and process automation markets. |
OleumTech Corporation | H-Series, Continuous Liquid Level Sensor | Sensor: H-Series,Continuous Liquid Level Sensors deliver magnetostrictive sensing technology suitable for a wide variety of liquids and tank applications.. |
OMEGA Engineering, Inc. | Wall/Pipe Mount Temperature/Process Controller, CN3440-C4 | Controller: Wall/Pipe Mount Temperature/Process Controller for Single Output, Heat/Cool, or Motorized Valve Control. |
Omron Electronics LLC | E5CN/E5CN-U Digital Temperature Controller | Controller: Basic Temperature Controller with enhanced functions and performance, including improved indication accuracy and preventive maintenance function. |
Omron Electronics LLC | MX2 Series Inverter Drive | AC/DC Drive Control: The MX2 product line includes more than a dozen inverter models to cover motor sizes from 1/8 horsepower to 20 horsepower, in either 240 VAC or 480 VAC power input versions. |
Open Control Solutions | Pump Control Device (T2000) | Controller: The Total Control Unit (T2000) is a constant-speed pump controller for Lift Station and Tank with Well Pump applications. |
Open Control Solutions | RIO32 I/O Device | I/O Module: The RIO32 is a an ?open architecture? high-density railmounted I/O device. The RIO32 supports Modbus ASCII, RTU and TCP protocols. This device is used for local and remote monitoring and control over wide-area Radio and Ethernet networks. |
Open Control Solutions | RIO128 I/O Device | I/O Module: The RIO128 is a unique ?open architecture? high density railmounted I/O device. The RIO128 supports Modbus ASCII, RTU and TCP protocols. This device is used for local and remote monitoring and control over wide-area Radio and Ethernet networks. |
Open Control Solutions | Hyper SCADA Server | SCADA Hardware: Hyper SCADA Server is a self-contained data collection and information server housed in a lockable wallmounted enclosure Using Client-Server Architecture, the Human Machine Interface (HMI) is a typical Client Desktop PC connected to the Hyper SCADA Server using any one of the multiple connectivity options. The Hyper SCADA Server couples the power of networking with the stability and versatility of the Linux Operating System and MySQL to offer a SCADA System Server that is secure, fast and reliable. |
Open Control Solutions | RAIL Network Adapter, RNA110 | Network Gateway: The RAIL Network Adapter is a DIN-rail mounted serial-to-network converter. The RNA110 allows an RS-232 device to communicate over Ethernet TCP/IP. The RNA110 features a male RS-232 serial interface that enables 1200-38400 baud communications via Modbus TCP protocol. |
Optimation, Inc. (Nematron subsidiary) | OptiLogic OL 4228 | Remote Terminal Unit: The OL4228 8-slot base extends the OptiLogic family of products to systems using Modbus TCP/IP communications. Any Modbus TCP/IP capable, PC-based application can interface with OptiLogic Ethernet I/O. Optimation's OptiLogic? RTU provides point of use I/O and operator panel capabilities with a high speed link to a PC. |
ORMEC Systems Corp. | HMI-320 and HMI-640 | HMI Hardware: flatpanel touchscreens |
ORMEC Systems Corp. | XD-Series Indexing Servo Drives | AC/DC Drive Control: High-performance, networked, multi-axis integrated motion controllers |
ORMEC Systems Corp. | SMLC-SA | Controller: The SMLC-SA combines ORMEC's drive technology, ORMEC's motion technology and PLC capabilities of the SMLC together with the IEC 61131-3 programming flexibility into a single, compact, cost-effective package. |
OZM Research sro | Modlink | Software - Programming: A set of native VCL components that allows you to integrate the ability of communication via Modbus protocol over a variety of networks into your applications created using Borland Delphi. For the extensive list of all supported features please refer to the website. |
Parijat Controlware, Inc. | Modbus Analyzer | Software - Testing and Simulation: Analyzer designed for troubleshooting Modbus-based networks from small to enterprise-wide applications. |
Particle & Surface Sciences Pty. Ltd | POLA 3000 Particle Size Analyser | Sensor: The POLA 3000 is an online particle size and shape analyzer especially designed for the analysis of free-flowing powders and granulates of a size from 40 microns to 100mm. |
Partlow brand (Danaher Industrial Controls) | MLC 9000+ MODBUS/TCP Bus Communication Module | Controller: The Modbus/TCP Bus Communications Module (BCM) is part of the MLC 9000+ DINRail mount PID control system. The BCM handles communication between up to 8 single or multiple loop controller modules and the Modbus/TCP network. Systems larger than 32 loops can be built using multiple BCMs, within the limitations of your Modbus/TCP system. |
Passport Networks Inc. | MODport 101/102/111/112/104 | Network Gateway: Reliable communication between RS232/422/485 networks and IP networks featuring Modbus protocol |
PCI Lighting Control Systems | Modbus Gateway for ControlKeeper | Network Gateway: System accessory for the ControlKeeper lighting control systems. It provides a communications link between a MODBUS? controller system and PCI's RS-485 lighting control network. This allows a MODBUS? control system to operate and check status of relays within a PCI Lighting Control System. |
PCN Technology, Inc. | Grid MicroCircuits Module EC-3482 | SCADA Hardware: The EC-3482 Grid MicroCircuits™ module multiplexes medium bandwidth Ethernet data simultaneously with existing RS-485 serial data operations. These modules allow continued use of legacy SCADA protocols without degradation of existing network signals or limiting system functionality. With IP-485 technology, users can expand and update existing legacy serial data buses using twisted pair networks and transport Ethernet communication on the same twisted pair. |
Pegasus Automation International, LLC | Programmable Controller Unit, Pegasus EC | Remote Terminal Unit: Pegasus EC is an advanced programmable controller which has built I/O. The EC is a powerful programmable unit, able to work standalone or connecting with larger network. |
Pepperl+Fuchs | IDENTControl Compact | Controller: The IDENTControl Compact family of one- and two-head RFID controller solutions complements the company's family of four-head IDENTControl RFID controllers. |
Pepperl+Fuchs | ENX Series AS-Interface Gateways | Network Gateway: ENX Gateways form an interface between the AS-Interface and higher-level buses. The gateways act as a slave for the higher-level bus. |
Perle Systems Limited | IOLAN DS I/O Device Server | Monitoring Hardware: Device servers for remote management and monitoring for Building Automation, Retail POS automation, Industrial Automation ? SCADA, Modbus Systems, Access Control and security, Environmental monitoring, and Data center and remote branch IT management. |
Phoenix Digital Corporation | Modbus Plug-and-Play Tools | Misc. Hardware: Phoenix Digital provides a complete set of Modbus Communication Tools (Modbus Port Expander Plus (MPE+) and Modbus Fiber Optic communication modules), providing higher throughput, greater flexibility, improved compatibility, and higher reliability than ever before possible with conventional Modbus communication equipment. Phoenix Digital's Modbus Port Expander Plus (MPE+) product operates as a Modbus Multi-Master Multiplexer, Network Server, and Communication Controller, all in one. Phoenix Digital's Modbus Optical Communication Modules provide Redundant, Fault Tolerant, Self-Healing, Multidrop Fiber Optic Communications for High Reliability Modbus communications. |
Phoenix Digital Corporation | Optical Communication Module for Modbus, Modbus PLUS, Ethernet, and Modicon Remote I/O | I/O Module: Redundant, Self-Healing, Multidrop Fiber Optic Connectivity for Modbus, Modbus PLUS, Ethernet, and Modicon Remote I/O communication networks. Real-time diagnostics monitor network integrity and locate fault and impending fault conditions on-line, without disrupting network communications. |
Phoenix Digital Corporation | Optical Communication Modules for Modbus, Ethernet, and GE Fanuc Genius and SNP Networks | I/O Module: Redundant, Self-Healing, Multidrop fiber optic connectivity for Modbus, Ethernet, and GE Fanuc Genius, and SNP (Series 90 Protocol) networks. Real-time diagnostics monitor network integrity and locate fault and impending fault conditions on-line, without disrupting network communications. |
Phoenix Digital Corporation | Optical Communication Module for Modbus, ControlNet, Ethernet, Fast Ethernet, and Rockwell Data Highway Plus?, Remote I/O, SLC 500? DH-485, DF1, and RS-232/422/485 networks. | I/O Module: Redundant, Self-Healing, Multidrop Fiber Optic connectivity for Modbus, ControlNet?, Ethernet, Fast Ethernet, and Rockwell Data Highway Plus?, Remote I/O, SLC 500? DH-485, DF1, and RS-232/422/485 networks. Real-time diagnostics monitor network integrity and locate fault and impending fault conditions on-line, without disrupting network communications. |
Ponsel | Nephelometric Turbidity Sensor, NTU | Sensor: The Nephelometric Turbidity Sensor, NTU uses measurement principle of IR nephelometry/880 nm (ISO 7027). The sensor can be calibrated with a formazine standard solution. It integrates a low-cost optical technology, with a little maintenance and no consumables. The NTU can be connected to any type of transmitters, display unit, controller or data logger with Modbus RS-485 or SDI-12 inputs. Used in urban wastewater treatment (inlet/outlet controls), sanitation networks, industrial effluent treatment, etc. |
Ponsel | Conductivity/Salinity Sensor, C4E | Sensor: The Digital C4E sensor stores calibration and history data within the sensor. This allows a 'plug and play' system without re-calibration. Thanks to the Universal Modbus RS485 protocol, the PONSEL Digital C4E can be connected to all devices commonly used (Datalogger, Controller, Automat, Remote System...). |
Ponsel | Inductive Conductivity Sensor, CTZN | Sensor: The digital CTZN sensor stores calibration and history data within the sensor. This allows a 'plug and play' system without re-calibration. Using Modbus RS485 protocol, the Digital CTZN can be connected to all devices commonly used (Datalogger, Controller, Automat, Remote System...). Applications in urban wastewater treatment, industrial effluent treatment, surface water monitoring, sea water, fish farming |
Ponsel | Optical Dissolved Oxygen Sensor, OPTOD | Sensor: The OPTOD is based on luminescent optical technology. The OPTOD sensor is approved by the ASTM International Method D888-05. Thanks to an ultra low power technology, the OPTOD sensor meets the demands of field works and short- or long-term campaigns. Without oxygen consumption, this technology allows an accurate measure in all situations, and especially in very low oxygen concentrations. The OPTOD sensor stores calibration and history data within the sensor, allowing a 'plug and play' system without re-calibration. Used in urban wastewater treatment, industrial effluent treatment, surface water monitoring, sea water monitoring, fish farming, etc. |
Ponsel | Numerical multiparameter probe, TRIPOD | Sensor: The numerical TRIPOD allows measurement of up to 9 physico-chemical parameters at the same time, dedicated to the quality of water. Used in wastewater, surface water, fish farming, aquaculture, and drinking water. |
Ponsel | pH, REDOX & Temperature Sensor, PHEHT | Sensor: The PHEH sensor is designed to perform under hard conditions from pure mountains water with conductivity as low as 20 micro S/cm, lakes and rivers (100 - 2000 micro S/cm), seawater with conductivities of 50 mS/cm and to wastewater with conductivity higher than 200 mS/cm. This sensor features a 'long life' reference. The Plastogel® PONSEL technology increases the lifetime of the probe. This sensor is also designed for handheld and in situ applications that are difficult situations for a pH/ORP sensor in terms of sensor resistance, quick time response, minimal flow dependence and low power consumption. |
Poseidon Systems | Trident DM4500 | Sensor: The Trident DM4500 is an in-line fluid sensing technology for the detection of metallic wear debris and particulates in a lubrication system. Through continuous monitoring for wear metal generation the device alerts users to developing faults allowing for proactive maintenance planning and reduced maintenance costs. |
Poseidon Systems | Trident AP2100 | Network Gateway: The Trident AP2100 is a small form embedded computing device specifically designed to provide network connectivity and data logging for Modbus sensing devices offered by Poseidon Systems and 3rd parties. The device can be used as a standalone data logger, or connected to the Internet via Ethernet to provide remote visibility of sensor data. The AP2100 can present data as collected or process it via Lua scripting. |
Power Distribution, Inc. | WaveStar BCMS Hub System | Monitoring Hardware: The WaveStar BCMS Hub system collects data from up to 32 PowerWave Bus end feeds and associated tap-off boxes. It captures each PowerWave device's load in real time and presents the data through a touch screen or shares it with the data center building management system through SNMP or Modbus protocol. |
Precision Digital Corporation | PD8-6080 - PD8-6081 Super Snooper Modbus Scanners | Monitoring Hardware: The ProtEX-MAX PD8-6080 explosion-proof Modbus® scanner displays up to 16 Modbus process variables (PVs) on the bus using its RS-485 serial input. It also includes all the features of our PD8-6060 dual analog input meter, accepting two independent voltage or current signals, and scaling them for display in engineering units. |
Precision Digital Corporation | PD6088/89 ProVu Super Snooper Modbus Scanners | Controller: The ProVu PD6088/89 Series Super Snoopers are NEMA 4X 1/8 DIN panel indicators with decimal or feet & inches display options. The scanners can be set up as Modbus RTU Masters, Slaves, or Snoopers, monitoring multiple Modbus devices for up to 16 process variables. |
PRI Ltd. | Elite (EL707221, EL707225, EL707421, EL707425, EL708421, EL708425) | Monitoring Hardware: Multi-function panel meters with modular I/O |
PRI Ltd. | Series 400 multi-function meters | Monitoring Hardware: Panel-mounted multi-function meters |
Procon Electronics | MOD-MUX Modular I/O System | I/O Module: MOD-MUX is an innovative modular I/O solution for distributed I/O requirements. The MOD-MUX system consists of stand-alone digital and analog input and output modules connected together on a RS485 two-wire multi-drop network using the Modbus protocol. |
Pyramid Solutions, Inc. | BridgeWay Ethernet to DeviceNet Gateway, AB7603 | Network Gateway: The BridgeWay Ethernet to DeviceNet Gateway seamlessly connects EtherNet/IP Scanner and Modbus TCP Master PLCs and HMIs to a DeviceNet network. The AB7603 provides full DeviceNet Master (or Slave) functionality allowing connectivity to 63 DeviceNet slave devices. In addition to industrial automation protocols, the AB7603 supports IT protocols such as SMTP, FTP, and HTTP. It provides an internal web server to allow remote viewing of status and data via a web browser and offers email and file transfer capabilities to enhance your application. |
Pyramid Solutions, Inc. | BridgeWay Ethernet to J1939 Gateway, AB7645 | Network Gateway: The BridgeWay Ethernet to J1939 Gateway supports EtherNet/IP and Modbus TCP protocols over Ethernet. The AB7645 can operate as an EtherNet/IP Adapter Class device, allowing an EtherNet/IP Scanner to read and write J1939 network data. The AB7645 can also operate as a Modbus TCP Slave, allowing a Modbus TCP Master to read and write J1939 network data. Pyramid Solutions offers a free Windows-based configuration tool that allows the user to map J1939 parameter (PGN) data into input and output tables accessible over EtherNet/IP (via Assembly data) or Modbus TCP (via Register data). |
Pyramid Solutions, Inc. | BridgeWay J1939 to Modbus Interface, AB7606 | Network Gateway: The BridgeWay J1939 to Modbus Interface provides connectivity between a Modbus RTU (RS485 serial) network and a J1939 (CAN) network. The AB7606 operates as a Modbus RTU Slave device, allowing a Modbus RTU Master to read and write J1939 PGN data. Pyramid Solutions provides a free downloadable Windows-based configuration tool (BWConfig) for the AB7606. This PC-based software enables mapping of J1939 parameter (PGN) data into the AB7606 I/O table memory, which is accessible from a Modbus RTU Master as Modbus registers. |
Quest Controls, Inc. | TELSEC MINI(tm) PLUS | Monitoring Hardware: The TELSEC MINIPLUS is a surveillance solution to monitor environmental conditions, DC power and other alarm contacts in a remote cabinet or small shelter. |
QuickSilver Controls Inc. | SilverNugget | AC/DC Drive Control: Servo controller/driver for NEMA 17 & 23 frame microstep motors. |
RACO Manufacturing and Engineering Co. | Catalyst Alarm Notification System | Monitoring Hardware: Integrated, interactive, data logging and alarm notification system |
Raster Products BV | Iris SCADA | Software - SCADA: Iris SCADA can be stand-alone or can run as a Client/Server configuration. In Client/Server configuration, the server collects the PLC data and distributes the data to the clients. If required, a client can also run on the server PC. |
Raytek Corporation | MI3 Infrared Pyrometer | Sensor: The MI3 infrared pyrometer is a two-piece system with a miniature sensing head and separate communications electronics. |
RealFlex Technologies Ltd. | RealFlex 6 | Software - SCADA: Real-time SCADA software package for SCADA and process control applications |
Red Lion Controls | PAXDR - 1/8 Din Dual Rate Meter/Totalizer | Monitoring Hardware: The PAXDR is a 5-digit Dual Rate Indicator and 6-digit Dual Totalizer in a single meter. |
Reliable Controls Corporation | MACH-ProSys Building Controller, MPS, MPS-H | Controller: The MACH-ProSys(tm) is a powerful 32-bit based BACnet? device that delivers value in a high performance building controller. The MACH-ProSys(tm) provides high speed 10/100 Ethernet, SMART-Net communications, 12 inputs and 8 outputs, and protocol support for BACnet?, RCP, and Modbus RTU and TCP (both master and slave). The MACHProSys(tm) controller database allows users to define up to 160 universal I/O on a single address. Additional I/O points are added to the MACHProSys(tm) using MACH-ProPoint(tm) I/O expansion modules. Up to 7 MACH-ProPoint(tm) expansion modules can be added to each MACHProSys(tm) controller. |
Reliable Controls Corporation | Modbus-Link Portal | Network Gateway: The MODBUS-Link portal is a multi-protocol (Modbus, Reliable & BACnet), fully programmable communications device that provides connectivity between Modbus networks and any Reliable Controls MACH-System. The MODBUS-Link portal provides a 10BaseT connection to an Ethernet backbone, a 2 wire-EIA-485 connection to Modbus devices, and a EIA-232 connection to service PC or Modem communications. The MODBUS-Link portal ships standard with robust powder-coated steel packaging and removable connectors. |
Reliable Controls Corporation | MACH-ProCom Building Controller, MPC | Controller: The MACH-ProCom(tm) is a 32-bit based BACnet? device that delivers unprecedented value in a high performance building controller. The MACH-ProCom(tm) provides high speed 10/100 Ethernet, SMART-Net communications, expandable I/O, and protocol support for BACnet?, RCP, SMTP, and Modbus RTU and TCP (both master and slave). The MACHProCom(tm) controller database allows users to define up to 160 universal I/O on a single address. Points are added to the MACH-ProCom(tm) using MACH-ProPoint(tm) I/O expansion modules, up to 8 of which can be added to each MACH-ProCom(tm) controller. |
Renu Electronics Pvt. Ltd. | Serial-to-Serial Protocol Converter, GWY-00 | Network Gateway: Compact serial-to-serial protocol converter |
Renu Electronics Pvt. Ltd. | Remote Digital I/O, RDIO | I/O Module: DIN rail or panel mounted compact Digital I/O module |
RF DataTech | ART Radio Modem Series | Modem: DIN rail mountable, ultra low current consumption data radio modems for use in stand-alone radiotelemetry applications or as a remote radio in scanning telemetry radio systems or SCADA networks. |
RF DataTech | SRT Radio Modem Series | Modem: DIN rail mountable, ultra low current consumption data radio modems is designed for use in scanning telemetry radio systems, SCADA networks or in stand-alone radiotelemetry applications. |
Richards Zeta Building Intelligence, Inc. | RZ M2 Web-Based Controller | Controller: Internet Protocol (IP)-centric Intelligent Building solution leveraging existing building assets and infrastructure. An advanced hardware and software package, the Richards-Zeta M2 combines the power and feature sets seen in RZ products such as the Mediator and moZaic. Richards-Zeta?s (RZ) perfectHOST software leverages systems and sub-systems supported by and connected to the M2, including LonWorks, BACnet, Modbus and 40 plus additional drivers, including Johnson N1/N2, BC NW8000, Staefa Smart 1-2, Trane Tracer ?UCM, CSI MR, and others. |
RKC Instrument Inc. (Rika Kogyo Co., LTD) | FB900/400 Controller | Controller: The FB Series is a high performance process controller with a more advanced Brilliant II PID, autotuning, advanced tuning, selectable sampling cycle time of 0.05/0.1/0.25 second and 0.1 % of accuracy in short depth housing. |
RLE Technologies | MetricWise | Monitoring Hardware: MetricWise is a web-based appliance that collects metered information to calculate Power Utilization Effectiveness (PUE) and Data Center Infrastructure Efficiency (DCiE). |
Roper Associates | Events SCADA software | Software - SCADA: Events is a SCADA software package with the look and feel of standard Window programs. Events builds its own historical database and outputs reports in HTML format. Events includes networking, HTML output, task scheduler, real time displays, trends, reports, email output, and security; all in one. |
Ross Controls | D-Series Fieldbus Communication and I/O Modules | I/O Interface: Ethernet -(Modbus TCP, DeviceNet) supported Fieldbus Communication and I/O Modules for applications including welding, clamping and packaging |
Rotork Controls Ltd. | Modbus Module Mk2 | Misc. Hardware: The Modbus Module Mk2 gives the Rotork range of actuators the capability for direct serial communication over an RS485 highway as an RTU slave. |
Rotork Controls Ltd. | P3 Master Station | Controller: The Rotork P3 Master Station provides a high integrity link from the DCS to the valves in the field. It includes a keypad and color display screen to allow operators and engineers to control and monitor any of the attached valve actuators at any time. Dual Ethernet communication ports are provided capable of serving web pages to a standard PC and/or Modbus TCP communication to a dedicated control system. RS232 and RS485 serial ports are also provided for Modbus RTU communication. |
Sales Technology, Inc. | CMCP420AD8 A/D Converter | Network Gateway: The CMCP420AD8 is a packaged A/D converter available with Modbus RTU communications. The unit will accept the 4-20 mA signals from up to eight CMCP420VT loop-powered vibration transmitters. The CMCP420AD8 allows you to use existing networks within a plant to communicate with a PLC or DCS. |
SAMSON AG | Programmable Logic Controller (PLC) TROVIS 5571 | Controller: PLC designed for heating, ventilation and air-conditioning systems. Modbus master interface for communication with other Modbus instruments (e.g., TROVIS 5576, 5579). |
SAN Telequip Pvt. Ltd. | Modbus ASCII/RTU Gateway | Network Gateway: The Modbus ASCII/RTU Gateway acts as an interface between any Modbus (RTU) device and any Modbus (ASCII) device. It consists of a CPU card and a SMPS. This Gateway supports three serial communication ports, COM1, COM2 and COM3; 32k SRAM; 8K of serial EEPROM; Watchdog timer; and 32k memory mapped for general purpose input/output ports. |
Sapia, Inc. | MAC202 RS-232 to RS-485 Converter | Network Gateway: Industrial grade interface between RS232 serial devices and RS485 multi-drop networks. |
Sartorius Mechatronics UK Ltd | Ethernet Transmitter PR 5230 | SCADA Hardware: The 5230 is a product for reading out and transmission of weight values to installed networks and control systems. |
Sartorius Mechatronics UK Ltd | Process Indicator X3 | Monitoring Hardware: The X3 Process Indicator provides a solution for process hopper scales with strain gauge load cells in process automation applications. Information can be transferred into supervisory systems with the integrated OPC-Server technology. |
SATEC Ltd. | C192PF8 Power Factor Manager | Monitoring Hardware: The C192PF8 Power Factor Manager measures power factor for control of up to 8 capacitor banks. |
SCADAMETRICS | EtherMeter (Model EM-100) | I/O Module: A flow meter interface for SCADA, Telemetry, and Building Automation Systems: The EtherMeter is an industrial protocol translator built to work with encoder-type and pulse-type flow meters -- especially water, gas, and petroleum meters. On the automation side, it communicates using Modbus (RTU/ASCII/TCP), DF1, and EtherNet/IP. On the meter side, it is compatible with water, natural gas, and petroleum meters from Sensus, Neptune, Badger, Itron, Elster-AMCO, Kent, ABB, Hersey, Master Meter, Siemens, plus most pulse-based meters. When the EtherMeter is used with AMR protocol-enabled meters, it eliminates the totalization errors that can plague pulse-based meter-reading techniques. Target applications include water plants, pumping stations, master meter stations, automated buildings, and commercial sub-metering. |
SCHENCK AccuRate | LC Series Low Range CONI-FLEX MECHATRON Feeder | Misc. Hardware: Low-range minor ingredient screw feeder |
Schweitzer Engineering Laboratories | Feeder Protection Relay, SEL-751A | Misc. Hardware: Feeder Protection: Maximize control scheme flexibility with time- and instantaneous- overcurrent, overvoltage, undervoltage, and frequency elements. Use the four programmable pushbuttons on the front panel for quick, personalized control. Choose from Ethernet or serial communications and several protocols, including MIRRORED BITS? and IEC 61850. Pick a single Modbus? TCP or multiple Modbus Serial sessions for custom configuration of your application. |
Sena Technologies, Inc. | IALink100-Modbus | Network Gateway: Sena Technologies IALink100-Modbus is an industrial device server that enables modbus-based serial devices to be connected to Ethernet using industry standard MODBUS/TCP protocol, for industrial automation. |
Sentry Equipment Corp | Automatic Sampler Controller, Model SBC | Controller: Standalone controller specifically designed for use with Sentry samplers |
Seven Technologies A/S | MODBUS/TCP Driver | Misc. Hardware: Device Driver for 7-T's IGSS32 SCADA product |
Shimadzu Scientific Instruments | TOC (total organic carbon) Analyzer, TOC-4200 | Monitoring Hardware: TOC-4200 is a high-performance on-line TOC (total organic carbon) analyzer for continuous water quality monitoring. |
Sielco Sistemi srl | IOlog | SCADA Hardware: IOlog is a distributed data acquisition system based on SS3000 I/O modules and SCADA Winlog Pro software. SS3000 I/O modules provide different types of input (digital, 20 mA, 10 V, Pt100, TC) and output (digital, relay, 10 V, 20 mA) channels. |
Siemens Energy & Automation, Inc. | Model 353 Process Controller | Controller: The 353 is a stand-alone, panel-mounted, industrial controller that can serve as a simple single loop or as a multi-loop with complete continuous and ladder logic capability for small unit batch or continuous process. The controller includes a variety of built-in I/O, I/O can be extended using remote Ethernet Modbus TCP modules. |
Siemens Energy & Automation, Inc. | Model 353R (iPac) Process Controller | Controller: The 353R (iPac) is a stand-alone, rack-mounted, industrial controller used in a broad range of process control applications. It serves as a multi-loop with complete continuous and ladder logic control capability for a small unit batch or continuous process. It can be furnished with up to 32 plug and play I/O modules to handle complete I/O requirements. It can be networked using Modbus RS485 or Modbus TCP. Part of the controller family includes HMI software that comes with Modbus RTU and Modbus TCP OPC servers that automatically generates the controller database, based on the controller configuration, for simple connection to the controller. |
Sierra Instruments | Innova-Mass Cryogenic Vortex Flow Meter | Monitoring Hardware: The Innova-Mass Model 240 cryogenic version is designed for measuring mass flow rates of cryogenic fluids down to -328°F (-200°C). Using a special cryogenic temperature RTD, mass calculations are done with the latest density equations of state for liquid Oxygen, Nitrogen, Argon, and CO2. |
SIMEX Sp. z o.o. | MultiCon CMC-141 | Controller: Multicon CMC products are versatile, compact multichannel-controllers with a capability to record data. MultiCon CMC?141 integrates advanced control functions (PID, ON/OFF, time & profiles etc.) and logging of setpoints, excitations and current state of controlled objects. |
SIMEX Sp. z o.o. | TRS-B1a Sound Signal Device | Monitoring Hardware: The TRS-B1a sound signal device is designed to signal events with a sound or light. It is controlled by means of RS-485 link, which allows for activating of the sound signal (a buzzer with variable tone) and/or light signal (a flickering diode). |
SIMEX Sp. z o.o. | TRS-10a Indicator | Monitoring Hardware: The TRS-10a wall mounted indicator is designed to display digital values and short, 4-letter messages. |
Simply Modbus | SimplyModbus | Software - Other: Data Communication Test Software to test and debug Modbus systems |
SIPOS Aktorik GmbH | Modbus RTU 1-Channel; Modbus RTU 2-Channel | AC/DC Drive Control: SIPOS 5 Flash actuator with Modbus RTU interface, with torque range from 15 to 4000 Nm. Available as rotary, part-turn and linear actuator, speed variable, supplied with two different electronics versions, ECOTRON and PROFITRON. |
Sixnet, LLC | SixTRAK IPm(tm) Controller | Controller: The SixTRAK IPm(tm) is the ultimate process controller with the power of open LINUX software. Its powerful communications and advanced programming capabilities make it the perfect solution for your process control, SCADA, or DCS application. Though it is built-on the open LINUX operating system, no knowledge of LINUX is required in most applications. Get all the benefits of open LINUX with no extra effort. The SixTRAK IPm(tm) is 100% compatible with SIXNET's legacy SixTRAK Gateways. All existing ISaGRAF user programs will load and run in an IPm(tm) without any changes. |
Sixnet, LLC | VersaTRAK IPm(tm) RTU | Remote Terminal Unit: The VersaTRAK IPm(tm) is the ultimate open Remote Terminal Unit. This versatile RTU is loaded with powerful communications and advanced programming capabilities. Though it is built-on the open LINUX operating system, no knowledge of LINUX is required in most applications. Get all the benefits of open LINUX with no extra effort. The VersaTRAK IPm(tm) is 100% compatible with SIXNET's legacy VersaTRAK RTU. All existing ISaGRAF user programs will load and run in an IPm(tm) without any changes. |
Sixnet, LLC | SixTRAK I/O Controller | Controller: The SixTRAK I/O Controller (ST-GT-1210) can run an ISaGRAF IEC 61131-3 program, perform datalogging, and interface to thousands of I/O, all in real-time. Select this unit when you need a reliable way to control or monitor Ethernet, RS485, or local I/O, and then connect to a supervisory computer. It is perfectly suited for most control and data acquisition applications where some PLC-style programming is required. (This one I/O controller replaces most of SIXNET's legacy programmable SixTRAK I/O gateways). |
Sixnet, LLC | EtherTRAK I/O Gateway | Network Gateway: The EtherTRAK Redundant Ethernet I/O Gateway (ET-GT-ST-3) provides a redundant Ethernet interface for distributed I/O clusters. Use this advanced gateway to insure fault-tolerant I/O updates in your critical systems. |
Sixnet, LLC | EtherTRAK I/O Concentrator | I/O Interface: The EtherTRAK I/O Concentrator (ET-GT-ST-2) is a universal interface for your SIXNET and Modbus I/O. It provides transparent bridges between your Ethernet, RS232 or RS485 communications. It can poll your I/O modules or Modbus devices over one communication link and then make the data available over another. |
Sixnet, LLC | EtherTRAK Ethernet to Serial Gateway | Network Gateway: These gateways allow you to easily connect serial slave devices (e.g., a controller, PLC, RTU) to your Ethernet network. You can connect most slave (responding) devices to the serial port. The master (interrogating) device must be on the Ethernet side. The master's commands are passed from the Ethernet port to the serial port. The slave's responses are passed back in the other direction. These converters support many protocols and are especially ideal for Modbus and SIXNET slave devices. |
Sixnet, LLC | SiteTRAK RTU and Datalogger | Remote Terminal Unit: SiteTRAK (SR-4160-#) is an innovative combination of RTU (Remote Terminal Unit), Datalogger, Real-time database client, and telemetry interface in an installation-ready package. |
Sixnet, LLC | EtherTRAK Ethernet I/O Modules | I/O Module: EtherTRAK Ethernet I/O is a convenient and economical way to bring real-time Ethernet networking to the plant floor. EtherTRAK I/O provides 'process quality' and 'DCS-like' features in a compact industrially hardened package. |
Sixnet, LLC | RemoteTRAK RS485 I/O Modules | I/O Module: RemoteTRAK I/O is ideal for high performance communications over long distances. Modules link together with a single pair of wires at distances up to two miles using standard RS485 communications. This advanced 'Process Quality' I/O offers the high-end performance of a DCS system in a compact, affordable, open modular package. |
Sixnet, LLC | Industrial Telephone Modem | Modem: SIXNET Industrial Telephone Modems are specifically designed for industrial environments from -40 to +70?C! Connect these rugged modems to any PLC, RTU or any other industrial equipment that you need to remotely access. |
SMA America, LLC | SUNNY CENTRAL 500HE-US | Misc. Hardware: Inverter for large-scale PV power systems |
Smar UK Ltd | Foundation Fieldbus Universal Bridge | Network Gateway: The DFI302 is a programable bridge able to integrate Modbus (RTU & TCP/IP), Foundation Fieldbus (H1 & HSE), HART and conventional I/O in one unit. It supports Function Block programing and can be configured as either a Modbus Master or Modbus Slave. |
Smar UK Ltd | Modbus RTU and TCP/IP Processor | Network Gateway: The MB700 is both a Modbus TCP/IP & RTU Gateway and a Modbus Data Concentrator. The MB700 allows remote configuration and monitoring of devices that use the MODBUS RTU protocol by TCP/IP. |
Smar UK Ltd | Modbus RTU/TCP Ethernet Module | Network Gateway: The Enet-700 connects an Ethernet network to either RS485 or RS232, acting as a bridge for Modbus TCP/IP and Modbus RTU. The Enet-700 allows selection between RS-232C and RS-485. |
Smar UK Ltd | Modbus RS232 / RS485 Interface | I/O Interface: This device is a Modbus RS232 / RS485 Interface enabling Modbus RS232 devices to operate in a Modbus RS485 multi-drop environment. |
Smar UK Ltd | Modbus Serial to Fiber Optics Converter | Modem: The OPT-700 is a Fiber Optic Modem designed to provide a versatile connection between Modbus asynchronous serial communication interfaces such as RS-232c and RS-485 using Fiber Optic cable. It will allow any Modbus equipment that uses half-duplex, asynchronous serial communication at typical distances up to 4.0 km with the great benefit of EMI immunity. |
SoftPLC Corporation | SoftPLC ModbusIP Master | Software - Device Driver: SoftPLC is an embedded software product that turns a computer into a Programmable Controller. The ModbusIP Master driver for SoftPLC can be used to allow SoftPLC based systems to control ethernet I/O and HMI's and for peer-to-peer communications between controllers. |
SoftPLC Corporation | SoftPLC ModbusIP Slave | Software - Device Driver: SoftPLC is an embedded software product that turns a computer into a Programmable Controller. The ModbusIP Slave driver for SoftPLC can be used to allow SoftPLC based systems to communicate to HMIs and for peer-to-peer communications between controllers. |
SoftPLC Corporation | SoftPLC Modbus Slave Driver | Software - Device Driver: SoftPLC is an embedded software product that turns a computer into a Programmable Controller. The Modbus Slave driver for SoftPLC can be used to allow SoftPLC to communicate to HMI/SCADA/DCS systems and to other Modbus master devices. |
SoftPLC Corporation | Smart Gateway, SMG11 | Network Gateway: Smart Gateway products provide an intelligent and comprehensive way to interface devices on different communication networks. Protocol conversion between multiple Ethernet, serial and fieldbus networks can be done with virtually no data limits. Setup is easy, and logic functions are provided to provide alarm/error information, data manipulation/concentration, data logging, email, database interfaces, and more. |
SoftPLC Corporation | Smart Adapter, SMA11-x | I/O Interface: Smart Adapters provide a Modbus TCP/UDP remote I/O interface to SoftPLC's Tealware I/O, which can be used with a SoftPLC controller or any other controller that can drive ModbusTCP I/O. |
Software Toolbox Inc | Modbus Suite TOP Server | Software - Device Driver: Software Toolbox Server for Modbus Master (RTU/ASCII), Modbus Slave RTU, Ethernet TCP/IP Master and Modbus Plus can be used with a large variety of Modbus capable units including GE, Siemens, JBus, Elliot Flow Computers, Parlow Temperature and Chart Recorders, Omni Flow Computers, Magnetek drives and others. |
SolarBOS, Inc. | Smart String Combiners | Sensor: SolarBOS Smart String Combiners include a current sensor module that measures current of each circuit and transmits this information via Modbus/RS-485. SolarBOS Smart String Combiners come in 8 to 24 circuits and can be specified with single or dual output terminals rated for 90C. |
Solectria Renewables LLC | PVI 13KW - 15KW Inverters | Misc. Hardware: PVI 13KW and PVI 15KW are rugged, DSP-controlled PV inverters for grid connected commercial, industrial and uitility 3-phase PV systems |
SOR, Inc. | echOsonixTM Ultrasonic Transmitter | Sensor: Line powered level transmitters (models U71 & U73) use digitial Modbus communications, allowing users to have up to 128 transmitters communicating on one shielded, twisted pair cable. All echOsonix units can be polled in less than 2 seconds. A single I/O circuit can support up to 128 transmitters. The multi-sensor system with only 10 sensors can have response times up to 3 minutes. |
Spectrex | SharpEye 40/40 Series Flame Detectors | Sensor: Multi-Spectrum detectors that enable detection of small fires at distances up to 65m, with enhanced immunity to false alarms |
Spirax Sarco | TVA Flowmeter | Monitoring Hardware: The TVA steam flowmeter measures the complete flow range capturing all steam used. With no need for multiple pipe entries, the TVA can be installed in most confined spaces as it doesn?t require long lengths of uninterrupted pipe to ensure accuracy. |
SPLat Controls Pty Ltd. | CC18 Controller | Controller: Board-level programmable controller that provides 16 digital I/O points in any combination of inputs or outputs, as well as two analogue inputs for modern ratiometric sensors. The CC18 controller comes in a bare-board format designed for integrating into a product as a component part. |
StoneL Corporation | Prism Sensing & Communications Modules | Sensor: The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Valves. The platform offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting valve actuator operation. |
StoneL Corporation | Input/Relay Output Modules | I/O Module: This I/O module is designed to function as a Modbus (RS485) node with termination points for connecting switches/sensors as well as relay outputs to operate devices such as motors. |
SUNIX NCCI Co., Ltd. | SUNIX ioSCADA SM series | I/O Module: Series of industrial Modbus I/O supporting Modbus RTU & ASCII. |
SyxthSense Ltd | KLH-MB Transmitters | Monitoring Hardware: KLH-MB room temperature and humidity transmitters measure temperature in wide range of applications and can be used as Zone Output device. The KL-MB transmitters come with integrated Modbus RTU RS-485 communication interface. |
T&T Systems S.r.l. | ProfiPlug Modbus/Profibus Gateway | Network Gateway: Profiplug converts transmitted data from devices in MODBUS RTU standard into data in Profibus DP standard, enabling the access of measurement results into Profibus DP network. |
TAKEBISHI Corporation | DeviceXPlorer OPC Server | Software - OPC: DeviceXPlorer is OPC data access server software corresponding to the PLC controller of each vendor and supports various interfaces and protocols on Ethernet, serial, and proprietary networks. It is compatible with all versions of the OPC Data Access. |
taskit GmbH | gpio.AI model 544202 | I/O Interface: The gpio.AI modules provide eight analogue inputs designed to measure both voltage and current. They easily integrate into existing Modbus systems. An individual serial number allows identification and configuration even during operation. Furthermore, they offer an uniform register set covering the hole gpio.NET family. |
taskit GmbH | gpio.AO model 544206 | I/O Interface: The gpio.AO modules extend the gpio.NET Core interface by four analogue outputs and one frequency generator. They easily integrate into existing Modbus systems. An individual serial number allows identification and configuration even during operation. Furthermore, they offer an uniform register set covering the hole gpio.NET family. |
taskit GmbH | gpio.DIO model 544210 | I/O Interface: The gpio.DIO modules extend the gpio.NET Core interface by numerous features to capture, generate and process opto-decoupled digital signals. For example, functions such as PWM or frequency counters. They offer the possibility of creating customisable I/O configurations, to meet your application's specific needs. The modules easily integrate into existing Modbus systems. An individual serial number allows you to identify and configure them even during operation. Furthermore, they offer an uniform register set covering the hole gpio.NET family. |
taskit GmbH | gpio.Relais model 544214 | I/O Interface: The gpio.Relais modules offer access to four relays as well as four digital inputs. They extend the gpio.NET Core interface by features to measure and process opto-decoupled signals. The modules easily integrate into existing Modbus systems. An individual serial number allows you to identify and configure them even while operational. Furthermore, they offer an uniform register set covering the whole gpio.NET family. |
Techno Trade SA | Ethernet Remote I/O Modules | I/O Module: The RM modules connect a wide variety of electrical, electronic, and mechanical devices and sensors - such as pumps, temperature and pressure transmitters, motors and more - to computers and applications over standard Ethernet networks (Modbus TCP) or RS485 (Modbus RTU) or even to other controllers and PLCs. |
Temco Controls Ltd. | T3 Series I/O Modules | I/O Module: The T3 Series Modules are general purpose Input/Output modules for building integrators. Available in several Input/Output configurations, the T3 Series Module provides convenient termination for .eld devices and interfacing to HVAC, lighting, temperature sensors, and other typical building automation applications. |
Temco Controls Ltd. | TSTAT-5E Thermostat | Misc. Hardware: This full-featured CPU based thermostat is designed for small cooling and heating air handling systems in residential and commercial facilities. |
Texas Instruments (Sensors and Controls) | DiagnosTECH? Integrated Furnace Control | Controller: DiagnosTECH? is an integrated furnace ignition control board with diagnostic and monitoring capabilities. The control monitors the flame current, thermal limit, pressure switch and thermostat inputs in order to insure safe operation, while also logging any error code history with a relative time stamp. |
Thermo Electron Corporation | OLA-200 On-Line Elemental Analyzer | Misc. Hardware: The OLA-200 provides real-time elemental analysis of multiple slurry streams for optimization of minerals processes. |
Thermo Fisher Scientific Inc. | DataStick System | Sensor: Plug and play analytical measurement system for continuous use in industrial environments. Any analytical sensor head can be plugged in to any DataStick tube body to automatically obtain accurate and reliable measurements. |
Thermo Fisher Scientific Inc. | DataStick Local Monitor and Calibration | HMI Hardware: Sensor Display |
Thermo Fisher Scientific Inc. | APEX 100 Metal Detector | Sensor: The Thermo Scientific APEX 100 metal detector provides cost-effective protection from common metal contaminants found in food production. |
Thomas & Betts Power Solutions | CyberWave UPS | Monitoring Hardware: Uninteruptible Power Supply System for industrial applications. |
Tixi.Com GmbH | Tixi Alarm Modem, HG20 | Modem: Modbus master with build in GSM module. |
Tixi.Com GmbH | Tixi Alarm Modem, HM20 | Modem: Modbus master with build in PSTN module. |
Tolomatic, Inc. | Axiom PV Brushless Servo Controller/Drive | Controller: The Axiom? PV sequential motion controller features an integrated PLC, motion controller and drive. Windows?-based software uses a point-and-click sequential program and PLC ladder logic editor. |
TOPSCCC GmbH | Internet Embedded Controller EX9188END-MTCP Series | Controller: Internet Embedded controller with Modbus to TCP/IP gateway |
TopWorx, Inc. | Sensor-Communications Module | Sensor: The TopWorx Sensor-Communications Module combines position sensors, Modbus communication, solenoid outputs, and wiring terminals into a compact enclosure that is potted and sealed from the environment. |
Triangle MicroWorks, Inc. | Communication Protocol Test Harness | Software - Testing and Simulation: The Communication Protocol Test Harness is a Windows(tm) application that simulates Master or Outstation devices, monitors communications, or performs custom functional tests. A module to automatically perform the Modbus Conformance Test Procedures is included with the standard Modbus license. It can be configured through a GUI or Tcl/Tk scripts. A configurable database of simulation points allows emulation of standard off-the-shelf devices. Additional instrumentation such as voltage or current generators can be controlled to automatically establish a test condition and confirm the expected results through the communication protocol. |
Triangle MicroWorks, Inc. | SCADA Data Gateway | Software - Device Driver: The SCADA Data Gateway is a Windows(tm) application used by System Integrators and Utilities as an OPC Client/Server, Data Concentrator, or Protocol Translator. It supports the DNP3, Modbus, & IEC 60870-5 protocols. Translation to other protocols such as SNMP is supported by combining the SDG with another OPC Client/Server. |
Triangle MicroWorks, Inc. | Modbus Source Code Library | Software - Programming: Triangle MicroWorks (TMW) Source Code Libraries for DNP3, Modbus, and IEC 60870-5 are used by equipment vendors to cost-effectively implement these industry standard communication protocols directly in the target hardware. TMW's experience in developing communication protocol Source Code Libraries can shorten the time required to support these protocols, while allowing your engineers to focus on the company proprietary aspects of the product. Purchase includes one year of Maintenance and Enhancement Plan (additional years may be purchased), which provide support via e-mail, telephone or fax. Support includes assistance integrating the Source Code Library into your product as well as assistance troubleshooting any communications problems that may occur in the field. TMW's Communication Protocol Software Libraries are delivered in ANSI Standard C Source Code. They are designed to be both processor and operating system independent. Easy-to-use function based API will allow you to implement multiple combinations of Source Code Libraries on a single device by using many common utility files and conserving code space. |
Triangle Research International, Inc. | M-series PLCs | Controller: Internet-programmable embedded PLCs for OEM applications |
Triangle Research International, Inc. | Nano-10 Super PLC | Controller: The Nano-10 is a full-function PLC measuring only 3.3' by 2.8' and weighing 2.6 oz. It has a built-in Ethernet port which supports Modbus TCP Server and Client connections. |
Triangle Research International, Inc. | FMD88-10 Embedded PLC | Controller: The FMD88-10 is designed with ready connectivity to many peripheral device types. With the built-in Ethernet port and the iTRiLOGI client/server software, the FMD88-10 is fully accessible for machine monitoring and OEM troubleshooting/reprogramming over the Internet. Built-in RS232 and RS485 connections and Modbus support make the FMD88-10 easy to integrate into mixed-brand PLC environments and networks. |
Triatek Lighting, Inc. | E-LINK | Misc. Hardware: E-LINK is a Modbus RTU or ASCII gateway for Triatek Lighting, Inc. programmable relay and circuit breaker panels to communicate with a Building Automation, Process Automation, or Power Management Systems. |
Trihedral Engineering Ltd | VT SCADA | Software - SCADA: Designed for the water and wastewater industry, VTScada is a software tools layer that adds remote asset management features to VTS telemetry applications. |
Trio Motion Technology | Ethernet Daughter Board, P296 | Misc. Hardware: The Ethernet Daughter Board listens on the MODBUS port (502), and will read/write directly from/to the Trio VR global variables when the MODBUS holding register functions are used, or read/write from the Trio IO when the coil & input status functions are used. |
Trio Motion Technology | MC464 Multi-axis Motion and Machine Controller | Controller: MC464 multi-axis motion and machine controller module with I/O, status display, SD card memory expansion, axis synchronisation and programming ports. |
Trolex Ltd | TX9042/9044 Programmable Sensor Controller | Controller: Sensor controller with up to eight channels for any choice of analogue sensor or digital input, including gas detectors, flow sensors, pressure sensors and vibration sensors; temperature devices; frequency inputs and digital sensors. |
Trolex Ltd | Commander | I/O Interface: The Commander central processor controls up to 960 I/O field devices and RS485 MODBUS communications for SCADA systems. Plug-in intelligent I/O channel cards can be configured in any required combination to suit the system topology. |
TSI Incorporated | SUREFLOW room Controls | Controller: SUREFLOW? room controls are designed to maintain room balance in Variable Air Volume laboratories by ensuring that the exhaust is greater than or less than the supply by a set volume. SUREFLOW controls also directly control heating and cooling in the space to maintain a comfortable temperature. |
TURCK Inc. | Network Gateways, BL67-GW-EN & BL67-PG-EN | Network Gateway: ModBus TCP/IP Ethernet Gateways with Modular I/O; Fieldbus Independent Configuration; IP 67 Protection; Various I/O Styles |
TURCK Inc. | Network Gateways, BL20 | Network Gateway: Modbus TCP/IP Ethernet Gateways with Modular I/O; Fieldbus Independent Configuration; IP 20 Protection; Various I/O Styles |
TURCK Inc. | piconet® IP-link Coupling Modules and Extensions | I/O Interface: The busstop® coupling modules SxxL-0404D-000x are designed for direct connection of four binary inputs and four binary actuators to the higher level fieldbus Up to 255 extension modules can be connected via the IP link interface. |
Ultra Electronics, Nuclear Sensors & Process Instrumentation (Weed Instrument) | Modbus Remote I/O Electrical Interface, 2C14 module | Modem: Modular device to connect end devices over fiber optic cable using Modbus Remote I/O protocol. |
Ultra Electronics, Nuclear Sensors & Process Instrumentation (Weed Instrument) | RS-232/485 Electrical Interface, 2C10 Module | Modem: Modular device to connect end devices over fiber optic cable using RS-232/485 protocol. |
Unitronics | Unitronics M90/M91 OPLC | Controller: The M90/M91 OPLC is a micro-PLC with a built-in operating panel that contains an LCD display screen and full numeric keypad for easy man-machine communication. The M90/M91 offers a variety of expandable onboard I/O configurations, a two 16-character-text-line LCD and keypad (one line in the M90 models). 12 convenient models make the M90/M91 appropriate for water treatment, alarm systems, traffic signal control, automated production, process control (thermal, level, pressure), and many more. The M91 uses Modbus to create a multi-device network, and establish master-slave communication between M91 OPLC? units and any connected device that supports Modbus. |
Unitronics | Vision120 | Controller: The Vision120 supports up to 128 I/Os, and has two RS232/RS485 COM ports. The Vision120? Ladder software offers up to 448K of application memory and supports auto-tune multiple PID loops and Data Tables. Communication options include CDMA/GSM, Remote Access utilities, Modbus, CANbus and OPC server. |
Unitronics | Vision230 | Controller: The Vision230 is a high-performance PLC with an integral graphical operator panel and keyboard. The PLC can handle up to 171 I/Os via Snap-in and Expansion modules. The Ladder software offers up to 1000K of application memory and supports auto-tune multiple PID loops and Data Tables. Communication options include TCP/IP Ethernet, GPRS/CDMA/GSM, Remote Access utilities, Modbus and CANbus. |
Unitronics | Vision260 | Controller: The Vision260 is a high-performance PLC with an integral graphical operator panel and keyboard. The PLC can handle up to 171 I/Os via Snap-in and Expansion modules. The Ladder software offers up to 1000K of application memory and supports auto-tune multiple PID loops and Data Tables. Communication options include TCP/IP Ethernet, GPRS/CDMA/GSM, Remote Access utilities, Modbus and CANbus. |
Unitronics | Vision280 | Controller: The Vision280 is a high-performance PLC with an integral touchscreen graphical operator panel and keyboard. The PLC can handle up to 171 I/Os via Snap-in and Expansion modules. The Ladder software offers up to 1000K of application memory and supports auto-tune multiple PID loops and Data Tables. Communication options include TCP/IP Ethernet, GPRS/CDMA/GSM, Remote Access utilities, Modbus and CANbus. |
Unitronics | Vision290 | Controller: The Vision290 is a high-performance PLC with an integral touchscreen graphical operator panel. The PLC can handle up to 171 I/Os via Snap-in and Expansion modules. The Ladder software offers up to 1000K of application memory and supports auto-tune multiple PID loops and Data Tables. Communication options include TCP/IP Ethernet, GPRS/CDMA/GSM, Remote Access utilities, Modbus and CANbus. |
Unitronics | Vision350 | Controller: Palm-size PLC with diverse I/O options. Its 3.5? TFT touchscreen can show over 1000 displays, with 3.5 MB for images and fonts. The Vision350 supports up to 512 I/Os via on-board and I/O expansion modules. |
UPS Manufacturing s.r.l. | MultiCOM 301/302 | Monitoring Hardware: MultiCOM 301/302 is a device that provides users with two independent serial ports for monitoring of the UPS using different communication protocols. The SERIAL 1 port offers an RS-232 serial line through which the UPS can be monitored using GPSER protocol (a proprietary protocol for UPS device); the SERIAL 2 port offers an RS-485 Half-Duplex or an RS-232 serial line through which the UPS can be monitored using MODBUS protocol. |
Uticor | TouchPLC | HMI Hardware: Integrated HMI and PLC in one compact package, with SCADA-like features. |
UWT GmbH | Nivowave | Sensor: The Nivowave product family includes sensor, transducer and controller units for measuring solids (NW 5000) or liquids (NW 5000L). |
Vacon Oyj | Vacon 10 Machinery | AC/DC Drive Control: The Vacon 10 Machinery is an extremely compact AC drive for machine makers in the power range from 0.25 kW to 5.5 kW. |
Veris Industries, Inc. | Enercept H8035 and H8036 Series Energy Meters | Monitoring Hardware: Enercept? H8035 Series energy meters are 3-phase Modbus networked power meters used for basic energy services metering/submetering in commercial and industrial applications. These innovative meters combine the power metering electronics and high-quality industrial grade CTs in a single package that can be mounted directly inside an electrical panel. |
Veris Industries, Inc. | E50C Power Meter | Monitoring Hardware: The E50C2 Modbus RTU DIN Rail Meter combines performance and easy installation to deliver a cost-effective solution for power monitoring applications. |
vHMI Automation Inc. | ActiveX DLL Communication Drivers | Software - Device Driver: Modbus Ethernet TCP and Serial Master (RTU/ASCII) for Modicon PLC or any Modbus Slave |
Vibro-Meter, Inc. | Omniguard Model 760 | Sensor: Advanced multi-spectrum IR5 flame detector, which senses infrared radiation in five discreet infrared wavelengths for early fire detection for maximum protection of people, machinery, and facilities. The Model 760 also features Vibro-Meter's patented Fire Event Analysis algorithm, enabling high speed response and superior false alarm immunity. |
Viklele Associates | Black Diamond SCADA / HMI | Software - SCADA: Black Diamond SCADA is a data acquisition, process monitoring and control software that lets you build and deliver HMI/SCADA and reporting solutions with minimal effort. It is designed to provide data visualization suitable for factory floor operations, as well as to generate data and analysis reports that help process managers take informed and timely decisions. |
Viola Systems Ltd. | Arctic Modbus Gateway | Network Gateway: Arctic Modbus Gateway integrates serial Modbus devices to IP management systems via Ethernet or GPRS. Combining this to many other Modbus specific features Arctic Modbus Gateway is powerful and flexible building block for industrial Modbus communication. Also mobile operator independent systems (when GPRS is used) can be built with Viola M2M Gateway which provides virtual static IP addresses for Arctic devices. |
Visionary Electronics, Inc. | Micro-RTU | Remote Terminal Unit: Remote Terminal Unit designed for electric power utility and telecommunications industries |
Vulcain | Vulcain 301C | Monitoring Hardware: Digital gas detection controller |
VxI Power Limited | Oracle III 200e | Misc. Hardware: Battery-backed, switch-mode power supply |
VxI Power Limited | OPP-200 Programmable Modbus Power Supply | Misc. Hardware: From a compact 3U housing the PSU delivers an output power of 200W, with voltage programmable from 2 to 20V DC in steps as small as 1mV. The Modbus PSU is designed for test and instrumentation applications. |
Waterfall Security Solutions | Waterfall SME for Modbus | Monitoring Hardware: The WF-SME for Modbus enables secure, unidirectional, real time, and foolproof transfer of Modbus data from Industrial networks to Business networks. |
Watlow Electric Manufacturing Company | Series SD PID Temperature Controllers | Controller: The Series SD family of PID temperature controllers are programmable PID, high/low limit controllers using advanced technology. Suited for a broad range of applications in temperature and process control. |
Watlow Electric Manufacturing Company | Series 998/999 Process Controllers | Controller: The Watlow Series 998 vertical 1/8 DIN two-channel process controller and the horizontal 1/8 DIN SERIES 999 offer two channels of PID control in a single package. With up to six ouputs, the controller is designed to handle most applications where multiple processes need to be controlled. |
Watlow Electric Manufacturing Company | Series 988/989 Temperature/Process Controllers | Controller: Watlow's Series 988 (vertical) and SERIES 989 (horizontal) temperature/process controllers are designed and manufactured for the demanding requirements of the industrial controller market. |
Watlow Electric Manufacturing Company | Series F4 Ramping Controllers | Controller: Watlow's Series F4 ? DIN industrial ramping controllers offer an easy-to-set-up-and-operate solution for the most demanding ramp and soak and processing applications. The features and performance of these units make them ideally suited for environmental chamber or furnace and oven applications. |
Watlow Electric Manufacturing Company | Series 96 Controller | Controller: Watlow's Series 96 is a powerful 1/16 DIN dual-display controller that offers many advanced functions. This controller can be tailored to perform hardware and software needs with hardware modules that are pluggable and exchangeable, and software menus that may be user programmed to fit exact application requirements. |
Watlow Electric Manufacturing Company | Series 97 Controller | Controller: Watlow's Series 97 is a micro-processor-based controller with a single input, second auxiliary input and four outputs. The controller is versatile in handling applications that require a high/low limit, alarms, retransmit and communications. |
Watlow Electric Manufacturing Company | Series 981/982 Ramping Controllers | Controller: The Watlow Series 981 (horizontal) and 982 (vertical) are 1/8 DIN time/temperature profile controllers. They are designed with most typical programming needs in mind. |
Watlow Electric Manufacturing Company | Series CLS200 Multi-Loop Controller | Controller: The Watlow Series CLS200 controllers combine performance and flexibility with compact design. The four, eight and 16 loop versions provide complete control solutions for a broad range of applications. Each controller includes built-in serial communications. Optional features include programmable ramp-and-soak profiling, cascade control and process variable retransmit. The SERIES CLS200 controllers are UL? and C-UL? listed and carry the CE mark. |
Watlow Electric Manufacturing Company | Series MLS300 Multi-Loop Controller | Controller: The Watlow Series MLS300 controllers combine performance and flexibility with compact design. The 16 and 32 loop versions provide complete control solutions for a broad range of applications. Each controller includes built-in serial communications. Optional features include programmable ramp-and-soak profiling, cascade control and process variable retransmit. The SERIES MLS300 controllers are UL? and C-UL? listed and carry the CE mark. |
Watlow Electric Manufacturing Company | Series CAS200 Multi-Loop Alarm Scanner | Monitoring Hardware: The Watlow CAS200 alarm scanner provides 16 channels of alarm monitoring and data acquisition for a broad range of applications and processes. Its compact 1/8 DIN size, advanced features and superior performance make it ideal for industrial and laboratory applications that require reliable alarm monitoring and data analysis. The CAS200 is UL? and C-UL? listed and carries the CE mark. |
Watlow Electric Manufacturing Company | EZ-ZONE PM Panel Mount Temperature Controller | Controller: The EZ-ZONE PM panel mount controller offers options to reduce system complexity and the cost of thermal loop ownership. You can order the EZ-ZONE PM as a PID controller, an over/under limit controller or these functions can be combined into an integrated controller. |
Watlow Electric Manufacturing Company | EZ-ZONE RM Rail Mount Controller | Controller: The EZ-ZONE RM rail mount controller integrates multiple controller functions saving time, space and cost. The EZ-ZONE RM can be used as a PID temperature/process controller, an over/under limit controller or can combine these functions into an integrated controller. |
Watlow Electric Manufacturing Company | EZ-ZONE ST Integrated Controller | Controller: The EZ-ZONE ST integrated control loop solid state controller offers complete thermal system control in a single package solution. The EZ-ZONE ST offers a PID temperature controller connected to a high amperage solid state relay with the option of adding a properly sized heat sink, over/under temperature limit, shut-down power contactor, digital communications and remote user interface in one package. |
Watlow Electric Manufacturing Company | EM Gateway | Network Gateway: The EM gateway provides a quick, convenient and economical means of adapting controllers to Ethernet connectivity. Watlow's EM gateway has two main functions. It serves as a bridge between Modbus TCP/IP and Modbus RTU on EIA/TIA 485. It also provides an operator interface for Watlow controllers by serving web pages to an Internet browser to support key control operations such as process monitoring, set point changes, alarm management and error notification. |
Watlow Electric Manufacturing Company | WATVIEW | Software - HMI: WATVIEW is the HMI package for Watlow controllers. Use WATVIEW to setup, monitor and edit the values of controller parameters, to monitor and manage alarms, manage recipes and log and graph process data. |
Watlow Electric Manufacturing Company | EHG SL10 Process Controller and Safety Limit | Controller: The EHG SL10 process controller and safety limit integrates a heater, adjustable set point controller, high/low temperature alert, power switching device and a safety high temperature limit all in one package. This base unit controller also offers three upgrade modules: display module, communication module and display and communication module allowing you to purchase only what is required for your application. |
Webdyn S.A. | Webdyn Gateway - WGM10 (M) | Network Gateway: The Webdyngate Modbus10 is a 'plug and play' Modbus TCP gateway providing both local and remote monitoring services for Modbus connected devices. The gateway creates the connection from serial Modbus installations to LAN based networks (Modbus TCP). |
Webdyn S.A. | Webdyn Gateway - WGM20 (M) | Network Gateway: The Webdyngate Modbus20 is a Web enabled Modbus gateway providing both local and remote monitoring services for Modbus connected devices. The gateway creates the connection from serial Modbus installations to LAN based networks (Modbus TCP and TCP/IP). |
Webdyn S.A. | Webdyn Gateway - WGM30 (M) | Network Gateway: The Webdyngate Modbus30 is a customizable, Web-enabled Modbus gateway providing both local and remote monitoring services for Modbus connected devices. The gateway creates the connection from serial Modbus installations to LAN based networks (Modbus TCP and TCP/IP). |
WebFaqtory | PrintFaqtory | Software - Other: PrintFaqtory replaces your printers (and their consumables) and turns your printed or file reports into real data, in a database and accessible via OPC, DDE, Modbus and ODBC. No matter how complicated are the reports or diverse the devices, PrintFaqtory has the handles all report data requirements. |
WEG | CFW08 Plus Variable Frequency Drive | AC/DC Drive Control: The WEG CFW08 Series of drives features the compact size of a microdrive yet the full functionality of much larger competitors. The CFW08 has extensive programmable control features and flexible mounting and display options. The CFW08 Series comes in three versions: standard NEMA 1, Multipump control, and NEMA 4 Wash Down duty. |
Westermo Data Communications Ltd | DDW-120 Ethernet Extender | Misc. Hardware: Solution for extending an Ethernet network over copper cables. At shorter ranges the data rate will be as high as 15.3 Mbps in both directions. The SHDSL transmission technology used suggests transmission distances of up to 10 km at lower data rates, depending on the quality of the cables; much greater distances have been achieved. |
Western Reserve Controls, Inc. | 1782-JDM DeviceNet to Modbus Gateway | Network Gateway: Provides DeviceNet connectivity for serial devices such as barcode scanners, weigh scales, robots, displays, or drives; provides connectivity to Modbus devices. |
Westlock Controls Corporation | Intellis 7500 | I/O Interface: The Westlock Modbus Intellis I/O module, the MPAC, uses the Modbus RTU protocol to communicate serially with a DCS or PLC via the Westlock NIM (Network Interface Manager). The Modbus protocol establishes a common format for the layout and contents of all message fields. Operating commands, sent via Modbus, communicate through the NIM gateway to up to 1000 control valves connected, on a common data highway. |
Windmill Software Ltd. | Windmill COMIML | Software - SCADA: COMIML lets you read and control almost any serial device communicating over RS-232, RS-422, RS-485 or Modbus. These include such equipment as electronic balances used in a laboratory, GPS receivers used in the field and data loggers used in process plant. The COMIML driver reads data from the PC's COM port, and passes it to the Windmill 6 logging, charting and display programs. Other Windows software, such as Excel or Access, can also be used to display and analyse the data. |
Wingpath Limited | Modsak - Modbus diagnostic program | Software - Testing and Simulation: Modsak tests a devices handling of the Modbus protocol. Software developers can use Modsak to simulate the environment (Modbus masters, slaves and bridges) in which their software has to operate. System integrators can plug Modsak into a system temporarily to replace Modbus components they don't yet have; or when components refuse to talk to each other Modsak can be used to try out different configuration settings. |
Wingpath Limited | ModSlaveSim | Software - Testing and Simulation: ModSlaveSim is a programmable simulator that enables realistic simulation of a Modbus slave in its environment. Connect your Modbus masters to ModSlaveSim, instead of a real Modbus slave device, in order to test and configure the masters. Using a simple control language you can simulate a Modbus slave measuring environment properties (e.g. flow rate), controlling the environment (e.g. opening valves), performing internal calculations (e.g. averages), and responding to Modbus commands from masters. |
Witte Software | Modbus Poll | Software - Testing and Simulation: Modbus Poll is a master simulator for test and debug of slave devices. |
Witte Software | Modbus Slave | Software - Testing and Simulation: Slave simulator for test and debug of master devices |
Witte Software | MBAXP | Software - HMI: ActiveX control for Excel, Visual Basic, Visual C++, Delphi etc. |
WPS Energy Services | eMiner | Monitoring Hardware: eMiner is a low-cost Internet Appliance to easily 'web-enable' Modbus/TCP and Modbus Serial Devices making real-time and historical data accessible to anyone with a browser. |
Xcel Controls Inc | AR2 monitoring system | Monitoring Hardware: AR2 monitoring system keeps you informed of the status of your equipment located across town or across country. |
Yaskawa Electric America, Inc. | V1000-4X Drive | AC/DC Drive Control: The V1000-4X is a version of the standard V1000 in an integral enclosure that meets NEMA type 4X/12 indoor use requirements, UL type 4X/12 standards, and the IP66 rating of IEC 529. This enclosure provides the protection required in tough washdown or dust-tight environments. |
Yaskawa Electric America, Inc. | V1000 Current Vector Drive | AC/DC Drive Control: The V1000 is a compact current vector drive. |
Yaskawa Electric America, Inc. | Z1000 HVAC Drives | AC/DC Drive Control: Z1000 Variable Speed Drives designed for building automation applications such as fans, pumps, and cooling towers through 500 HP |
YieldPoint Inc. | TF Series Temperature Sensors | Sensor: The TEMP (Temperature Evaluation and Monitoring Product-line) is based on a monolithic digital temperature sensor which can monitor and transmit temperature data from up to 10 individual points (i.e., 10 individual sensors). Individual calibration coefficients for sensors are stored in the onboard microcontroller?s Flash EEPROM. |
Yokogawa Corporation of America | DAQWORX | Software - SCADA: DAQWORX allows users to assemble a data acquisition system using Yokogawa recorders, data loggers, the temperature controllers, measuring instruments without the need for programming. For adding functionality, DAQWORX offers an integrated data acquisition software system, allowing customers to connect high added-value software to their existing data acquisition systems to easily expand the range of supported applications. |
Zetron, Inc. | Model 1730 Controller | Controller: Advanced Controller for Larger SCADA Systems |
Copyright © 2005-2019 Modbus Organization, Inc. PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor agreement and privacy policy.
MIO5079A
2-port RS-232 & 1-port Parallel Universal PCI Multi-I/O Board
- Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system.
- Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key.
- High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board.
- Expands two RS-232 serial port with communication speed up to 115.2Kbps.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ±2KV ESD protection for all serial signals.
- Support IEEE 1284-1994 parallel port standard
* ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
* SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port) - Auto-switching between ECP/EPP/SPP/BPP modes without configuration.
- Plug-n-Play, I/O address and IRQ assigned by system.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS.
The majority of today´s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5079A Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5079A is compatible with both 32/64-bit PCI architecture supporting 3.3 and 5V Bus, allowing the board to be installed in virtually any PC system. Furthermore, SUNIX MIO5079A Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, Linux, making it the best and most economical solution for commercial and industrial applications.
Description | |
Product Description | 2-port RS-232 & 1-port Parallel Universal PCI Multi-I/O Board |
General | |
Interface | RS-232 and IEEE1284 |
Controller | SUNIX SUN1989 (16C950 UART Compatible) |
Bus | Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1 |
IRQ & IO | Assigned by System |
Serial Communication | |
Interface | RS-232 |
No. of Port | 2-port |
FIFO | 128 byte (Hardware) |
Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
Baud rate | 50 bps to 115.2 Kbps |
Data bit | 5,6,7,8 |
Stop bit | 1,1.5,2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | None, Xon/Xoff, RTS/CTS |
Protection | ±2KV ESD protection for each signal Human Body Model (HBM) |
PCB connector | DB9 Male |
Parallel Communication | |
Interface | IEEE1284 |
No. of Port | 1-port |
FIFO | 16 byte (Hardware) |
Signal | SPP/ECP/EPP/BPP |
Speed | Maximum 1.8MBps |
PCB connector | 13 x 2 Pin Header |
Cable Connector | DB25 Female |
Driver Support | |
Windows Client | XP / Vista / 7 / 8.x / 10 (X86/X64) |
Windows Server | 2003 / 2008 / 2012 / 2016 (X64) |
Windows Embedded | Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009 |
Linux | Linux 2.x / 3.x / 4.x |
DOS | DOS |
Regulatory Approvals | |
Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, RoHS |
Software | Microsoft WHQL Windows • Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64) • Windows Server: 2003 / 2008 / 2012 / 2016 (X64) |
Environment | |
Operation Temperature | 0 to 60°C (32 to 140°F) |
Operation Humidity | 5 to 95% RH |
Storage Temperature | -20 to 85°C (-4 to 185°F) |
Dimension | |
PCB Dimension | 120 x 82 mm |
Bracket | Standard 121 mm |
Bracket Space | 2 |
Note: * Do not support LPT Key Locker Parallel device. * LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode. * ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode. |
Manual | PCI Multi I/O Manual - 771-9PCIMIO02-S01 |
Datasheet | MIO5079A-Datasheet V10 |
Driver | SUN1999Driver V9.0.5.0 (WHQL) |
Version | 9.0.5.0 |
Update | 2019-07-08 16:17:47 |
Size | 9.2MB |
OS | Windows 10 RS5 (1809) 32/64 bit Windows 10 RS3 (1709) 32/64 bit Windows 10 RS2 (1703) 32/64 bit Windows 10 2016 LTSB 32/64 bit |
Driver | SUN1999Driver V8.2.0.0 (WHQL) |
Version | 8.2.0.0 |
Update | 2019-07-08 16:23:37 |
Size | 4.8MB |
OS | Windows 8.0 32/64 bit Windows Vista SP2 32/64 bit Windows Server 2012 64bit Windows Embedded POSReady 2009 |
Pci Serial Card Driver
Driver | SUN1999Driver V8.1.5.0 (WHQL) |
Version | 8.1.5.0 |
Update | 2019-07-08 16:26:08 |
Size | 4.5MB |
OS |
Driver | WinCE 6.0 Driver V1.2.0.0 |
Version | 1.2.0.0 |
Update | 2019-07-08 17:59:12 |
Size | 301.2KB |
OS |
Driver | WinCE 5.0 Driver V1.1.0.0 |
Version | 1.1.0.0 |
Update | 2019-07-08 18:00:02 |
Size | 280KB |
OS |
Driver | WinCE 4.2 Driver V1.1.0.0 |
Version | 1.1.0.0 |
Update | 2019-07-08 18:00:47 |
Size | 235.6KB |
OS |
Driver | snx_V2.0.4.5 |
Version | 2.0.4.5 |
Update | 2019-04-11 15:20:44 |
Size | 82.6KB |
OS |
Driver | SUNDOS1.00.00.006 |
Version | 1.00.00.006 |
Update | 2014-08-19 10:36:25 |
Size | 21KB |
OS |
MIO5079A
2-port RS-232 & 1-port Parallel Universal PCI Multi-I/O Board
- Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system.
- Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key.
- High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board.
- Expands two RS-232 serial port with communication speed up to 115.2Kbps.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ±2KV ESD protection for all serial signals.
- Support IEEE 1284-1994 parallel port standard
* ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
* SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port) - Auto-switching between ECP/EPP/SPP/BPP modes without configuration.
- Plug-n-Play, I/O address and IRQ assigned by system.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS.
The majority of today´s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5079A Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5079A is compatible with both 32/64-bit PCI architecture supporting 3.3 and 5V Bus, allowing the board to be installed in virtually any PC system. Furthermore, SUNIX MIO5079A Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, Linux, making it the best and most economical solution for commercial and industrial applications.
Description | |
Product Description | 2-port RS-232 & 1-port Parallel Universal PCI Multi-I/O Board |
General | |
Interface | RS-232 and IEEE1284 |
Controller | SUNIX SUN1989 (16C950 UART Compatible) |
Bus | Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1 |
IRQ & IO | Assigned by System |
Serial Communication | |
Interface | RS-232 |
No. of Port | 2-port |
FIFO | 128 byte (Hardware) |
Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
Baud rate | 50 bps to 115.2 Kbps |
Data bit | 5,6,7,8 |
Stop bit | 1,1.5,2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | None, Xon/Xoff, RTS/CTS |
Protection | ±2KV ESD protection for each signal Human Body Model (HBM) |
PCB connector | DB9 Male |
Parallel Communication | |
Interface | IEEE1284 |
No. of Port | 1-port |
FIFO | 16 byte (Hardware) |
Signal | SPP/ECP/EPP/BPP |
Speed | Maximum 1.8MBps |
PCB connector | 13 x 2 Pin Header |
Cable Connector | DB25 Female |
Driver Support | |
Windows Client | XP / Vista / 7 / 8.x / 10 (X86/X64) |
Windows Server | 2003 / 2008 / 2012 / 2016 (X64) |
Windows Embedded | Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009 |
Linux | Linux 2.x / 3.x / 4.x |
DOS | DOS |
Regulatory Approvals | |
Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, RoHS |
Software | Microsoft WHQL Windows • Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64) • Windows Server: 2003 / 2008 / 2012 / 2016 (X64) |
Environment | |
Operation Temperature | 0 to 60°C (32 to 140°F) |
Operation Humidity | 5 to 95% RH |
Storage Temperature | -20 to 85°C (-4 to 185°F) |
Dimension | |
PCB Dimension | 120 x 82 mm |
Bracket | Standard 121 mm |
Bracket Space | 2 |
Note: * Do not support LPT Key Locker Parallel device. * LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode. * ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode. |
Manual | PCI Multi I/O Manual - 771-9PCIMIO02-S01 |
Datasheet | MIO5079A-Datasheet V10 |
Driver | SUN1999Driver V9.0.5.0 (WHQL) |
Version | 9.0.5.0 |
Update | 2019-07-08 16:17:47 |
Size | 9.2MB |
OS | Windows 10 RS5 (1809) 32/64 bit Windows 10 RS3 (1709) 32/64 bit Windows 10 RS2 (1703) 32/64 bit Windows 10 2016 LTSB 32/64 bit |
Driver | SUN1999Driver V8.2.0.0 (WHQL) |
Version | 8.2.0.0 |
Update | 2019-07-08 16:23:37 |
Size | 4.8MB |
OS | Windows 8.0 32/64 bit Windows Vista SP2 32/64 bit Windows Server 2012 64bit Windows Embedded POSReady 2009 |
Driver | SUN1999Driver V8.1.5.0 (WHQL) |
Version | 8.1.5.0 |
Update | 2019-07-08 16:26:08 |
Size | 4.5MB |
OS |
Driver | WinCE 6.0 Driver V1.2.0.0 |
Version | 1.2.0.0 |
Update | 2019-07-08 17:59:12 |
Size | 301.2KB |
OS |
Driver | WinCE 5.0 Driver V1.1.0.0 |
Version | 1.1.0.0 |
Update | 2019-07-08 18:00:02 |
Size | 280KB |
OS |
Driver | WinCE 4.2 Driver V1.1.0.0 |
Version | 1.1.0.0 |
Update | 2019-07-08 18:00:47 |
Size | 235.6KB |
OS |
Driver | snx_V2.0.4.5 |
Version | 2.0.4.5 |
Update | 2019-04-11 15:20:44 |
Size | 82.6KB |
OS |
Driver | SUNDOS1.00.00.006 |
Version | 1.00.00.006 |
Update | 2014-08-19 10:36:25 |
Size | 21KB |
OS |
MIO5079A
2-port RS-232 & 1-port Parallel Universal PCI Multi-I/O Board
- Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system.
- Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key.
- High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board.
- Expands two RS-232 serial port with communication speed up to 115.2Kbps.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ±2KV ESD protection for all serial signals.
- Support IEEE 1284-1994 parallel port standard
* ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
* SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port) - Auto-switching between ECP/EPP/SPP/BPP modes without configuration.
- Plug-n-Play, I/O address and IRQ assigned by system.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS.
The majority of today´s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5079A Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5079A is compatible with both 32/64-bit PCI architecture supporting 3.3 and 5V Bus, allowing the board to be installed in virtually any PC system. Furthermore, SUNIX MIO5079A Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, Linux, making it the best and most economical solution for commercial and industrial applications.
Description | |
Product Description | 2-port RS-232 & 1-port Parallel Universal PCI Multi-I/O Board |
General | |
Interface | RS-232 and IEEE1284 |
Controller | SUNIX SUN1989 (16C950 UART Compatible) |
Bus | Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1 |
IRQ & IO | Assigned by System |
Serial Communication | |
Interface | RS-232 |
No. of Port | 2-port |
FIFO | 128 byte (Hardware) |
Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
Baud rate | 50 bps to 115.2 Kbps |
Data bit | 5,6,7,8 |
Stop bit | 1,1.5,2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | None, Xon/Xoff, RTS/CTS |
Protection | ±2KV ESD protection for each signal Human Body Model (HBM) |
PCB connector | DB9 Male |
Parallel Communication | |
Interface | IEEE1284 |
No. of Port | 1-port |
FIFO | 16 byte (Hardware) |
Signal | SPP/ECP/EPP/BPP |
Speed | Maximum 1.8MBps |
PCB connector | 13 x 2 Pin Header |
Cable Connector | DB25 Female |
Driver Support | |
Windows Client | XP / Vista / 7 / 8.x / 10 (X86/X64) |
Windows Server | 2003 / 2008 / 2012 / 2016 (X64) |
Windows Embedded | Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009 |
Linux | Linux 2.x / 3.x / 4.x |
DOS | DOS |
Regulatory Approvals | |
Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, RoHS |
Software | Microsoft WHQL Windows • Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64) • Windows Server: 2003 / 2008 / 2012 / 2016 (X64) |
Environment | |
Operation Temperature | 0 to 60°C (32 to 140°F) |
Operation Humidity | 5 to 95% RH |
Storage Temperature | -20 to 85°C (-4 to 185°F) |
Dimension | |
PCB Dimension | 120 x 82 mm |
Bracket | Standard 121 mm |
Bracket Space | 2 |
Note: * Do not support LPT Key Locker Parallel device. * LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode. * ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode. |
Pci Serial Port Driver Download
Manual | PCI Multi I/O Manual - 771-9PCIMIO02-S01 |
Datasheet | MIO5079A-Datasheet V10 |
Driver | SUN1999Driver V9.0.5.0 (WHQL) |
Version | 9.0.5.0 |
Update | 2019-07-08 16:17:47 |
Size | 9.2MB |
OS | Windows 10 RS5 (1809) 32/64 bit Windows 10 RS3 (1709) 32/64 bit Windows 10 RS2 (1703) 32/64 bit Windows 10 2016 LTSB 32/64 bit |
Sunix 2 Port Serial Card Driver Download
Driver | SUN1999Driver V8.2.0.0 (WHQL) |
Version | 8.2.0.0 |
Update | 2019-07-08 16:23:37 |
Size | 4.8MB |
OS | Windows 8.0 32/64 bit Windows Vista SP2 32/64 bit Windows Server 2012 64bit Windows Embedded POSReady 2009 |
Driver | SUN1999Driver V8.1.5.0 (WHQL) |
Version | 8.1.5.0 |
Update | 2019-07-08 16:26:08 |
Size | 4.5MB |
OS |
Driver | WinCE 6.0 Driver V1.2.0.0 |
Version | 1.2.0.0 |
Update | 2019-07-08 17:59:12 |
Size | 301.2KB |
OS |
Driver | WinCE 5.0 Driver V1.1.0.0 |
Version | 1.1.0.0 |
Update | 2019-07-08 18:00:02 |
Size | 280KB |
OS |
Driver | WinCE 4.2 Driver V1.1.0.0 |
Version | 1.1.0.0 |
Update | 2019-07-08 18:00:47 |
Size | 235.6KB |
OS |
Pci Serial Port Driver Windows 10
Driver | snx_V2.0.4.5 |
Version | 2.0.4.5 |
Update | 2019-04-11 15:20:44 |
Size | 82.6KB |
OS |
Driver | SUNDOS1.00.00.006 |
Version | 1.00.00.006 |
Update | 2014-08-19 10:36:25 |
Size | 21KB |
OS |
MIO5079A
2-port RS-232 & 1-port Parallel Universal PCI Multi-I/O Board
- Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system.
- Universal PCI compatible with 64/32-bit PCI-X/PCI Bus and 3.3/5V connector key.
- High reliability SUNIX SUN1989 16C950 compatible Multi-IO controller on-board.
- Expands two RS-232 serial port with communication speed up to 115.2Kbps.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ±2KV ESD protection for all serial signals.
- Support IEEE 1284-1994 parallel port standard
* ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port)
* SPP(Standard Parallel Port) / BPP(Bi-direction Parallel Port) - Auto-switching between ECP/EPP/SPP/BPP modes without configuration.
- Plug-n-Play, I/O address and IRQ assigned by system.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS.
The majority of today´s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5079A Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5079A is compatible with both 32/64-bit PCI architecture supporting 3.3 and 5V Bus, allowing the board to be installed in virtually any PC system. Furthermore, SUNIX MIO5079A Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, Linux, making it the best and most economical solution for commercial and industrial applications.
The majority of today´s motherboards are not equipped with any RS-232 or parallel port. With SUNIX MIO5079A Multi I/O board, users can expand two RS-232 and one IEEE1284 parallel ports to their system, allowing them to use serial and parallel devices further. SUNIX MIO5079A is compatible with both 32/64-bit PCI architecture supporting 3.3 and 5V Bus, allowing the board to be installed in virtually any PC system. Furthermore, SUNIX MIO5079A Multi-IO card supports majority of the OS on the market. We provide driver support for Microsoft Windows 32/64-bit platform, Linux, making it the best and most economical solution for commercial and industrial applications.
Description | |
Product Description | 2-port RS-232 & 1-port Parallel Universal PCI Multi-I/O Board |
General | |
Interface | RS-232 and IEEE1284 |
Controller | SUNIX SUN1989 (16C950 UART Compatible) |
Bus | Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1 |
IRQ & IO | Assigned by System |
Serial Communication | |
Interface | RS-232 |
No. of Port | 2-port |
FIFO | 128 byte (Hardware) |
Signal | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI |
Baud rate | 50 bps to 115.2 Kbps |
Data bit | 5,6,7,8 |
Stop bit | 1,1.5,2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | None, Xon/Xoff, RTS/CTS |
Protection | ±2KV ESD protection for each signal Human Body Model (HBM) |
PCB connector | DB9 Male |
Parallel Communication | |
Interface | IEEE1284 |
No. of Port | 1-port |
FIFO | 16 byte (Hardware) |
Signal | SPP/ECP/EPP/BPP |
Speed | Maximum 1.8MBps |
PCB connector | 13 x 2 Pin Header |
Cable Connector | DB25 Female |
Driver Support | |
Windows Client | XP / Vista / 7 / 8.x / 10 (X86/X64) |
Windows Server | 2003 / 2008 / 2012 / 2016 (X64) |
Windows Embedded | Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009 |
Linux | Linux 2.x / 3.x / 4.x |
DOS | DOS |
Regulatory Approvals | |
Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, RoHS |
Software | Microsoft WHQL Windows • Windows Client: XP / Vista / 7 / 8.x / 10 (X86/X64) • Windows Server: 2003 / 2008 / 2012 / 2016 (X64) |
Environment | |
Operation Temperature | 0 to 60°C (32 to 140°F) |
Operation Humidity | 5 to 95% RH |
Storage Temperature | -20 to 85°C (-4 to 185°F) |
Dimension | |
PCB Dimension | 120 x 82 mm |
Bracket | Standard 121 mm |
Bracket Space | 2 |
Note: * Do not support LPT Key Locker Parallel device. * LPT port does not support legacy 278/378 ISA address under Windows nor Linux operation systems, but only DOS mode. * ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode. |
Manual | PCI Multi I/O Manual - 771-9PCIMIO02-S01 |
Datasheet | MIO5079A-Datasheet V10 |
Driver | SUN1999Driver V9.0.5.0 (WHQL) |
Version | 9.0.5.0 |
Update | 2019-07-08 16:17:47 |
Size | 9.2MB |
OS | Windows 10 RS5 (1809) 32/64 bit Windows 10 RS3 (1709) 32/64 bit Windows 10 RS2 (1703) 32/64 bit Windows 10 2016 LTSB 32/64 bit |
Driver | SUN1999Driver V8.2.0.0 (WHQL) |
Version | 8.2.0.0 |
Update | 2019-07-08 16:23:37 |
Size | 4.8MB |
OS | Windows 8.0 32/64 bit Windows Vista SP2 32/64 bit Windows Server 2012 64bit Windows Embedded POSReady 2009 |
Sunix Usb Serial Adapter Driver
Driver | SUN1999Driver V8.1.5.0 (WHQL) |
Version | 8.1.5.0 |
Update | 2019-07-08 16:26:08 |
Size | 4.5MB |
OS |
Driver | WinCE 6.0 Driver V1.2.0.0 |
Version | 1.2.0.0 |
Update | 2019-07-08 17:59:12 |
Size | 301.2KB |
OS |
Driver | WinCE 5.0 Driver V1.1.0.0 |
Version | 1.1.0.0 |
Update | 2019-07-08 18:00:02 |
Size | 280KB |
OS |
Driver | WinCE 4.2 Driver V1.1.0.0 |
Version | 1.1.0.0 |
Update | 2019-07-08 18:00:47 |
Size | 235.6KB |
OS |
Sunix Driver Windows 10
Driver | snx_V2.0.4.5 |
Version | 2.0.4.5 |
Update | 2019-04-11 15:20:44 |
Size | 82.6KB |
OS |
Sunix Io
Driver | SUNDOS1.00.00.006 |
Version | 1.00.00.006 |
Update | 2014-08-19 10:36:25 |
Size | 21KB |
OS |